Theoretical Study of Swelling of Structural Materials in Light Water Reactors at High Fluencies

  • S. I. GolubovEmail author
  • A. V. Barashev
Conference paper
Part of the The Minerals, Metals & Materials Series book series (MMMS)


A mean-field, cluster dynamics model of the microstructure evolution in austenitic steels of light water reactors which reproduces the incubation period of swelling has been developed for the first time. In agreement with observations, it predicts that, although the void nucleation starts from the very beginning of irradiation, their growth beyond certain, relatively small size is delayed until the onset of the transient period of swelling. Such a delayed growth of voids is explained by the frequent interaction of voids randomly distributed over the volume with one-dimensionally migrating clusters of self-interstitial atoms, which are produced in cascades of atomic displacements. The incubation period of swelling is followed by the transient stage, when voids start to grow with increasing rate due to development of the experimentally-observed spatial correlations between voids and extended defects, such as second-phase precipitates and dislocations, which screen voids from the mobile clusters. A critical role of residual gas on void nucleation, which diminishes importance of He atoms from transmutation reactions, is revealed.


Swelling Reactor materials Theory 



Research was supported by the Light Water Reactor Sustainability Program, Office of Nuclear Energy, Science and Technology, U.S. Department of Energy.


  1. 1.
    C. Cawthorne, E.J. Fulton, Voids in irradiated stainless steel. Nature 216, 575–576 (1967)CrossRefGoogle Scholar
  2. 2.
    R. Bullough, B.L. Eyre, K. Krishan, Cascade damage effects on swelling of irradiated materials. Proc. R. Soc. Lond. Ser. A 346, 81–102 (1975)CrossRefGoogle Scholar
  3. 3.
    S.J. Zinkle, P. Maziasz, R.E. Stoller, Dose dependence of the microstructural evolution in neutron-irradiated austenitic stainless steel. J. Nucl. Mater. 206, 266–286 (1993)CrossRefGoogle Scholar
  4. 4.
    S.I. Porollo et al., in Determination of the Lower Temperature Limit of Void Swelling of Stainless Steels at PWR-Relevant Displacement Rates, ed. by M.L. Grossbeck, T.R. Allen, R.G. Lott, A.S. Kumar. The Effects of Radiation on Materials, 21st International Symposium, ASTM STP1447, ASTM International, West Conshohocken, PA (2003)Google Scholar
  5. 5.
    D.J. Edwards et al., Influence of irradiation temperature and dose gradients of the microstructural evolution of neutron-irradiated 316SS. J. Nucl. Mater. 317, 32–45 (2003)CrossRefGoogle Scholar
  6. 6.
    H.M. Chung, Assessment of Void Swelling in Austenitic Stainless Steel Core Internals. NUREG/CR-6897, ANL-04/28, Argonne National Laboratory, December 2004Google Scholar
  7. 7.
    D.J. Edwards et al., Nano-cavities observed in a 316SS PWR flux thimble tube irradiated to 33 and 70 dpa. J. Nucl. Mater. 384, 249–255 (2009)CrossRefGoogle Scholar
  8. 8.
    L. Fournier et al., in Cluster Dynamic Prediction of the Microstructure Evolution of 300-Series Austenitic Stainless Steels Under Irradiation: Influence of Helium, ed. by J.T. Busby, G. Ilevbare, P.L. Andresen. 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 1–7 Aug 2011, Colorado Springs, Colorado, USAGoogle Scholar
  9. 9.
    R.E. Stoller, A.V. Barashev, S.I. Golubov, Low-temperature Swelling in LWR Internal Components: Current Data and Modeling Assessment. Oak Ridge National Laboratory, ORNL/LTR-2012/390, 2012Google Scholar
  10. 10.
    R.E. Stoller, A.V. Barashev, S.I. Golubov, The Influence of Helium on Low-temperature Swelling in LWR Internal Components. Oak Ridge National Laboratory, ORNL/LTR-2013/200, May 2013Google Scholar
  11. 11.
    L. Fournier et al., in Cluster Dynamic Prediction of Void Swelling in Austenitic Stainless Steals Irradiated Under PWR and FBR Conditions. 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, 11–15 Aug 2013, Ashville, NC, USAGoogle Scholar
  12. 12.
    R.E. Stoller, S.I. Golubov, A.V. Barashev, in Low-Temperature Swelling in LWR Internal Components: A Computational Assessment. 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, Ottawa, Ontario, Canada, 9–12 Aug 2015Google Scholar
  13. 13.
    R.E. Stoller, Primary Radiation Damage Formation, in Comprehensive Nuclear Materials, ed. by R.J.M. Konings, T.R. Allen, R.E. Stoller, S. Yamanaka (Elsevier Ltd., Amsterdam, 2012), pp. 293–332CrossRefGoogle Scholar
  14. 14.
    I.A. Portnykh et al., The mechanism of stress influence on swelling of 20% cold-worked 16Cr15Ni2MoTiMnSi steel. J. Nucl. Mater. 367–370, 925–929 (2007)CrossRefGoogle Scholar
  15. 15.
    F. Garner, D.S. Gelles, in Neutron-induced Swelling of Commercial Alloys at Very High Exposures, ed. by N.H.N. Packan, R.E. Stoller, A.S. Kumar. Effects of irradiation on materials: 14th International Symposium (V. II0 ASTM STP 1046, American Society for Testing and Materials, Philadelphia, pp. 673–683 (1990)Google Scholar
  16. 16.
    A.V. Barashev, S.I. Golubov, Unlimited damage accumulation in metallic materials under cascade-damage conditions. Philos. Mag. 89, 2833–2860 (2009)CrossRefGoogle Scholar
  17. 17.
    S.I. Golubov, A.V. Barashev, R.E. Stoller, Radiation Damage Theory, in Comprehensive Nuclear Materials, ed. by R.J.M. Konings, T.R. Allen, R.E. Stoller, S. Yamanaka (Elsevier Ltd., Amsterdam, 2012), pp. 357–391CrossRefGoogle Scholar
  18. 18.
    B.N. Singh, A.J.E. Foreman, H. Trinkaus, Radiation hardening revisited: role of intracascade clustering. J. Nucl. Mater. 249, 103–115 (1997)CrossRefGoogle Scholar
  19. 19.
    A.V. Barashev, S.I. Golubov, R.E. Stoller, A Model of Radiation-Induced Microstructural Evolution. Oak Ridge National Laboratory, ORNL Report ORNL/L TR-2014/487, 2014Google Scholar
  20. 20.
    S.I. Golubov et al., Grouping method for the approximate solution of a kinetic equation describing the evolution of point-defect clusters. Philos. Mag. A 81, 643–658 (2001)CrossRefGoogle Scholar
  21. 21.
    S.I. Golubov, R.E. Stoller, S.J. Zinkle, An Improved Solution to the Kinetic Equations Describing Defect Cluster Dynamics During Irradiation or Thermal Ageing. GEN-IV Nuclear Energy System, ORNL-GEN4/LTR-06-012, 2006Google Scholar
  22. 22.
    S.I. Golubov et al., Kinetics of coarsening of helium bubbles during implantation and post-implantation annealing. J. Nucl. Mater. 361, 149–159 (2007)CrossRefGoogle Scholar
  23. 23.
    N.F. Carnahan, K.E. Starling, Equation of state for nonattracting rigid spheres. J. Chem. Phys. 51, 635–636 (1969)CrossRefGoogle Scholar
  24. 24.
    R.E. Stoller, Modeling dislocation evolution in irradiated alloys. Met. Trans. 21A, 1829–1837 (1990)CrossRefGoogle Scholar
  25. 25.
    K. Fujii et al., in Swelling in 316 Stainless Steel Irradiated to 53 dpa in a PWR. Proceedings of 10th International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, NACE/ANS/TMS, 5–9 Aug 2001, Lake Tahoe, NVGoogle Scholar
  26. 26.
    S.I. Golubov, B.N. Singh, H. Trinkaus, On recoil-energy-dependent defect accumulation in pure copper. Part II. Theoretical treatment. Philos. Mag. Series A 81, 2533–2552 (2001)CrossRefGoogle Scholar

Copyright information

© The Minerals, Metals & Materials Society 2019

Authors and Affiliations

  1. 1.Materials Science and Technology Division, Oak Ridge National LaboratoryOak RidgeUSA
  2. 2.Department of Materials Science and Engineering, Center for Materials ProcessingUniversity of TennesseeKnoxvilleUSA

Personalised recommendations