Advertisement

Development of a 2-Dof Parallel Kinematics Machine for Macro Scale Products

  • Nor Liyana MaskuriEmail author
  • Muhamad Husaini Abu Bakar
  • Ahmad Razlee Ab Kadir
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 102)

Abstract

This paper presents a new computer numerical control (CNC). The revolution of a parallel kinematics machine (PKM) is reducing many problems in the manufacturing process from a theoretical and practical point of view. The experimental setup was developed to optimize the kinematics design of a 2 Degree of Freedom (2 DoF) planar parallel manipulator. The excellent workspace design without link collision is presented in this paper. It was observed that increasing the precision in the PKM modeling, reduces the drawback of the existing product. The result is obtained from the various experiment which were plotted graphically and discussed in this paper.

Keywords

Computer numerical control (CNC) Parallel kinematics machine (PKM) 2 degree of freedom (2 DoF) 

Notes

Acknowledgements

All the experiment and analysis conducted under System Engineering and Energy Laboratory, Universiti Kuala Lumpur, Malaysian Spanish Institute, Kulim Kedah, Malaysia.

References

  1. 1.
    Xie, F., Liu, X., Wang, L., Wang, J.: Optimum kinematic design of the 4R 2-DOF parallel mechanism. Tsinghua Sci. Technol. 14(5), 663–668 (2009).  https://doi.org/10.1016/s1007-0214(09)70132-4CrossRefGoogle Scholar
  2. 2.
    Clark, L., Shirinzadeh, B., Bhagat, U., Smith, J., Zhong, Y.: Development and control of a two DOF linear–angular precision positioning stage. Mechatronics 32, 34–43 (2015).  https://doi.org/10.1016/j.mechatronics.2015.10.001CrossRefGoogle Scholar
  3. 3.
    Balchanowski, J.: General Method of Structural Synthesis of Parallel Mechanism, pp. 256–268; 644–651 (2016)CrossRefGoogle Scholar
  4. 4.
    Yang, Y., Yang, Y.: Optimal design of a 2-DOF planar parallel manipulator. In: 2010 International Conference on Mechanic Automation and Control Engineering (2010).  https://doi.org/10.1109/mace.2010.5535346c
  5. 5.
    Wu, C., Liu, X., Wang, L., Wang, J.: Optimal design of spherical 5R parallel manipulators considering the motion/force transmissibility. J. Mech. Des. 132(3), 031002 (2010).  https://doi.org/10.1115/1.4001129CrossRefGoogle Scholar
  6. 6.
    Qu, J., Chen, W., Zhang, J., Chen, W.: A piezo-driven 2-DOF compliant micropositioning stage with remote center of motion. Sens. Actuators, A 239, 114–126 (2016).  https://doi.org/10.1016/j.sna.2016.01.025CrossRefGoogle Scholar
  7. 7.
    Lian, B., Sun, T., Song, Y., Wang, X.: Passive and active gravity compensation of horizontally-mounted 3-R P S parallel kinematic machine. Mech. Mach. Theory 104, 190–201 (2016).  https://doi.org/10.1016/j.mechmachtheory.2016.05.021CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Nor Liyana Maskuri
    • 1
    Email author
  • Muhamad Husaini Abu Bakar
    • 1
  • Ahmad Razlee Ab Kadir
    • 1
  1. 1.System Engineering and Energy LaboratoryMalaysian Spanish Institute - Universiti Kuala LumpurKulimMalaysia

Personalised recommendations