Oscillating Flow Behavior in a Pulse Tube Refrigerator under Optimized Conditions

  • M. Shiraishi
  • K. Seo
  • N. Nakamura
  • M. Murakami
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)

Abstract

Optimum conditions, which are for the lowest value of minimum cold end temperatures, are investigated by changing the frequency and the opening of the orifice and double inlet valves. Moreover, oscillations of velocity are obtained directly by using a hot-wire anemometer and the P-V work in the pulse tube is estimated. The velocity oscillation under the optimum conditions and the effects of valve opening on the P-V work are discussed. It is found that for the orifice configuration the P-V work increases with increasing valve opening and reaches a maximum value at a valve opening larger than that for the optimum condition. For the double inlet configuration the dependency of the P-V work on the valve opening is negligibly small except in the range of very small opening. It is suggested from the results of P-V work that the losses in the pulse tube have significant effects in the range of large valve opening.

Keywords

Valve Opening Fluid Element Basic Configuration Velocity Oscillation Pulse Tube 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    W.E. Gifford and R.C. Longsworth, Pulse Tube Refrigeration progress, Advances in Cryogenic Engineering, Plenum Press, New York, 10B (1965) p. 69.Google Scholar
  2. 2.
    E.L. Mikulin, A.A. Trasov and M.P. Shkerbyonock, Low-Temperature Expansion Pulse Tubes, Advances in Cryogenic Engineering, Plenum Press, New York, 29 (1984) p. 629.CrossRefGoogle Scholar
  3. 3.
    R. Radebaugh, J. Zimmerman, D.R. Smith and B. Louie, A Comparison of Three Types of Pulse Tube Refrigerators : New Methods for Reaching 60 K, Advances in Cryogenic Engineering, Plenum Press, New York, 31 (1986) p. 779.Google Scholar
  4. 4.
    S. Zhu, P. Wu, Z. Chen, W. Zhu, and Y. Zhou, A Single Stage Double Inlet Pulse Tube Refrigerator Capable of Reaching 42 K, Cryogenics, 30 (1990) p. 257.CrossRefGoogle Scholar
  5. 5.
    R. Radebaugh, A Review of Pulse Tube Refrigerator, Advances in Cryogenic Engineering, Plenum Press, New York, 35 (1990) p. 1191.Google Scholar
  6. 6.
    J.L. Gao and Y. Matsubara, Experimental Investigation of 4 K Pulse Tube Refrigerator, Cryogenics, 34 (1994) p. 25.CrossRefGoogle Scholar
  7. 7.
    P.J. Storch, R. Radebaugh and J. Zimmerman, Analytical model for the refrigeration power of the orifice pulse tube refrigerator, NIST Technical Notes 1343(1990).Google Scholar
  8. 8.
    A. Tominaga, Thermodynamic aspects of thermoacoustic theory, Cryogenics, 35, (1995), p. 427.CrossRefGoogle Scholar
  9. 9.
    P. Kittel, A. Kashani, J. M. Lee and P.R. Roach, General pulse tube theory, Cryogenics, 36, (1996), p. 849.CrossRefGoogle Scholar
  10. 10.
    M. Shiraishi, K. Seo and M. Murakami, Pressure and temperature oscillations of working gas in a pulse tube refrigerator, Cryocooler 8, Plenum Press, New York (1995), p. 403.Google Scholar
  11. 11.
    J. Liang, A. Ravex and P. Rolland, Study on pulse tube refrigeration, Part3: Experimental verification, Cryogenics, 36, (1996), p. 101.CrossRefGoogle Scholar
  12. 12.
    W. Rawlins, R. Ragebaugh and K.D. Timmerhaus, Thermal anemometry for mass flow measurement in oscillating cryogenic gas flows, Rev. Sci. Instrum. 64 (1993), p. 3229.CrossRefGoogle Scholar
  13. 13.
    K. Seo, M. Shiraishi, N. Nakamura and M. Masahide, Radial temperature and velocity profiles of oscillating flows in a pulse tube refrigerator, Proc. of the 16th ICEC/ICMC, Elsevier Science, Oxford (1997), p. 251.Google Scholar
  14. 14.
    K. Seo, M. Shiraishi and M. Murakami, Temperature oscillations of working gas inside a basic, an orifice and double inlet pulse tube refrigerators, Advances in Cryogenic Engineering, Plenum Press, New York, 41 (1996) p. 1395.Google Scholar
  15. 15.
    J.M. Lee, P. Kittel, K.D. Timmerhaus and R. Radebaugh, Steady Secondary Momentum and Enthalpy Streaming in the Pulse Tube Refrigerator, Cryocooler 8, Plenum Press, New York, (1995), p. 359.Google Scholar
  16. 16.
    E.S. Jeong, Secondary Flow in Basic Pulse Tube Refrigerators, Cryogenics, 36, (1996), p.317.CrossRefGoogle Scholar
  17. 17.
    S.A. Colgate, Regenerator optimization for Stirling cycle refrigeration II, Cryocooler 8, Plenum Press, New York, (1995), p. 247.Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • M. Shiraishi
    • 1
  • K. Seo
    • 2
  • N. Nakamura
    • 2
  • M. Murakami
    • 2
  1. 1.Mechanical Engineering LaboratoryMITITsukuba, Ibaraki, 305Japan
  2. 2.Institute of Engineering MechanicsUniversity of TsukubaTsukuba, Ibaraki, 305Japan

Personalised recommendations