Development of Ag-Sheathed Bi2223 Superconducting Wires and Their Applications

  • K. Hayashi
  • K. Sato
  • K. Ohkura
  • N. Shibuta
  • K. Ohmatsu
  • T. Kaneko
  • T. Sashida
  • M. Ueyama
  • J. Fujikami
  • M. Ito
  • S. Kobayashi
  • N. Saga
  • S. Hahakura
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 44)

Abstract

Silver-sheathed multifilamentary BiPbSrCaCuO 2223 superconducting wires with long length and high Jc of over 104A/cm2 (77.3K, OT) were developed by using the powderin-tube method. A scaling law, which can be adopted in a wide temperature and magnetic field range, was found. Using this scaling law, we can estimate Je at any temperature and magnetic field by using the wire performance at 77K without external field. Low AC loss wires and high strength wires were also developed for future applications. High electrical resistivity of the matrix and the use of twisted filaments are effective for reducing the AC losses. Good stress and strain tolerant characteristics were obtained for silver alloy sheathed wires. As a result of the progress in wire technology, we were able to fabricate many application prototypes. In high amperage conductor applications, current leads, bus bars and cable conductors were developed. In magnet applications, pancake magnets cooled by a GM refrigerator and solid nitrogen, as well as a layer wound magnet for high magnetic field NMR application at 4.2K, were developed.

Keywords

Magnetic Field Range Electric Power Company Bi2223 Superconductor Solid Nitrogen Cable Conductor 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    S.Kobayashi, T.Kaneko, T.Kato, J.Fujikami and K.Sato: Physica C 258, 336, (1996)CrossRefADSGoogle Scholar
  2. 2.
    M.Iwakuma, K.Funaki, M.Takeo, K.Yamafuji, M.Konno, Y.Kasagawa, K.Ohkubo, I.Itoh, S.Nose: Proceedings ofICEC16/ICMC, 1325, (1997)Google Scholar
  3. 3.
    K.Funaki, M.Iwakuma, M.Takeo, K.Yamafuji, J.Suehiro, M.Hara, M.Konno, Y.Kasagawa, 1.Itoh, S.Nose, M.Ueyama, K.Hayashi and K.Sato: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, VOL.7, NO. 2, 824, (1997)Google Scholar
  4. 4.
    K.Ohmatsu, K.Ohkura, M.Ueyama, T.Kato, K.Hayashi and K.Sato: Proceedings of the 10th US-Japan Workshop on HIGH-FIELD SUPERCONDUCTING MATERIALS and Standard, 27, (1997)Google Scholar
  5. 5.
    T.Kato, K.Sato, T.Masuda, T.Shibata, Y.Hosoda, S.Isojima, S.Terai, T.Kishida and E.Haraguchi: Advances in Superconductivity VI, 1273, (1994)Google Scholar
  6. 6.
    T.Kato, K.Sato, S.Terai, T.Koike, T.Kishida and E.Haraguchi,: Advances in Superconductivity d[,1223,Google Scholar
  7. 7.
    T.Kato, K.Hayashi, K.Sato, M.Kurihara and E.Suzuki: to be published in Proceedings of ISS’96 Google Scholar
  8. 8.
    T.Kato, K.Hayashi, K.Sato, Y.Yaegashi, M.Nagano, T.Ando, T.Isono and H.Tsuji: to be published in Proceedings of ISS’96 Google Scholar
  9. 9.
    K.Sato, K.Hayashi, K.Ohmatsu, J.Fujikami, N,Saga, T.Shibata, S.Isojima, S.Honjo, H.Ishii, T.Hara and Y.Iwata: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, VOL.7, NO. 2, 345, (1997)Google Scholar
  10. 10.
    K.Ohkura, M.Ueyama, K.Hayashi and K.Sato: to be published in Proceedings of ISS’96 Google Scholar
  11. 11.
    J.Iannicelli, J.Pechin, M.Ueyama, K.Ohkura, K.Hayashi, K.Sato, A.Lauder and C.Rey: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, VOL.7, NO. 2, 1061, (1997)Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • K. Hayashi
    • 1
  • K. Sato
    • 1
  • K. Ohkura
    • 1
  • N. Shibuta
    • 1
  • K. Ohmatsu
    • 1
  • T. Kaneko
    • 1
  • T. Sashida
    • 1
  • M. Ueyama
    • 1
  • J. Fujikami
    • 1
  • M. Ito
    • 1
  • S. Kobayashi
    • 1
  • N. Saga
    • 1
  • S. Hahakura
    • 1
  1. 1.Sumitomo Electric Industries, LTD.Osaka, 554Japan

Personalised recommendations