Advertisement

Corrosion Study of Ti5Al4V and Ti6Al4V in Different Simulated Body Fluids

  • M. P. NikolovaEmail author
  • E. H. Yankov
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 98)

Abstract

The (α + β) Ti6Al4V alloy is widely used in different industrial applications and in medicine. The decrease in the content of the α-strengthening element Al in Ti5Al4V as opposed to conventional Ti6Al4V alloy reduces the hardness as Al is a solid solution hardener but simultaneously, the alloy is expected to have lower cytotoxicity, improved plasticity and low precipitation hardening ability at precipitation temperature. The role of the alloying elements and the influence of heat treatment on corrosion resistance of Ti5Al4V and Ti6Al4V alloys have been studied after a short and long-term immersion in Ringer (RS), phosphate buffer saline (PBS) with and without the addition of H2O2, and 5 M HCl at 37 ± 0.1 °C. It has been found out that lower pH and higher Cl concentration in RS make the surface of the alloys more prone to pitting corrosion and showing nobler corrosion potentials at the same time, in contrast to PBS where salt films of insoluble products are formed on some pits. The potentiodynamic polarisation measurements show higher anodic reaction rate after a 30-days’ period of immersion in PBS and H2O2 for both alloys. The dissolution of Ti, Al, and V and oxidation in 5 M HCl are the highest for solution treated Ti6Al4V and Ti5Al4V alloys, while the corrosion rate for the 10-days’ period in the acid was the lowest for the as-received Ti5Al4V.

Keywords

Ti6Al4V Heat treatment Microstructure Pits SEM-EDS Corrosion behavior 

Notes

Acknowledgements

The study was supported by contract of University of Ruse “Angel Kanchev”, № BG05M2OP001-2.009-0011-C01, “Support for the development of human resources for research and innovation at the University of Ruse “Angel Kanchev”. The project is funded with support from the Operational Program “Science and Education for Smart Growth 2014–2020” financed by the European Social Fund of the European Union.

References

  1. 1.
    Nag, S., Banerjee, R., Stechschulte, J., Fraser, H.L.: Comparison of microstructural evolution in Ti-Mo-Zr-Fe and Ti-15Mo biocompatible alloys. J. Mater. Sci. Mater. Med. 679–85 (2005)Google Scholar
  2. 2.
    Manam, N.S., Harun, W.S.W., Shri, D.N.A., Ghani, S.A.C., Kurniawan, T., Ismail, M.H., Ibrahim, M.H.I.: Study of corrosion in biocompatible metals for implants: a review. J Alloys Compnd. 701, 698–715 (2017)CrossRefGoogle Scholar
  3. 3.
    Atapour, M., Pilchak, A.L., Frankel, G.S., Williams, J.C.: Corrosion behavior of β titanium alloys for biomedical applications. Mater. Sci. Eng., C 31, 885–891 (2011)CrossRefGoogle Scholar
  4. 4.
    Hiromoto, S.: Corrosion of metallic biomaterials in cell culture environments. Electrochem. Soc. Interface 41–44 (2008)Google Scholar
  5. 5.
    Höhn, S., Virtanen, S.: Effect of inflammatory conditions and H2O2 on bare and coated Ti–6Al–4 V surfaces: Corrosion behavior, metal ion release and Ca-P formation under long-term immersion in DMEM. Appl. Surf. Sci. 357, 101–111 (2015)CrossRefGoogle Scholar
  6. 6.
    Bearinger, J.P., Orme, C.A., Gilbert, J.L.: Effect of hydrogen peroxide on titanium surfaces: in situ imaging and step-polarization impedance spectroscopy of commercially pure titanium and titanium, 6-aluminum 4-vanadium. J. Biomed. Mater. Res. 67, 702–712 (2003)CrossRefGoogle Scholar
  7. 7.
    Dissemond, J.: Die Bedeutung des pH-Wertes für die Wundheilung. Hartmann Wund Forum 1, 15–19 (2006)Google Scholar
  8. 8.
    Wang, J.L., Liu, R.L., Majumdar, T., Mantri, S.A., Ravi, V.A., Banerjee, R., Birbilis, N.: A closer look at the in vitro electrochemical characterisation of titanium alloys for biomedical applications using in-situ methods. Acta Biomater. 54, 469–478 (2017)CrossRefGoogle Scholar
  9. 9.
    Brunette, D.M.: Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses, and Medical Applications. Springer, Berlin, New York (2001)CrossRefGoogle Scholar
  10. 10.
    Krawiec, H., Vignal, V., Loch, J., Erazmus-Vignal, P.: Influence of plastic deformation on the microstructure and corrosion behaviour of Ti–10Mo–4Zr and Ti–6Al–4 V alloys in the Ringer’s solution at 37 °C. Corros. Sci. 96, 160–170 (2015)CrossRefGoogle Scholar
  11. 11.
    Cvijovic´-Alagic´, I., Cvijovic´, Z., Bajat, J., Rakin, M.: Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys. Corros. Sci. 83, 245–254 (2014)Google Scholar
  12. 12.
    Metikoš-Hukovic´, M., Kwokal, A., Piljac, J.: The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution. Biomaterials 24, 3765–3775 (2003)Google Scholar
  13. 13.
    Nikolova, M.P., Yankov, E., Petrov P, Nikolov, D., Valkov, S., Zaharieva, V., Ormanova, M.: Phase and mechanical changes of Ti5AL4V alloy after heat treatment in vacuum. In: METAL 2017–26th International Conference on Metallurgy and Materials, Conference Proceedings, pp. 1899–1904 (2017)Google Scholar
  14. 14.
    Geetha, M., Mudali, U.K., Gogia, A.K., Asokamani, R., Raj, B.: Influence of microstructure and alloying elements on corrosion behavior of Ti–13Nb–13Zr alloy. Corros. Sci. 46(4), 877–892 (2004)CrossRefGoogle Scholar
  15. 15.
    Xu, Y., Lu, Y., Sundberg, K.L., Liang, J., Sisson Jr., R.D.: Effect of annealing treatments on the microstructure, mechanical properties and corrosion behavior of direct metal laser sintered Ti-6Al-4 V. J. Mater. Eng. Perform. 26(6), 2572–2582 (2017)CrossRefGoogle Scholar
  16. 16.
    Hack, H.P.: Evaluating galvanic corrosion. In: ASM International 13(A). Corrosion: Fundamental Testing and Protection, ASM International, Materials Park, OH, p. 563 (2003)Google Scholar
  17. 17.
    Metikos-Hukovic, M., Kwokal, A., Piljac, J.: The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution. Biomaterials 24, 3765–3775 (2003)CrossRefGoogle Scholar
  18. 18.
    Milosev, I., Metikos-Hukovic, M., Strehblow, H.: Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy. Biomaterials 21, 2103–2113 (2000)CrossRefGoogle Scholar
  19. 19.
    Macdonald, D.D.: Point defect model for passive state. J. Electrochem. Soc. 139, 3434–3449 (1992)CrossRefGoogle Scholar
  20. 20.
    Karimi, S.: Corrosion behavior of metallic bio-implant alloys. Ph.D. thesis, University of British Columbia, Vancouver, Canada, p. 206 (2014)Google Scholar
  21. 21.
    Barao, V.A.R., Mathew, M.T., Assuncao, W.G., Yuan, J.C., Wimmer, M.A., Sukotjo, C.: Stability of cp-Ti and Ti-6Al-4 V alloy for dental implants as a function of saliva pH—an electrochemical study. Clin. Oral Impl. Res. 23, 1055–1062 (2012)CrossRefGoogle Scholar
  22. 22.
    Frankel, G.S.: Pitting corrosion of metals a review of the critical factors. J. Electrochem. Soc. 145(6), 2186–2198 (1998)CrossRefGoogle Scholar
  23. 23.
    Hang, R., Ma, S., Ji, V., Chu, P.K.: Corrosion behavior of NiTi alloy in fetal bovine serum. Electrochim. Acta 55, 5551–5560 (2010)CrossRefGoogle Scholar
  24. 24.
    Munirathinam, B., Narayanan, R., Neelakantan, L.: Electrochemical and semiconducting properties of thin passive film formed on titanium in chloride medium at various pH conditions. Thin Solid Films 598, 260–270 (2016)CrossRefGoogle Scholar
  25. 25.
    Hong, S.B., Eliaz, N., Sachs, E.M., Allen, S.M., Latanision, R.M.: Corrosion behavior of advanced titanium-based alloys made by three-dimensional printing (3DPTM) for biomedical applications. Corros. Sci. 43, 1781–1791 (2001)CrossRefGoogle Scholar
  26. 26.
    Mao, C., Li, H., Fuzhai, C., Feng, Q.: Oriented growth of phosphates on polycrystalline titanium in a process mimicking biomineralization. J. Cryst. Growth 206, 308–321 (1999)CrossRefGoogle Scholar
  27. 27.
    Liu, X., Ramsey, M.M., Chen, X., Koley, D., Whiteley, M., Bard, A.J.: Real-time mapping of a hydrogen peroxide concentration profile across a polymicrobial bacterial bioflm using scanning electrochemical microscopy. Proc. Natl. Acad. Sci. U.S.A. 108, 2668–2673 (2011)CrossRefGoogle Scholar
  28. 28.
    Zhang, Y., Addison, O., Yu, F., Troconis, B.C.R., Scully, J.R., Davenport, A.J.: Time-dependent enhanced corrosion of Ti6Al4V in the presence of H2O2 and albumin. Sci. Rep. 8, 3185 (2018)CrossRefGoogle Scholar
  29. 29.
    Fonseca, C., Barbosa, M.A.: Corrosion behaviour of titanium in biofluids containing H2O2 studied by electrochemical impedance spectroscopy. J. Corros. Sci. 43, 547–559 (2001)CrossRefGoogle Scholar
  30. 30.
    Handzlik, P., Fitzner, K.: Corrosion resistance of Ti and Ti−Pd alloy in phosphate buffered saline solutions with and without H2O2 addition Trans. Nonferrous Met. Soc. China 23, 866–875 (2013)CrossRefGoogle Scholar
  31. 31.
    Yu, F., Addison, O., Davenport, A.J.: A synergistic effect of albumin and H2O2 accelerates corrosion of Ti6Al4V. Acta Biomater. 26, 355–365 (2015)CrossRefGoogle Scholar
  32. 32.
    Shukla, A.K., Balasubramaniam, R., Bhargava, S.: Properties of passive film formed on CP titanium, Ti–6Al–4 V and Ti–13.4Al–29Nb alloys in simulated human body conditions. Intermetallics 13, 631–637 (2005)Google Scholar
  33. 33.
    Ferraris, S., Spriano, S., Pan, G., Venturello, A., Bianchi, C.L., Chiesa, R., Faga, M.G., Maina, G., Vernè, E.: Surface modification of Ti–6Al–4 V alloy for biomineralization and specific biological response: Part I. Inorganic modification. J. Mater. Sci. Mater. Med. 22, 533–545 (2011)Google Scholar
  34. 34.
    Khan, M.A., Williams, R.L., Williams, D.F.: The corrosion behaviour of Ti-6Al-4 V, Ti-6Al-7Nb and Ti-13Nb-13Zr in protein solutions. Biomaterials 20, 631–637 (1999)CrossRefGoogle Scholar
  35. 35.
    Elmer, J.W., Palmer, T.A., Babu, S.S., Zhang, W., DebRoy, T.: Phase transformation dynamics during welding of Ti–6Al–4V. J. Appl. Phys. 95, 8327–8340 (2004)CrossRefGoogle Scholar
  36. 36.
    Yu, C.Y., Yang, L.X., Shen, C.C., Luan, B., Perng, T.P.: Corrosion behavior of thermohydrogen processed Ti6Al4V. Scripta Mater. 56(12), 1019–1022 (2007)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Department of Material Science and TechnologyUniversity of Ruse “A. Kanchev”RuseBulgaria

Personalised recommendations