Advertisement

Tool Exchangeable Grasp/Assembly Planner

  • Kensuke Harada
  • Kento Nakayama
  • Weiwei Wan
  • Kazuyuki Nagata
  • Natsuki Yamanobe
  • Ixchel G. Ramirez-Alpizar
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 867)

Abstract

This paper proposes a novel assembly planner for a manipulator which can simultaneously plan assembly sequence, robot motion, grasping configuration, and exchange of grippers. Our assembly planner assumes multiple grippers and can automatically selects a feasible one to assemble a part. For a given AND/OR graph of an assembly task, we consider generating the assembly graph from which assembly motion of a robot can be planned. The edges of the assembly graph are composed of three kinds of paths, i.e., transfer/assembly paths, transit paths and tool exchange paths. In this paper, we first explain the proposed method for planning assembly motion sequence including the function of gripper exchange. Finally, the effectiveness of the proposed method is confirmed through some numerical examples and a physical experiment.

References

  1. 1.
    de Mello, L.S.M., Sanderson, A.C.: And/Or graph representation of assembly plans. CMU Research Showcase, CMU-RI-TR-86-8 (1986)Google Scholar
  2. 2.
    de Mello, L.S.M., Sanderson, A.C.: Automatic generation of mechanical assembly sequences. CMU Research Showcase, CMU-RI-TR-88-19 (1988)Google Scholar
  3. 3.
    Kwak, S.J., Hasegawa, T., Chung, S.Y.: A framework on automatic generation of contact state graph for robotic assembly. Adv. Robot. 25(13–14), 1603–1625 (2011)CrossRefGoogle Scholar
  4. 4.
    Wilson, R.H., Latombe, J.-C.: Geometric reasoning about mechanical assembly. Artif. Intell. 71(2), 371–396 (1994)MathSciNetCrossRefGoogle Scholar
  5. 5.
    Heger, F.W., Singh, S.: Robust robotic assembly through contingencies, plan repair and re-planning. In: IEEE International Conference on Robotics and Automation (2010)Google Scholar
  6. 6.
    Thomas, U., Stouraitis, T., Roa, M.A.: Flexible assembly through integrated assembly sequence planning and grasp planning. In: IEEE International Conference on Automation, Science and Engineering (2015)Google Scholar
  7. 7.
    Dogar, M., et al.: Multi-robot grasp planning for sequential assembly operations. In: IEEE International Conference on Robotics and Automation (2015)Google Scholar
  8. 8.
    Wan, W., Harada, K.: Integrated assembly and motion planning using regrasp graph. Robot. Biomimetics 3, 18 (2016)Google Scholar
  9. 9.
    Siméon, T., Laumond, J.P., Cortés, J., Sahbani, A.: Manipulation planning with probabilistic roadmaps. Int. J. Robot. Res. 23(7–8), 729–746 (2004)CrossRefGoogle Scholar
  10. 10.
    Harada, K., Tsuji, T., Laumond, J.-P.: A manipulation motion planner for dual-arm industrial manipulators. In: IEEE International Conference on Robotics and Automation (2014)Google Scholar
  11. 11.
    Vahrenkamp, N., Asfour, T., Dillmann, R.: Simultaneous grasp and motion planning. Robot. Autom. Mag. 19, 43 (2012)CrossRefGoogle Scholar
  12. 12.
    Wan, W., Harada, K.: Developing and comparing single-arm and dual-arm regrasp. Robot. Autom. Lett. 1(1), 243–250 (2016)CrossRefGoogle Scholar
  13. 13.
    Harada, K., Kaneko, K., Kanehiro, F.: Fast grasp planning for hand/arm systems based on convex model. In: IEEE International Conference on Robotics and Automation (2008)Google Scholar
  14. 14.
    Harada, K., et al.: Grasp planning for parallel grippers with flexibility on its grasping surface. In: IEEE International Conference on Robotics and Biomimetics (2011)Google Scholar
  15. 15.
    Lozano-Pérez, T., Kaelbling, L.P.: A constraint-based method for solving sequential manipulation planning problems. In: IEEE/RSJ International Conference on Intelligent Robots and Systems (2014)Google Scholar
  16. 16.
    Harada, K., et al.: Stability of soft-finger grasp under gravity. In: IEEE International Conference on Robotics and Automation (2014)Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Kensuke Harada
    • 1
    • 2
  • Kento Nakayama
    • 1
  • Weiwei Wan
    • 1
    • 2
  • Kazuyuki Nagata
    • 2
  • Natsuki Yamanobe
    • 2
  • Ixchel G. Ramirez-Alpizar
    • 1
  1. 1.Graduate School of Engineering ScienceOsaka UniversitySuitaJapan
  2. 2.Intelligent Systems Research InstituteNational Institute of Advanced Industrial Science and Technology (AIST)ToyonakaJapan

Personalised recommendations