Stability Estimate for CICC with Cooling Channel Using One- and Two-Fluid Codes

  • S. De Palo
  • C. Marinucci
  • R. Zanino
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)

Abstract

Cable-In-Conduit Conductors (CICC) with central cooling channel have been recently tested in the QUench Experiment on Long Length (QUELL) at the Sultan facility, and are foreseen for the Toroidal Field (TF) and the Central Solenoid (CS) superconducting magnets of ITER (International Thermonuclear Experimental Reactor). A careful thermal-hydraulic analysis of this type of cables is needed in the design of magnets with a reasonable safety margin.

To the purpose of a more accurate description of the physics in the 2-channel topology, the 2-fluid code Mithrandir1 was recently developed from the 1-fluid code Gandalf.2 Mithrandir allows different thermodynamic state of the helium that flows in the cable bundle region and of the helium in the central channel. On the contrary, the homogenization intrinsic in a 1-fluid model can result, among others, in a significant overestimation of the stability margin.

Both Gandalf and Mithrandir have been very recently benchmarked against quench propagation data from QUELL. Here, we analyze the stability of QUELL, and a first comparison with experimental stability data for this type of conductor is presented, using a few measurements performed on QUELL.

Some stability calculations for an ITER CS conductor are then performed with the Mithrandir code, considering the influence of the 2-fluid coupling on the stability margin.

Keywords

Heat Transfer Coefficient Stability Margin Cool Channel Toroidal Field International Thermonuclear Experimental Reactor 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    R. Zanino, S. DePalo, and L. Bottura, A two-fluid code for the thermohydraulic transient analysis of CICC superconducting magnets, J. Fus. Energy 14:25 (1995).CrossRefGoogle Scholar
  2. 2.
    L. Bottura, A numerical model for the simulation of quench in the ITER magnets, J. Comput. Phys. 125:26(1996).CrossRefGoogle Scholar
  3. 3.
    M. Shimada and N. Mitchell, Stability estimations and quench simulations for the ITER conductors, J. Fus. Energy 14:59 (1995).CrossRefGoogle Scholar
  4. 4.
    A. Anghel, et al., The Quench Experiment on Long Length QUELL — Final Report, EPFL-CRPP, JAERI, MIT-PFC and SINTEZ-NIIEFA Report (1997).Google Scholar
  5. 5.
    R. Zanino, L. Bottura, and C. Marinucci, A comparison between 1- and 2-fluid simulations of the QUELL conductor, IEEE Trans. Appl. Supercond. 7:493 (1997).CrossRefGoogle Scholar
  6. 6.
    C. Marinucci, L. Bottura, G. Vecsey, and R. Zanino, The QUELL experiment as a validation tool for the numerical code Gandalf, submitted to Cryogenics (1997).Google Scholar
  7. 7.
    R. Zanino, L. Bottura and C. Marinucci, Computer simulation of quench propagation in QUELL, submitted to Adv. Cryo. Eng. (1997).Google Scholar
  8. 8.
    N. Koizumi, Y. Takahashi and H. Tsuji, Numerical model using an implicit finite difference algorithm for stability simulation of a cable-in-conduit superconductor, Cryogenics 36:649 (1996).CrossRefGoogle Scholar
  9. 9.
    N. Mitchell, Private communication (1995).Google Scholar
  10. 10.
    ITER-DDD, Ch. 1 “Magnet Systems”, Appendix C/ Annex II “Conductor database”.Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • S. De Palo
    • 1
  • C. Marinucci
    • 2
  • R. Zanino
    • 1
  1. 1.Dipartimento di Energetica, PolitecnicoTorinoItaly
  2. 2.CRPP-Fusion Technology Div.EPFLVilligen PSISwitzerland

Personalised recommendations