Introduction

  • Frederick J. Edeskuty
  • Walter F. Stewart
Part of the The International Cryogenics Monograph Series book series (ICMS)

Abstract

Although there might be more than one safe way to design, build, and operate a cryogenic system, the safety of any system depends not only upon the system itself, but also upon its interaction with other systems. Therefore, a knowledge of accepted safety practices and experience with existing systems is invaluable to safe operation either in new or existing cryogenic systems.

Keywords

Design Review Safety Rule Normal Boiling Point Cryogenic System Cryogenic Fluid 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Friend, J. N. (1951). Man and the Chemical Elements, Charles Griffin & Company Ltd., London.Google Scholar
  2. 2.
    Sweaton, W. A. (1955). Jean-François Pilatre de Rozier, the first astronaut, Ann. Sci. 11(4), 349.CrossRefGoogle Scholar
  3. 3.
    Scott, R. B. (1988). Cryogenic Engineering, Met-Chem Research Inc., Boulder, Colorado.Google Scholar
  4. 4.
    Bell, J. H., Jr. (1963). Cryogenic Engineering, Prentice-Hall, Englewood Cliffs, New Jersey.Google Scholar
  5. 5.
    Zabetakis, M. G. (1967). Safety with Cryogenic Fluids, Plenum Press, New York.Google Scholar
  6. 6.
    Mills, R. L., and Edeskuty, F. J. (1983). Cryogens and their properties, in Liquid Cryogens (K. D. Williamson, Jr. and F. J. Edeskuty, eds.), Vol. II, Chap. 1, pp. 1–14, CRC Press, Boca Raton, Florida.Google Scholar
  7. 7.
    Jenkins, A. C. (1961). Summary of physical properties, in Argon, Helium, and the Rare Gases (G. A. Cook, ed.), Chapter X, Interscience Publishers, New York.Google Scholar
  8. 8.
    Gosman, A. L., McCarty, R. D., and Hust, J. G. (1969). Thermodynamic Properties of Argon from the Triple Point to 300 K at Pressures to 1000 Atmospheres, NSRDS-NBS 27, U.S. Department of Commerce, National Bureau of Standards, Boulder, Colorado.Google Scholar
  9. 9.
    Prydz, R., and Straty, G. C. (1973). The Thermodynamic Properties of Compressed Gaseous and Liquid Fluorine, NBS Technical Note 392 (Revised), U.S. Department of Commerce, National Bureau of Standards, Boulder, Colorado.Google Scholar
  10. 10.
    Liley, P. E. (1987). Thermodynamic properties of substances, in Mark’s Standard Handbook for Mechanical Engineers (E. A. Avallone and T. Baumeister III, eds.), 9th Ed., Section 4.2, McGraw-Hill, New York.Google Scholar
  11. 11.
    Weast, R. C., ed. (1986). Handbook of Chemistry and Physics 67th Ed., CRC Press, Boca Raton, Florida, Section C.Google Scholar

Copyright information

© Springer Science+Business Media New York 1996

Authors and Affiliations

  • Frederick J. Edeskuty
    • 1
  • Walter F. Stewart
    • 1
  1. 1.Los Alamos National Laboratory (Retired)Los AlamosUSA

Personalised recommendations