A Method to Buffer AC Losses in a Forced Flow Superconducting Magnet

  • B. K. Parsons
  • C. A. Luongo
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 43)

Abstract

A SMES device is proposed for an application requiring repeated charging and discharging over a short period of time, followed by a long period of relatively low usage (standby). The magnet consists of a toroid wound with a cable-in-conduit conductor (CICC) cooled by forced flow supercritical helium, each coil module containing a limited helium inventory. The hypothetical operating scenario results in high energy deposition due to AC losses into the SMES magnet over the short (less than one hour) operating period on an approximately daily cycle. Removing this energy deposition in real time would require a refrigeration system of extraordinary size. To reduce the size of the necessary cooling system, while maintaining operability in the postulated scenario, the supercritical circuit includes a large separate helium inventory to buffer the AC loss energy deposited during the discharge cycle. A methodology is described to establish the required supercritical inventory for magnet pulsed operation, and to compare the present approach with steady-state removal of AC loss loads.

Keywords

Heat Load Storage Volume Refrigeration System Operating Scenario Pulse Operation 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    M. A. Green, R. A. Byrns, S. J. St. Lorant, Estimating the cost of superconducting magnets and the refrigerators needed to keep them cold, “Advances in Cryogenic Engineering”, Plenum Press, New York (1991), Vol. 37A, p. 637.Google Scholar
  2. 2.
    D. Slack, A novel scheme to handle highly pulsed loads with a standard helium refrigerator, “Advances in Cryogenic Engineering”, Plenum Press, New York (1994), Vol. 39, p. 1223.Google Scholar

Copyright information

© Springer Science+Business Media New York 1998

Authors and Affiliations

  • B. K. Parsons
    • 1
  • C. A. Luongo
    • 1
  1. 1.Bechtel National, Inc.San FranciscoUSA

Personalised recommendations