Advertisement

Probability of Failure Assessment of Building Using Traditional and Enhanced Monte Carlo Simulation Techniques

  • Badreddine ChemaliEmail author
  • Boualem Tiliouine
Conference paper
Part of the Advances in Science, Technology & Innovation book series (ASTI)

Abstract

The main objective of this work was to evaluate the influence of the randomness of damping on the peak response of structure under rotating machine vibrations. Two methods: Traditional and Enhanced Monte Carlo Simulation techniques were used for a quantitative analysis of the failure probability for an industrial building in the neighborhood of a resonant frequency. The results show that excellent agreement was obtained using these methods for values of covariance of damping equal or less than 60%. However, for larger values, more important difference in results between both methods was observed for structures with light damping. Moreover, computer time savings were achieved by both methods and time domain solution strategies to evaluate sensitivity functions for dynamic systems with large number of degrees of freedom were discussed.

Keywords

Peak response Industrial building Monte Carlo simulation Failure probability Sensitivity functions 

References

  1. 1.
    Li, Q.S., Xiao, Y.Q., Wong, C.K., Jeary, A.P.: Field measurements of wind effects on the tallest building in Hong Kong. Struct. Des. Tall Spec. Build. 12, 67–82 (2003)Google Scholar
  2. 2.
    Butterworth, J., Lee, J.H., Davidson, B.: Experimental determination of modal damping from full scale testing. In: 13th World Conference on Earthquake Engineering, Vancouver, Canada, 2004, Paper No 310Google Scholar
  3. 3.
    Kareem, A., Gurley, K.: Damping in structures: evaluation and treatment of uncertainty. J. Wind Eng. Ind. Aerodyn. 59, 131–157 (1996)CrossRefGoogle Scholar
  4. 4.
    Tobit, J.: Evaluation of non-stationary damping characteristics of structures under earthquake excitations. J. Wind Eng. Ind. Aerodyn. 59(2, 3) 283–298 (1996)Google Scholar
  5. 5.
    Cao, Y., Hussaini, M.Y., Zang, T.A.: Exploitation of sensitivity derivates for improving sampling methods. AIAA J. 42, 815–822 (2004)CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Ecole Nationale PolytechniqueEl-HarrachAlgeria

Personalised recommendations