Asphaltenes pp 191-218 | Cite as

Potential of Ultrasonic Generators for Use in Oil Wells and Heavy Crude Oil/Bitumen Transportation Facilities

  • M. R. Islam

Abstract

Crude oils produced in many parts of the world contain asphaltenes. Asphaltenes are known to deposit in the vicinity of production wells during miscible floods, after acid stimulation, during thermodynamic changes, and in the pipe lines during transportation or during pressure changes in a mature field with an asphaltic crude. Asphaltene deposition leads to production loss and involves expensive corrective measures. This study proposes a new technique for cleaning asphaltenes with an ultrasonic device.

Keywords

Ultrasonic Treatment Ultrasonic Irradiation Viscosity Reduction Ultrasonic Generator Bubble Point 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Danesh, A., Krinis, D., Henderson, G. D., and Peden, J.M., 1988. Asphaltene deposition in miscible gas flooding of oil reservoirs. Chem. Eng. Res. Des., 66: 339–344.Google Scholar
  2. 2.
    Yen, T.F., 1972. Present status of the structure of petroleum heavy ends and its significance to various technical applications. Am. Chem. Soc. F., Reprint 17 (4), p. 102–114.Google Scholar
  3. 3.
    Leontaritis, K.J., 1989. Asphaltene deposition: a comprehensive description of problem manifestations and modeling approaches. paper no. SPE 18892.Google Scholar
  4. 4.
    Dubey, S.T., and Waxman, M.H., 1989. Asphaltene adsorption and desorption from mineral surfaces. SPE paper no. 18462.Google Scholar
  5. 5.
    Yen, T.F., 1995. Multiple structural orders of asphaltenes, Asphaltenes and asphalts. I, T.F. Yen and G. V. Chilingarian (eds.), Elsevier, 459 pp.Google Scholar
  6. 6.
    Witherspoon, P.A., Ray, B.R., and Grim, R.E., 1957. A study of the colloidal characteristics of petroleum using an ultracentrifuge. J. Phys. Chem., 61: 1296.Google Scholar
  7. 7.
    Bunger, J.W., 1979. Chemistry of Asphaltenes - Summary of Symposium, Salt Lake City. pp. 1028.Google Scholar
  8. 8.
    Sachanen, A.N., 1945. The Chemical Constituents of Petroleum, Reinhold Publishing Corp., 1945.Google Scholar
  9. 9.
    Schwager, J. and Yen, T. F. 1978. Coal-liquification Products from Major Demonstration Processes, 1. Seaparation and Analysis. Fuel, 57, 100.CrossRefGoogle Scholar
  10. 10.
    Anonymous, 1979. A Basic Asphalt Emulsion Manual. The Asphalt Institute. Manual Series No. 19 (MS-19).Google Scholar
  11. 11.
    Islam, M.R. and Chakma. A., 1989. Compositional dependence of viscosity of bitumens/heavy oils. CIM paper no. 89–40.Google Scholar
  12. 12.
    Islam, M.R., 1994. Role of asphaltenes on oil recovery and mathematical modeling of asphaltene properties., in Asphaltenes and Asphalts, 1, 249–298.CrossRefGoogle Scholar
  13. 13.
    Islam, M.R. and Chakma, A., 1989. Mechanics of bubble flow in heavy oil reservoirs. SPE paper no. 20070.Google Scholar
  14. 14.
    Lian, H. J., Lin, J. R., and T. F. Yen, 1991. Peptization Studies of Asphaltene in Systems and Correlation by Solubility Parameter Spectra. in Particle Technology and Surface Phenomenon in Minerals and Petroleum, Plenum Press, New York.Google Scholar
  15. 15.
    Speight, J. G., 1981. Solvent effects in the Molecular Weights of Petroleum Asphaltenes. Preprints American Chemical Society, Div. Pet. Chem. pp. 25–30.Google Scholar
  16. 16.
    Koots, J. A. and Speight, J. G. 1975. Relation of Petrloleum Resins to Asphaltenes. Fuel 54, pp. 179–84.CrossRefGoogle Scholar
  17. 17.
    Nellensteyn, F. I., 1938. The Colloidal Structure of Bitumens. The Science of Petroleum. A.E. Dunstan (ed.), Oxford U. Press, London, pp. 4, 1938.Google Scholar
  18. 18.
    Lin, J., Lian, H., Chen, J., and Yen, T. F. 1991. Morphological size of asphaltene micelles in asphalt and heavy residue. Particle Technology and Surface Phenomenon in Minerals and Petroleum, Plenum Press, New York.Google Scholar
  19. 19.
    Dwiggins, C.W., Jr., 1978, Study of the colloidal nature of petroleum with an automated Bonse-Hart X-ray small-angle scattering unit, J. Appl. Crystallogr, vol. 11, 615–619.CrossRefGoogle Scholar
  20. 20.
    Dwiggins, C.W., Jr., 1956. A small angle X-ray scattering study of the colloidal nature of petroleum. J. Phys. Chem., vol. 69, 3500–3506.CrossRefGoogle Scholar
  21. 21.
    KIm, H. and Long, R.B., 1977. Characterization of heavy residuum by small-angle X-ray scattering technique. Ind. Eng. Chem. Fundam., vol. 18, 60–63.CrossRefGoogle Scholar
  22. 22.
    Monger, T.G. and Trujillo, D.E., 1988. Organic deposition during CO, and rich-gas flooding. SPE 18063.Google Scholar
  23. 23.
    Kawanaka, S., Park, S.J., and Masoori, G.A., 1988. The role of asphaltene deposition in FOR gas flooding: a predictive technique. SPE/DoE 17376.Google Scholar
  24. 24.
    Fuhr, B.J., Klein. L.L., Komishke, B.D., Reichert, C., and Ridley, R.K., 1989. Effects of diluents and carbon dioxide on asphaltene flocculation in heavy oil solutions. Proc. 4th UNITAR/UNDP Conf. on Heavy Crude and Tar Sands, 2: 637–648.Google Scholar
  25. 25.
    Monger, T.G. and Khakoo, A., 1981. The phase behavior of CO2-Appalachian oil systems. SPE paper no. 10269.Google Scholar
  26. 26.
    Mansoori, G.A. and Jiang, T.S., 1985. Asphaltene deposition and its role in FOR miscible gas flooding. Proc. 3rd European Conf, Rome, Italy.Google Scholar
  27. 27.
    Thayer, R., Nicoll, D.C., and Dick, G., 1989, Asphaltene deposition in production facilities. SPE paper no. 10269.Google Scholar
  28. 28.
    Lcontaritis, K.J. and Mansoori, G.A., 1988. Asphaltene deposition: a survey of field experiences and research approaches. J. Pet. Eng. Sci., 1: 229–239.CrossRefGoogle Scholar
  29. 29.
    Akbar. S.H. and Saleh, A.A., 1988. A comprehensive approach to solve asphaltene deposition problem in some deep wells. SPE paper no. 17965.Google Scholar
  30. 30.
    Hirschberg. A., deJong, L.N.J., Schipper, B.A., and Meijer, J.G., 1984. influence of temperature and pressure on asphaltene flocuulation. Soc. Pet. Eng. J., June, pp. 283.Google Scholar
  31. 31.
    Mansoori, G.A., Jiang, T.S., and Kawanka, S., 1987. Asphaltene deposition and its role in petroleum production and processing. Arabian J. Sci. Eng., vol. 13, no. 1, pp. 17–34.Google Scholar
  32. 32.
    Lcontaritis, K.J., 1988 Asphaltene Deposition: A Thermodynamic-Colloidal Model, Ph.D. Dissertation, University of Illinois, Chicago, USA.Google Scholar
  33. 33.
    Lichaa, P.M., 1977. Asphaltene deposition problem in venezuela crudes–usage of asphaltene emulsion stability oil sands. CIM Special Volume, June, pp. 609–624.Google Scholar
  34. 34.
    Lichaa, P.M. and Herrera, L., 1975. Electrical and other effects related to prevention asphaltene deposition. SPE paper no. 5304.Google Scholar
  35. 35.
    Trbovich, M.G. and King, G.E., 1991. Asphaltene deposition removal: long lasting treatment with a co-solvent. SPE paper no. 21038.Google Scholar
  36. 36.
    Dickakian, Ghaz and Seay, S. 1988. Asphaltene precipitation primary crude exchanger fouling mechanism. Oil and Gas Journal, March 7 pp. 47–50.Google Scholar
  37. 37.
    Hasket. C.E. and Tartera, M. 1965. A practical solution to the problem of asphaltene deposits–Hassi Messaoud Field. Algeria. J. Pet. Tech., April, pp. 387–391.Google Scholar
  38. 38.
    Grosso, J.L., Briceno, M.l., Paterno, J., and Layrisse, I., 1984. Influence of crude oil and surfactant concentration in the rheology and flowing properties of heavy crude oil-in-water emulsions. 5th International Symposium on Surfactants in Solution, Bordeaux, France, July.Google Scholar
  39. 39.
    Layrisse, I., Rivero, M., Paterno, I., Guevara, E., Marin, S., and Gonzalez, J., 1985. Transportation of viscous crude oil-in-water emulsions through pipes. 3rd International Conference of Heavy Crude and Tar Sands, UNITAR, Long Beach, CA, U.S.A., July.Google Scholar
  40. 40.
    Layrisse, I., Rivas, H., Quintero, L., Rivero, M.. and Martinez, A., 1989. Imulsion tecnhonology, the answer for the production, handling and transportation of extra heavy crudes and bitumens. Proc. Fourth UNITAR/UNDP International Conference on Heavy Crude and Tar Sands. vol. 5, 475–489.Google Scholar
  41. 41.
    Hardy, W.A., Sit, S.P., and Stockwell, A., 1989. Field trials of transoil technology for emulsion pipelining of bitumen. Proc. Fourth UNITAR/UNDP International Conference on Heavy Crude and Tar Sands. vol. 5, 490–499.Google Scholar
  42. 42.
    Nunez, G.A. and Rivas, H., 1991. Imulsion, A continuous evolving technology. Fifth Unitar International Conference on Heavy Crude and Tar Sands. vol. 4, 213–220.Google Scholar
  43. 43.
    Guevara, E., Zubillaga, V., Zagustin, K., and Zamora, G., 1991. Core annular flow: Preliminary operational experience and measurements in a 152 mm x 55 km pipeline. Fifth Unitar International Conference on Heavy Crude and Tar Sands. vol. 4, 237–243.Google Scholar
  44. 44.
    Angelidou, C. and Keshavarz, M.J., 1977. The removal of oil particles from water by flotation. Ind. Eng. Chem. Procss Des. Dev., vol 16 (4), 436–441.CrossRefGoogle Scholar
  45. 45.
    Pal, R. and Masliyah, J., 1989. Separation of oil from oil-in-water emulsions by a flotation column. Proc. Fourth UNITAR/UNDPInternational Conference on Heavy Crude and Tar Sands. vol 5, 39–45.Google Scholar
  46. 46.
    Chakma, A., Islam, M.R. and F. Berruti, 1991. Asphaltene - viscosity relationship of processed and unprocessed bitumen. Asphaltene particles in fossil fuel exploration, recovery, refining and production processes. Editor M. K. Sharma, Plenium Publishers, New York, 1994.Google Scholar
  47. 47.
    Chakma, A., Chornet, E., Overend, R., and Dawson, W.H., 1989. Hydrovisbreaking of Athabasca bitumen in high shear jet reactor. paper persented at the AIChE Spring National Meeting, Houston, TX. U.S.A., April.Google Scholar
  48. 48.
    Islam, M.R. and Chakma, A., 1990. Modeling of visbreaking of bitumen in a jet reactor. Chemical Engineering Science. vol. 45, no. 8, 2769–2775.Google Scholar
  49. 49.
    Chakma, A. and Berruti, F. 1991. Ultrasonic visbreaking of athabasca bitumen. Heavy crude and sand tars. Proc. of the 5th UNITAR International Conference on heavy Crude and Tar Sands, Vol. 4, 101–104.Google Scholar
  50. 50.
    Price, G.J., 1992. Introduction to sonochemistry. Current Trends in Sonochemistry, G.J. Price (ed.), Royal Soc. Chem., 2–7.Google Scholar
  51. 51.
    Boudjouk, P., 1992. Organometallic processes promoted by ultrasound. Current Trends in Sonochemistry, G.J. Price (ed.), Royal Soc. Chem., 110–122.Google Scholar
  52. 52.
    Luche, J.L., 1992. New orientations in Sonochemistry. Current Trends in Sonochemistry, G.J. Price (ed.), Royal Soc. Chem., 34–49.Google Scholar
  53. 53.
    Mason, T.J., 1991. Practical Sonochemistry A users guide to applications in chemistry and chemical engineeringEllis Horwood, Chichester.Google Scholar
  54. 54.
    Malhotra, S.L., 1982. Ultrasonic degradation of hydroxypropyl cellulose solutions in water, ethanol, and tetrahydrofuran. J Macromol. Sci.-Chem., vol. A17 (4), 601–636.CrossRefGoogle Scholar
  55. 55.
    Kuo, J.F., Sadeghi, K., Jang, L.K., Sadeghi, M.A., and Yen, T.F., 1986. Enhancement of bitumen separation from tar sand by radicals in ultrasonic irradiation. Applied Phys. Comm., vol. 6, 205–212.Google Scholar
  56. 56.
    Lee, A.S., Xu, X.W., and Yen, T.F., 1989. Upgrading of heavy crude at low-temperature and ambient atmosphere. Proc. Fourth UNITAR/UNDPInternational Conference on Heavy Crude and Tar Sands, vol. 5, 109–116.Google Scholar
  57. 57.
    Frederick, J.R., 1965. Ultrasonic engineering. Wiley, New York, p. 117.Google Scholar
  58. 58.
    Smordal, K. and Islam, M.R., 1993. Numerical simulation of a novel technique for upgrading heavy residuum. Fine Particle Society Annual Conference, Chicago, IL. July.Google Scholar
  59. 59.
    Gollapudi, U.K., Bang, S.S. Islam, M.R., “Use of Ultrasonic Treatment for Removal of Asphaltene Deposits During Petroleum Production”, Proc. SPE 1994 Conf Prod.. New Orleans, Louisiana.Google Scholar
  60. 60.
    Schmid, G. and Rommel, 0., 1939. Z. Electrochem., vol. 45, 649.Google Scholar
  61. 61.
    Ono, S., 1940. Rev Phys. Chem. Japan, vol. 14, 25.Google Scholar
  62. 62.
    Brett, H.W.W. and Jellinek, H.H.G., 1956. Degradation of long-chain molecules by ultrasonic waves. Part VI. Effect of pressure. J. Polymer Science, vol. XXI, 535–545.CrossRefGoogle Scholar
  63. 63.
    Zhong, L. and Islam, M.R., 1995. Asphaltene propagation in porous media and capillary tubes. manuscript in preparation.Google Scholar
  64. 64.
    Mason, T.J. and Berlan, J., 1992. Ultrasound in industrial processes: the problems of scale-up. Current Trends in Sonochemistry, G.J. Price (ed.), 148–157.Google Scholar
  65. 65.
    Mason, T.J. and Lorimer, J.P., 1989. Sonochemistry, Theory, Applications and Uses of Ultrasound in Chemistry, Ellis Horwood.Google Scholar
  66. 66.
    Islam, M.R. and Farouq Ali, S.M., 1990. New scaling criteria for chemical flooding experiments. J. Canadian Petroleum Technology, vol. 29 (1), 29–36.Google Scholar
  67. 67.
    Cum, G., Gallo, R., Spadaro, A., and Galli, G., J. Chem. Soc. Perkins Trans II, 376.Google Scholar
  68. 68.
    de Sousa-Barboza, J.C. Petrier, J.L., and Reverdy, G., 1988. J. Org . Chem., vol. 53, 1212.Google Scholar
  69. 69.
    Petrier, C., Jeunet, A., Luche, J.L., and Reverdy, G., 1992. J. Amer Soc.,114.Google Scholar
  70. 70.
    Kim, S. T., Boudh-Hir, M. E. and Mansoori, G. A. 1990. The role of asphaltenes in wettability reversal. Annual Technical Conference and Exhibition, SPE paper no. 20700.Google Scholar
  71. 71.
    Crocker, M. E. and Marchin, L. M. 1988. Wettability and adsorption characteristics of crude-oil asphaltene and polar fractions. Journal of Petroleum Technology, April, pp. 470–474.Google Scholar
  72. 72.
    Reddi, L. N., Berliner III, S. and Lee, K. Y. 1993. Feasibility of ultrasonic enhancement of flow in clayey sands. Journal of Environmental Engineering. Vol.119, No. 4, July/August, 1993.Google Scholar
  73. 73.
    Venkitaraman, A., Roberts, P.M., and Sharma, M.M., 1994. Ultrasonic removal of near-wellbore damage caused by fines and mud solids, SPE paper no. 27388.Google Scholar

Copyright information

© Springer Science+Business Media New York 1995

Authors and Affiliations

  • M. R. Islam
    • 1
  1. 1.Department of Geological EngineeringSouth Dakota School of Mines and TechnologyRapid CityUSA

Personalised recommendations