Advertisement

Best Available Technologies (BAT) for On-Site and Near-by Generation of Heat for NZEB

  • Sašo MedvedEmail author
  • Suzana Domjan
  • Ciril Arkar
Chapter
Part of the Springer Tracts in Civil Engineering book series (SPRTRCIENG)

Abstract

In the European Union, heat is dominant form of energy needed in buildings. More than 50% of total final energy demand in EU is in form of heat and more that 80% of heat is needed at temperatures less than 250 °C. In buildings, heat is needed for space heating, domestic hot water heating, and air-conditioning and for space cooling when cold is produced by heat-driven sorption systems and, in small amounts, for cooking. Heat generators are appliances that convert the internal energy of am energy carrier and exchange heat to the heat transfer fluid at the highest energy efficiency and the lowest environmental impact as possible. In this chapter, the best available technologies for the on-site generation of the heat from fossil fuels and renewable energy sources are presented, as well as the advantages of near-by district heating systems.

References

  1. European Heat Pump Association (2005)Google Scholar
  2. Nussbaumer T et al (2008) Particulate emissions from biomass combustion in IEA countries. IES Task 32, Swiss Federal Office of EnergyGoogle Scholar
  3. Oland CB (1996) Guide to low-emissions boiler and combustion equipment selection. Oak Ridge National LaboratoryGoogle Scholar
  4. Pardo N et al (2012) Heat and cooling demand and market perspective. JRC Scientific and Policy Reports, EC Joint Research Centre, LuxembourgGoogle Scholar
  5. SOLARGE (2004) Enlarging solar thermal system in multi-family-houses, hotels, public and social buildings in Europe, EIALT/EIE/04/082/2004.dsGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Faculty of Mechanical EngineeringUniversity of LjubljanaLjubljanaSlovenia

Personalised recommendations