Advertisement

Synthesis of Polypropylene Solid State Electrolytes for Batteries Using a Polymerization Heat Chamber

  • Muhamad Husaini Abu BakarEmail author
  • Kartina Farah Hana
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 102)

Abstract

Polypropylene solid-state electrolytes are a material of solid electrolytes. The solid electrolytes were prepared by mixing a hydroxide solution and polypropylene. However, the electrolyte is very sensitive to the temperature change. Temperature is an essential factor in producing an optimal cheap solid-state electrolyte. This study aimed at determining the temperature effect on the solid state electrolyte polymerization. The different solid-state electrolyte were synthesized by varying the number of molarity of the potassium hydroxide, the weight of the polypropylene and the temperature that was used to heat the polypropylene. The solution molarities that were used are 1, 2, and 3 M and the propylene weight was 5, 10 and 15 g and the six temperature levels were used, i.e. 160, 170, 180, 190, 200, and 210 °C. As a result, the voltage is 1.1 V for 2 M of KOH, and the temperature is 180 for the highest voltage production. As a conclusion, with the increase of the molarity of KOH the voltage also increases. A specific temperature needs to be determined to ensure that the maximum voltage is produced by the battery with the solid-state electrolyte. This temperature and molar configuration is important to search a better solid state electrolyte for the battery.

Keywords

Polypropylene (PP) Solid-state electrolyte Potassium hydroxide solution (KOH) Battery 

Notes

Acknowledgements

All the experiment and analysis conducted by System Engineering and Energy Laboratory, Universiti Kuala Lumpur, Malaysian Spanish Institute, Kulim Kedah, Malaysia.

References

  1. 1.
    Takada, K.: Progress in solid electrolytes toward realizing solid-state lithium batteries. J. Power Sources 394, 74–85 (2018).  https://doi.org/10.1016/j.jpowsour.2018.05.003CrossRefGoogle Scholar
  2. 2.
    Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y., Li, B.: Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries. J. Power Sources 389, 120–134 (2018).  https://doi.org/10.1016/j.jpowsour.2018.04.019CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Muhamad Husaini Abu Bakar
    • 1
    Email author
  • Kartina Farah Hana
    • 1
  1. 1.System Engineering and Energy LaboratoryMalaysian Spanish Institute, Universiti Kuala LumpurKulimMalaysia

Personalised recommendations