Solidification in the Presence of a Third Phase

  • Doru Michael Stefanescu

Abstract

In the mathematical treatment of microstructure evolution presented so far, only two phases were considered, solid and liquid. However, casting alloys often exhibit inclusions that degrade their mechanical properties. The solid, liquid or gaseous inclusions, that constitute a third phase, can considerably affect solidification morphology. In turn, solidification conditions influence the size and distributions of these inclusions. This chapter will describe two of the most significant phenomena related to the interaction between inclusions and the solidification front, interaction of solid particles with the S/L interface and micro-shrinkage formation.

Keywords

Critical Velocity Interface Force Solidification Velocity Thermal Conductivity Ratio Dendrite Coherency 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Argo D. and J. Gruzleski, 1988, AFS Trans. 96: 65Google Scholar
  2. Asthana R. and S.N. Tewari, 1993, JMater. Sci. 28: 5414CrossRefGoogle Scholar
  3. Berry J.T., 1995, AFS Trans. 103: 837Google Scholar
  4. Bishop H.F., E.T. Myskowski, and W.S. Pellini, 1955, AFS Trans. 63: 271Google Scholar
  5. Bolling G.F. and J. Cissé. 1971, J. Crystal Growth 10: 56CrossRefGoogle Scholar
  6. Bounds S.M., G.J. Moran, K.A. Pericleous and M. Cross, 1998, in: Modeling of Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas and C. Beckenmann, eds., TMS, Warrendale, PA p. 857Google Scholar
  7. Caine J.B., 1950, AFS Trans. 58: 261Google Scholar
  8. Catalina A.V. and D.M. Stefanescu, 1999, in: Proc. of Modeling of Casting and Solidification Processes IV,CP. Hong, J.K Choi and D.H. Kim eds., Seoul p:3Google Scholar
  9. Catalina A.V. and D.M. Stefanescu, 1999a, in Solidification 99,W.H. Hofmeister, J.R. Rogers, N.B. Singh, S.P. Marsh and P.W. Vorhees, TMS, Warrendale, PA p:273Google Scholar
  10. Catalina A.V., S. Mukherjee, and D.M. Stefanescu, 2000, Metall. and Mater. Trans. 31A: 2559CrossRefGoogle Scholar
  11. Chernov A.A., D.E. Temkin, and A.M. Mel’nikova, 1976, Soy. Phys. Crystallogr. 21: 369Google Scholar
  12. Chernov A.A., D.E. Temkin, and A.M. Mel’nikova, 1977, Soy. Phys. Crystallogr. 22: 656Google Scholar
  13. Chiesa F., M. Mammen and L.E. Smiley, 1998, AFS Trans. 106: 149Google Scholar
  14. Chiesa F. and J. Mammen, 1999, AFS Trans. 107: 103Google Scholar
  15. Dutta B. and M.K. Surappa, 1998, Metall. and Mater. Trans. 29A: 1319CrossRefGoogle Scholar
  16. Endo A., H.S. Chauhan, T. Egi, Y. Shiohara, 1996, J. Mater. Res. 11: 795CrossRefGoogle Scholar
  17. Fasoyinu Y. and C.E. Schvezov, 1990, in: Proceedings F. Weinberg Intl. Symposium on Solidification Processing, Ontario, Pergamon Press p. 243Google Scholar
  18. Frenkel J., 1955, Kinetic Theory of Liquids,Dover Pub. p.324Google Scholar
  19. Fuoco R., H. Goldenstein, and J.E. Gruzleski, 1994, AFS Trans. 102: 297.Google Scholar
  20. Ganesan S. and D.R. Poirier, 1990, Met. Trans. 21B: 173CrossRefGoogle Scholar
  21. Hadji L., 1999, in: Solidification 99, W.H. Hofmeister, J.R. Rogers, N.B. Singh, S.P. Marsh and P.W. Vorhees, TMS, Warrendale, PA p. 263Google Scholar
  22. Hadji L., 1999a, Phys. Rev. E 60: 6180CrossRefGoogle Scholar
  23. Han Q. and J.D. Hunt, 1995, ISIJ International. 35: 693CrossRefGoogle Scholar
  24. Hansen P.N. and P.R. Sahm, 1988, in: Modeling of Casting and Welding Processes IV, A.F. Giamei and G.J. Abbaschian, eds., TMS, Warrendale, PA p. 33.Google Scholar
  25. Hecht U. and S. Rex, 1997, Met. Trans. 28A: 867Google Scholar
  26. Hecht U., and S. Rex, 2001, in: The Science of Casting and Solidification, D. M. Stefanescu, R. Ruxanda, M. Tierean, and C. Serban eds., Editura Lux Libris, Brasov, Romania p. 53Google Scholar
  27. Huang H., V.K. Suri, N. El-Kaddah and J.T. Berry, 1993, in: Modeling of Casting, Welding and Advanced Solidification Processes VI, T.S. Piwonka, V. Voller and L. Katgerman, eds., TMS, Warrendale, PA p. 219Google Scholar
  28. Juretzko F.R, B.K. Dhindaw, D.M. Stefanescu, S. Sen, and P. Curreri, 1998, Metall. and Mater. Trans. 29A: 1691CrossRefGoogle Scholar
  29. Kennedy D.O., 1991, Advanced Mater. amp; Proc. 6: 42Google Scholar
  30. Kennedy A.R. and T.W. Clyne, 1991, Cast Metal 4,3:160Google Scholar
  31. Kim J.K. and P.K. Rohatgi, 1998, Metall. and Mater. Trans. 29A: 351CrossRefGoogle Scholar
  32. Körber C., G. Rau, M.D. Cosman, and E.G. Cravalho, 1985,1 Crystal Growth 72: 649Google Scholar
  33. Kubo K. and R.D. Pehlke, 1985, Met. Trans. 16B: 359CrossRefGoogle Scholar
  34. LaOrchan W. and J.E. Gruzleski, 1992, AFS Trans. 100: 415Google Scholar
  35. Langebin D., 1981, in: Intermolecular Forces, B. Pullman ed., Reidel, Dordrecht p. 547Google Scholar
  36. Laurent V. and C. Rigaut, 1992, AFS Trans. 100:399 Google Scholar
  37. Lawrynowicz D.E., B. Li and J. Lavernia, 1997, Met. Trans. 28B: 877CrossRefGoogle Scholar
  38. Leal L.G., 1992, Laminar Flow and Convective Transport Processes: Scaling Principles and Asymptotic Analysis,Butterworth-HeinemannGoogle Scholar
  39. Lee Y.W., E. Chang and C.F. Chieu, 1990, Met. Trans. B, 21B: 715CrossRefGoogle Scholar
  40. Lei C.S., E.W. Lee and W.E. Frazier, 1998, in: Advances in Aluminum Casting Technology, M. Tiryakioglu and J.Campbell, eds., ASM, Materials Park, OH p. 113Google Scholar
  41. Major J.F., 1997, AFS Trans. 105: 901Google Scholar
  42. Mukherjee S. and D.M. Stefanescu, 2000, in: State of the Art in Cast MMCs,P.K. Rohatgi ed., TMS (The Minerals, Metals amp; Materials Society) p:89Google Scholar
  43. Mohanty P.S., F.H. Samuel and J.E. Gruzleski, 1995, AFS Trans. 103: 555Google Scholar
  44. Niyama E. T. Uchida, M. Morikawa and S. Saito, 1982, AFS Cast Metals Research J 7: 52Google Scholar
  45. Ode M., J.S. Lee, S. G. Kim, W.T. Kim, and T. Suzuki, 2000, ISIJ International 40: 153CrossRefGoogle Scholar
  46. Omenyi S.N. and A.W. Neumann, 1976, J Applied Physics 47: 3956CrossRefGoogle Scholar
  47. Pang H., D.M. Stefanescu and B.K. Dhindaw, 1993, in: Proceedings of the 2nd International Conference on Cast Metal Matrix Composites,D. M. Stefanescu and S. Sen editors, American Foundrymen’s Soc. p:57Google Scholar
  48. Piwonka T.S. and M.C. Flemings, 1966, Trans. AIME 236: 1157Google Scholar
  49. Piwonka T.S., 2000, in: Proceedings of the Merton C. Flemings Symposium on Solidification and Materials Processing, R. Abbaschian, H. Brody, and A. Mortensen eds., TMS, Warrendale Pa. p. 363Google Scholar
  50. Poirier D.R., 1998, in: Modeling of Casting, Welding and Advanced Solidification Processes VII, B.G. Thomas and C. Beckermann, eds., TMS, Warrendale, PA p. 837.Google Scholar
  51. Poirier. R., K. Yeum and A.L. Maples, 1987, Met. Trans. 18A: 1979CrossRefGoogle Scholar
  52. Pötschke J. and V. Rogge, 1989, J Crystal Growth 94: 726CrossRefGoogle Scholar
  53. Premkumar M.K., M. G. Chu, 1993, Met. Trans. 24A: 2358Google Scholar
  54. Rempel A.W. and M.G. Worster, 2001,1 Crystal Growth 223:420Google Scholar
  55. Rooy E.L., 1993, AFS’ Trans. 101: 961Google Scholar
  56. Roy N., A.M. Samuel and F.H. Samuel, 1996, Met. Mater. Trans. 27A: 415CrossRefGoogle Scholar
  57. Rubinow S.I. and J. B. Keller, 1961, J Fluid Mechanics. 11: 447CrossRefGoogle Scholar
  58. Saffman P.G., 1965, J Fluid Mechanics. 22: 385CrossRefGoogle Scholar
  59. Samuel A.M. and F.H. Samuel, 1999, Met. Mater. Trans. 26A: 2359CrossRefGoogle Scholar
  60. Sasikumar R., T.R. Ramamohan and B.C. Pai, 1989, Acta Metall. 37: 2085CrossRefGoogle Scholar
  61. Sasikumar R. and T.R. Ramamohan, 1991, Acta Metall. 39: 517CrossRefGoogle Scholar
  62. Sekhar J.A. and R. Trivedi, 1990, in: Solidification of Metal Matrix Composites,P. Rohatgi, ed., TMS, Warrendale, PA p:39Google Scholar
  63. Sen S., B.K. Dhindaw, D.M. Stefanescu, A. Catalina and P.A. Curreri, 1997, J. Crystal Growth 173: 574CrossRefGoogle Scholar
  64. Sen S., W.F. Kaukler, P. Curreri, and D.M. Stefanescu, 1997a, Metall. and Mater. Trans 28A: 2129CrossRefGoogle Scholar
  65. Shangguan D.K., S. Ahuja, D.M. Stefanescu, 1992, Metall. Trans. 23A: 669CrossRefGoogle Scholar
  66. Shaw D.J., 1980, Introduction to Colloid and Surface Chemistry, ButterworthsGoogle Scholar
  67. Shibata H., H. Yin, S. Yoshinaga, T. Emi and M. Suzuki, 1998, ISIJInt. 38: 149CrossRefGoogle Scholar
  68. Shiohara Y., A. Endo, Y. Watanabe, H. Nomoto, and T. Umeda, 1997, in: Solidification Processing 97, J. Beech and H. Jones, eds., Univ. of Sheffield, UK p. 456Google Scholar
  69. Shivkumar S., D. Apelian and J. Zou, 1990, AFS Trans. 98: 897Google Scholar
  70. Sigworth G.K. and C. Wang, 1993, Met. Trans. 24B: 365CrossRefGoogle Scholar
  71. Skallerud B., T. Iveland and G. Harkegard, 1993, Eng. Fract. Mech. 44: 857CrossRefGoogle Scholar
  72. Spittle J.A., M. Almeshhedani and S.G.R. Brown, 1995, Cast Metals 7: 51Google Scholar
  73. Stefanescu D.M., B.K. Dhindaw, S.A. Kacar, and A. Moitra, 1988, Met. Trans. 19A: 2847CrossRefGoogle Scholar
  74. Stefanescu D.M., R.V. Phalnikar, H. Pang, S. Ahuja and B.K. Dhindaw, 1995, ISIJ International 35: 700CrossRefGoogle Scholar
  75. Stefanescu D.M., F.R Juretzko, B.K. Dhindaw, A. Catalina, S. Sen, and P.A. Curreri, 1998, Metall. and Mater. Trans. 29A: 1697CrossRefGoogle Scholar
  76. Stefanescu D.M. and A.V. Catalina, 1998, ISIJ International 38: 503CrossRefGoogle Scholar
  77. Stefanescu D.M., A.V.Catalina, F.R. Juretzko, S. Mukheijee, S. Sen and B.K. Dhindaw, 2000, in: Microgravity Research and Applications in Physical Sciences and Biotechnology,SP-454 vol. 1 Sorrento, European Space Agency p.621Google Scholar
  78. Surappa M.K. and P.K. Rohatgi, 1981, J. Mater. Sci. Lett. 16: 765Google Scholar
  79. Taylor J.A., G.B. Shaffer and D.H. StJohn, 1999, Met. Mater. Trans. 30A: 1643CrossRefGoogle Scholar
  80. Uhlmann D.R., B. Chalmers and K.A. Jackson, 1964, J. Appl. Phys. 35: 2986CrossRefGoogle Scholar
  81. Uram S.Z., M.C. Flemings and H.F. Taylor, 1958, AFS Trans. 66: 129Google Scholar
  82. Viswanathan S., A.J. Duncan, A.S. Sabau and Q. Han, 1998, in: Modeling of Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas and C. Beckermann eds., TMS, Warrendale, PA p. 49.Google Scholar
  83. Wallace J.F. and E.B. Evans, 1958, AFS Trans. 66: 49Google Scholar
  84. Walther W.D., C.M. Adams and H.F. Taylor, 1956, AFS Trans. 64: 658Google Scholar
  85. Whittenberger E.J. and F.N. Rhines, 1952, J Metals April:409.Google Scholar
  86. Wu Y., H. Liu and E.J. Lavernia, 1994, Acta Metall. Mater. 42: 825CrossRefGoogle Scholar
  87. Yaohui L., H. Zhenming, L. Shufan, Y. Zhanchao, 1993, J. Mat. Sci. 12: 254Google Scholar
  88. Zhu J.D. and I. Olmaka, 1991, in: Modeling of Casting, Welding and Advanced Solidification Processes V M. Rappaz, M.R. Ozgu and K. Mahin, eds, TMS, Warrendale, PA p. 435Google Scholar
  89. Zou J. and R. Doherty, 1993, in: Modeling of Casting, Welding and Advanced Solidification Processes VI, T.S. Piwonka, V. Voller and L. Katgerman, eds, TMS, Warrendale, PA p. 193Google Scholar
  90. Zubko A.M., V.G. Lobanov, and V.V. Nikonova, 1973, Sov_ Phys. Crystallogr. 18: 239Google Scholar

Copyright information

© Springer Science+Business Media New York 2002

Authors and Affiliations

  • Doru Michael Stefanescu
    • 1
  1. 1.University of AlabamaTuscaloosaUSA

Personalised recommendations