Analysis of Mechanical Rigidity Simulates Superconducting Coil Pack at Low Temperature

  • Hitoshi Tamura
  • Yuji Takagi
  • Yasuhide Shindo
  • Arata Nishimura
  • Toshiyuki Mito
  • Junya Yamamoto
  • Osamu Motojima
  • LHD group
Part of the An International Cryogenic Materials Conference Publication book series (ACRE, volume 40)

Abstract

The helical coil in the Large Helical Device (LHD) is subject to high electromagnetic force above 10 MN/m. The large deformations and high stress fields of the coils cause the instabilities of the superconducting and influence to the plasma confinement due to the deformation of the device. Coils must have enough rigidity to bear this electromagnetic force. To investigate the rigidity of the helical coils, finite element method and mixture law were applied to calculate apparent rigidity of coil pack that simulated the section of actual helical coil. Elastic modulus of insulator were varied in calculation and representative results showed good agreements with the results of the experiments1.

Keywords

Compressive Load Electromagnetic Force Copper Sample Helical Coil Exposure Ratio 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    O. Motojima, et al., Physics and engineering design studies on the Large Helical Device, Fusion Eng. and Design 20: 3–14 (1993)CrossRefGoogle Scholar
  2. 2.
    J. Yamamoto, T. Mito, O. Motojima, K. Tanahashi, N. Yanagi, S. Yamada, A. Nishimura, M. Sakamoto, H. Tamura, S. Imagawa, S. Satoh, T. Satow, M. Takeo, M. Fujiwara and A. IIyoshi, Research and development of superconductors and superconducting coils for the Large Helical Device, Fusion Eng. and Design 20: 139–146 (1993)CrossRefGoogle Scholar
  3. 3.
    A. Nishimura, H. Tamura, T. Mito, K. Takahata, N. Yanagi,, M. Sakamoto, S. Yamada and J. Yamamoto, Cryogenic compressive deformation properties of superconducting coil packs simulated for helical coils on the LHD program, Cryogenics 32: 376–379 (1993)Google Scholar
  4. 4.
    A. Nishimura, H. Tamura, T. Mito, K. Takahata, N. Yanagi,, M. Sakamoto, S. Yamada, J. Yamamoto and O. Motojima, Rigidity test of a superconducting coil pack at 4.2 K simulated for the helical coil on the LHD program.Google Scholar
  5. 5.
    T. Mito, J. Yamamoto, K. Takahata, N. Yanagi, S. Yamada, E. Tada, S. Kashihara, K. Shinkai, H. Yamamura and M. Taneda, Development of Superconducting conductors for Large Helical Device, IEEE Tran. Magnetics 27: 2224–2231 (1991)CrossRefGoogle Scholar
  6. 6.
    R. M. Jones, Mechanics of Composite Materials, McGraw—Hill, NY (1975)Google Scholar
  7. 7.
    Y. Takagi, Y. Shindo, M. Ito, K. Hayashi, H. Tamura, A. Nishimura and J. Yamamoto, Mechanical behavior and compressive rigidity of superconducting coil pack for Large Helical Device, JSME preprint No. 931–1: 117–119 (1993)Google Scholar

Copyright information

© Springer Science+Business Media New York 1994

Authors and Affiliations

  • Hitoshi Tamura
    • 1
  • Yuji Takagi
    • 2
  • Yasuhide Shindo
    • 2
  • Arata Nishimura
    • 1
  • Toshiyuki Mito
    • 1
  • Junya Yamamoto
    • 1
  • Osamu Motojima
    • 1
  • LHD group
  1. 1.National Institute for Fusion ScienceFurocho, Chikusa, NagoyaJapan
  2. 2.Tohoku UniversityAoba, Aramaki, Aoba Sendai, 980Japan

Personalised recommendations