Plasma Techniques for Production of Permanent Hydrophilic Polymer Surfaces for Biomedical Applications

  • Hans J. Griesser
  • Jonathan H. Hodgkin
  • Robert Schmidt

Abstract

Plasma surface treatments and plasma polymer coatings employing a variety of gases and monomers were used to produce surfaces of increased hydrophilicity on poly(tetrafluoroethylene) (PTFE) and fluorinated ethylene-propylene (FEP). The surface treatments carried out by exposure to plasmas of the non-depositing gases air, oxygen, argon, and water conferred greatly improved wettability by distilled water to the surface of these fluorocarbon polymers. Short plasma treatment times, of the order of 10 to 20 sec., were shown to be sufficient; longer treatment times were found to produce no additional benefit. The water contact angles did not change over periods of 12 to 13 months of storage of the sample at ambient temperature. Deposition of plasma polymer films onto the fluorocarbon polymers also produced surfaces that were wettable by water, to a degree that depended on the monomer and the plasma conditions. Experiments with growth of bovine endothelial cells showed improved performance of the various plasma treated samples over PTFE controls. Surface spectroscopic analysis has allowed a partial identification of the chemical groups that confer this improved wettability and bioresponse.

Keywords

Contact Angle Plasma Treatment Water Contact Angle Plasma Treated Sample Bovine Endothelial Cell 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    H. Yasuda, J. Macromol. Sci.-Chem., A10, 383 (1976).Google Scholar
  2. 2.
    I. H. Coopes & K. J. Gifkins, J. Macromol. Sci.-Chem., A17, 217 (1982).Google Scholar
  3. 3.
    H. F. Winters, R. P. H. Chang, C. J. Mogab, J. Evans, J. A. Thornton & H. Yasuda, Mater. Sci. Eng., 70, 53 (1985).CrossRefGoogle Scholar
  4. 4.
    A. S. Chawla, Biomaterials, 2, 83 (1981).CrossRefGoogle Scholar
  5. 5.
    H. Yasuda & M. Gazicki, Biomaterials, 3, 68 (1982).CrossRefGoogle Scholar
  6. 6.
    A. W. Hahn, D. H. York, M. F. Nichols, G. C. Amromin & H. K. Yasuda, J. Appl. Polym. Sci., Appl. Polym. Symp. 38, 55 (1984).Google Scholar
  7. 7.
    A. S. Hoffman, Adv. Polym. Sci., 57, 141 (1984) and references cited therein.CrossRefGoogle Scholar
  8. 8.
    D. Kiaei, A. S. Hoffman, B. D. Ratner, T. A. Horbett & L. O. Reynolds, Polym. Mater. Sci. Eng., 56, 710 (1987).Google Scholar
  9. 9.
    Y.-S. Yen, Y. Iriyama, Y. Matsuzawa, H. Yasuda & S. R. Hanson, Polym. Mater. Sci. Eng., 56, 715 (1987).Google Scholar
  10. 10.
    W. R. Gombotz & A. S. Hoffman, Polym. Mater. Sci. Eng., 56, 720 (1987).Google Scholar
  11. 11.
    H. Yasuda & N. Morosoff in: “Plasma Polymerization,” M. Shen & A. T. Bell, Eds., Amer. Chem. Soc. Symp. Series #108, American Chemical Society, Washington, 1979, p. 277.Google Scholar
  12. 12.
    Y. Matsuzawa & H. Yasuda, J. Appl. Polym. Sci., Appl. Polym. Symp., 38, 65 (1984).Google Scholar
  13. 13.
    A. K. Sharma, Y. Matsuzawa & H. Yasuda, J. Appl. Polym. Sci., Appl. Polym. Symp., 38, 225 (1984).Google Scholar
  14. 14.
    J. Kieser & M. Neusch, Thin Solid Films, 118, 203 (1984).CrossRefGoogle Scholar
  15. 15.
    H. J. Griesser, Vacuum, in press (1988).Google Scholar
  16. 16.
    L. J. Gerenser, J. Adhesion Sci. Tech., 1, 303 (1987).CrossRefGoogle Scholar
  17. 17.
    H. Yasuda, H. C. Marsh, S. Brandt & C. N. Reilly, J. Polym. Sci., Polym. Chem. Ed., 15, 991 (1977).CrossRefGoogle Scholar
  18. 18.
    G. C. S. Collins, A. C. Lowe & D. Nicholas, European Polym. J., 9, 1173 (1973).CrossRefGoogle Scholar
  19. 19.
    H. Yasuda, A. K. Sharma & T. Yasuda, J. Polym. Sci., Polym. Phys. Ed., 19, 1285 (1981).CrossRefGoogle Scholar
  20. 20.
    C. L. Hamermesh & P. J. Dynes, J. Polym. Sci.: Polym. Lett. Ed., 13, 663 (1975).CrossRefGoogle Scholar
  21. 21.
    I. H. Coopes & H. J. Griesser, J. Appl. Polym. Sci., in press (1988).Google Scholar

Copyright information

© Springer Science+Business Media New York 1990

Authors and Affiliations

  • Hans J. Griesser
    • 1
  • Jonathan H. Hodgkin
    • 1
  • Robert Schmidt
    • 1
  1. 1.Division of Chemicals and PolymersCSIROMelbourneAustralia

Personalised recommendations