Advertisement

Characterization of Printed Circuit Boards of Obsolete (PCBs) Aimed at the Production of Copper Nanoparticles

  • Thamiris Auxiliadora Gonçalves MartinsEmail author
  • Karen Espina Gomes
  • Carlos Gonzalo Alvarez Rosario
  • Denise Crocce Romano Espinosa
  • Jorge Alberto Soares Tenório
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)

Abstract

Electronic components, such as printed circuit boards (PCBs), have elements in their composition that present economic value like copper, silver, gold and nickel, besides the metals that are harmful to the environment and to health as lead, mercury and cadmium. Aiming at the recovery of metals for economic purposes and, thus, preventing their inadequate disposal in the environment, the present study presents a route of physical and chemical characterization used to determine the amount of metals present in the PCBs (motherboards) aiming the production of nanoparticles copper. For this, as PCBs were dismantled for later comminution in a knife mill with the opening phases of 9, 3 and 2 mm. Fire-fighting tests were performed for the determination of polymer weakness and digestion acid to determine the concentration of metals present. After characterization of the plates, it was possible to determine that 43% corresponds to the metallic fraction of which 21.5% were copper. After characterization of the boards, it was possible to determine that 43% corresponds to the metallic fraction of which 21.5% were copper.

Keywords

PCBs Motherboard Copper recovery Nanoparticles 

References

  1. 1.
    Zhang L, Xu Z (2016) A review of current progress of recycling technologies for metals from waste electrical and electronic equipment. J Clean Prod 127:19–36.  https://doi.org/10.1016/j.jclepro.2016.04.004CrossRefGoogle Scholar
  2. 2.
    Eng JAC, Cui H, Anderson CG (2016) Literature review of hydrometallurgical recycling of printed circuit boards (PCBs). J Adv Chem Eng 6(1):1–11.  https://doi.org/10.4172/2090-4568.1000142
  3. 3.
    Robinson BH (2009) E-waste: an assessment of global production and environmental impacts. Sci Total Environ 408(2):183–191.  https://doi.org/10.1016/j.scitotenv.2009.09.044CrossRefGoogle Scholar
  4. 4.
    Akcil A et al (2015) Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants—a review. Waste Manage 45:258–271.  https://doi.org/10.1016/j.wasman.2015.01.017CrossRefGoogle Scholar
  5. 5.
    Tuncuk A et al (2012) Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling. Miner Eng 25(1):28–37.  https://doi.org/10.1016/j.mineng.2011.09.019CrossRefGoogle Scholar
  6. 6.
    Veit HM (2001) Emprego do Processamento Mecânico na Reciclagem de Sucatas de Placas de Circuito ImpressoGoogle Scholar
  7. 7.
    Sohaili J, Muniyandi SK, Mohamad SS (2012) A review on printed circuit boards waste recycling technologies and reuse of recovered nonmetallic materials. Int J Sci Eng Res 3(2):1–7. https://doi.org/10.1.1.302.7125
  8. 8.
    Zhou Y, Qiu K (2010) A new technology for recycling materials from waste printed circuit boards. J Hazard Mater 175:823–828.  https://doi.org/10.1016/j.jhazmat.2009.10.083CrossRefGoogle Scholar
  9. 9.
    Kaya M (2016) Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. Waste Manage 57:64–90.  https://doi.org/10.1016/j.wasman.2016.08.004CrossRefGoogle Scholar
  10. 10.
    Júnior SDeSH et al (2013) Processamento de placas de circuito impresso de equipamentos eletroeletrônicos de pequeno porte. Quimica Nova 36(4):570–576CrossRefGoogle Scholar
  11. 11.
    Caldas MPK (2017) Síntese de nanopartículas de prata a partir da reciclagem de placas de circuito impresso, 154 pp. Tese (Doutorado) - Escola Politécnica, Universidade de São Paulo, Departamento de Engenharia Química, São Paulo.  https://doi.org/10.11606/T.3.2017.tde-20072017-151234
  12. 12.
    Cadioli LP, Salla LD (2015) Nanotecnologia: um estudo sobre seu histórico, definição e principais aplicações desta inovadora tecnologia. Revista de Ciências Exatas e Tecnologia 98–105. http://dx.doi.org/10.17921/1890-1793.2006v1n1p98-105
  13. 13.
    Yamane LH, De Moraes VT, Espinosa DCR, Tenório JAS (2011) Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers. Waste Manage (New York, N.Y.) 31(12):2553–2558.  https://doi.org/10.1016/j.wasman.2011.07.006CrossRefGoogle Scholar
  14. 14.
    De Moraes VT (2011) Reciclagem de placas de circuito impresso de aparelhos celulares obsoletos, 2011, 119 pp. Tese (Doutorado) - Escola Politécnica, Universidade de São Paulo, Departamento de Engenharia Química, São PauloGoogle Scholar
  15. 15.
    Zhang S, Forssberg E (1997) Mechanical separation-oriented characterization of electronic scrap. Resour Conserv Recycl 21(4):247–269.  https://doi.org/10.1016/S0921-3449(97)00039-6CrossRefGoogle Scholar
  16. 16.
    De Carvalho MA, De Andrade LM, Espinosa DCR, Tenório JAS (2018) Study of the recovery of copper and silver of printed circuit boards from obsolete computers through one-step acid leaching. Article presented in 4th symposium on urban mining and circular economy (SUM 2018), Italy, May 2018, pp 21–23Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  • Thamiris Auxiliadora Gonçalves Martins
    • 1
    Email author
  • Karen Espina Gomes
    • 2
  • Carlos Gonzalo Alvarez Rosario
    • 1
  • Denise Crocce Romano Espinosa
    • 1
  • Jorge Alberto Soares Tenório
    • 1
  1. 1.Chemical Engineering DepartmentUniversity of São Paulo (USP)São PauloBrazil
  2. 2.Chemical Engineering College of Chemistry of Faculdades Oswaldo CruzSão PauloBrazil

Personalised recommendations