The Stress-Strain Behavior of Mechanically Degradable Polymers

  • R. J. Farris

Summary

Non-linear constitutive equations are developed for highly filled polymeric materials. These materials typically exhibit an irreversible stress softening called the “Mullins’ Effect.” The development stems from attempting to mathematically model the failing microstructure of these composite materials in terms of a linear cumulative damage model. It is demonstrated that pth order Lebesgue norms of the deformation history can be used to describe the state of damage in these materials and can also be used in the constitutive equations to characterize their time dependent response to strain distrubances. This method of analysis produces time dependent constitutive equations, yet they need not contain any internal viscosity contributions. This theory is applied to experimental data and shown to yield accurate stress predictions for a variety of strain inputs. Included in the development are analysis methods for proportional stress boundary valued problems for special cases of the non-linear constitutive equation.

Keywords

Constitutive Equation Relaxation Modulus Solid Propellant Cumulative Damage Fading Memory 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Farris, R. J., “Homogeneous Constitutive Equations for Materials with Permanent Memory,” Ph.D Thesis, University of Utah, Department of Civil Engineering (June 1970).Google Scholar
  2. 2.
    Farris, R. J., “Applications of Viscoelasticity to Filled Materials,” Master’s Thesis, University of Utah, Department of Civil Engineering (June 1969).Google Scholar
  3. 3.
    Mullins, L. J., “Effect of Stretching on the Properties of Rubber,” J. Rubber Res., 16, 275–289, (1947).Google Scholar
  4. 4.
    Mullins, L. J., “Permanent Set in Vulcanized Rubber,” Ind. Rubber World, 63–69 (1949).Google Scholar
  5. 5.
    Mullins, L. J., “Studies in the Absorption of Energy by Rubber,” J. Rubber Res., 16, 180–185 (1947).Google Scholar
  6. 6.
    Oberth, A. E., “Principle of Strength Reinforcement in Filled Polymers,” Rubber Chem. Tech., 40, 1337–1362 (1967).CrossRefGoogle Scholar
  7. 7.
    Bueche, F., “Molecular Basis for the Mullins Effect,” J. Appl. Polymer Sci., 4, 107–114 (1960).CrossRefGoogle Scholar
  8. 8.
    Bueche, F., “Mullins Effect and Rubber-Filler Interaction,” J. Appl. Polymer Sci., 5, 271–281 (1961).CrossRefGoogle Scholar
  9. 9.
    Farris, R. J., “Dilatation of Granular Filled Elastomers Under High Rates of Strain,” J. Appl. Polymer Sci., 8, 25–25 (1964).CrossRefGoogle Scholar
  10. 10.
    Farris, R. J., “The Character of the Stress-Strain Function for Solid Propellants,” Trans. Soc. Rheol., 12, 281–301 (1968).CrossRefGoogle Scholar
  11. 11.
    Farris, R. J., “The Influence of Vacuole Formation on the Response and Failure of Highly Filled Polymers,” Trans. Soc. Rheo., 12, 315–334 (1968).CrossRefGoogle Scholar
  12. 12.
    Williams, M. L., Blatz, P. J., and Schapery, R. A., “Fundamental Studies Relations to Systems Analysis of Solid Propellants,” GALCIT SM 61-S, California Institute of Technology, Pasadena, California (Feb 1961). A.so published in Interagency Chemical Rocket Propulsion Group, Solid Propellant Mechanical Behavior Manual, Chemical Propulsion Information Agency Pub. No. 21, Section 2. 3 (1963).Google Scholar
  13. 13.
    Royden, H. L., Real Analysis, III, 2nd Edition, The Macmillan Company, New York (1968).Google Scholar
  14. 14.
    Coleman, B. D., and Noll, W., “An Approximation Theorem for Functionals with Applications in Continuum Mechanics,” Arch. Rat. Mech. Anal., 6, 355–370 (1960).CrossRefGoogle Scholar
  15. 15.
    Timoshenko, S., and Goodier, J. N., Theory of Elasticity, McGraw-Hill Book Co., New York (1951).Google Scholar
  16. 16.
    Fung, Y. C., Foundations of Solid Mechanics, Prentice-Hall Inc., Englewood Cliffs, New Jersey (1965).Google Scholar
  17. 17.
    Sokolnikoff, I. S., Mathematical Theory of Elasticity, McGraw-Hill Book Co., New York (1956).Google Scholar
  18. 18.
    Eringen, A. C., Mechanics of Continua, John Wiley and Sons, Inc., New York (1967).Google Scholar
  19. 19.
    Eringen, A. C., Non-Linear Theory of Continuous Media, McGraw-Hill Book Co., New York (1962).Google Scholar
  20. 20.
    Malvern, L. E., Introduction to the Mechanics of a Continuous Media, Prentice-Hall, Inc., New Jersey (1969).Google Scholar
  21. 21.
    Volterra, V., Theory of Functionals and of Integral and Integro-Differential Equations, Dover Publications, Inc., New York (1959).Google Scholar
  22. 22.
    Green, A. E., and Rivlin, R. S., “The Mechanics of Non-Linear Materials with Memory, Part One,” Arch. Rat. Mech. Anal., 1, 1–21 (1959).CrossRefGoogle Scholar
  23. 23.
    Green, A. E., Rivlin, R. S., and Spencer, A. J. M., “The Mechanics of Non-Linear Materials with Memory, Part Two,” Arch. Rat. Mech. Anal., 3, 82–90 (1959).CrossRefGoogle Scholar
  24. 24.
    Green, A. E., and Rivlin, R. S., “The Mechanics of Non-Linear Materials with Memory, Part Three,” Arch. Rat. Mech. Anal., 4, 387–404 (1959).CrossRefGoogle Scholar
  25. 25.
    Rivlin, R. S., “Non-Linear Viscoelastic Solids,” SIAM Review, 7, 323–340 (1965).CrossRefGoogle Scholar
  26. 26.
    Pipkin, A. C., and Rivlin, R. S., “Small Deformations Superposed on Large Deformations in Materials with Fading Memory,” Arch. Rat. Mech. Anal., 8, 297–308 (1961).CrossRefGoogle Scholar
  27. 27.
    Freda, E.,,“Il Teorema di Eulers per le Funzioni di Linea Omogenee,” R. Acc. du LincEi, Rend., XXIV, 5, (1915).Google Scholar
  28. 28.
    Wylie, C. R., Jr., Advanced Engineering Mathematics, McGraw-Hill Book Co., New York (1960).Google Scholar
  29. 29.
    Love, A. E. H., The Mathematical Theory of Elasticity, 4th Ed., Dover Publications, Inc., New York (1944).Google Scholar
  30. 30.
    Swanson, S. R., “Development of Constiutive Equations for Rocks,” Ph.D. Dissertation, Dept. of Mechanical Eng., Univ. of Utah (1969).Google Scholar
  31. 31.
    Noll, W., “Mathematical Theory of the Mechanical Behavior of Continuous Media,” Arch. Rat. Mech. Anal., 2, 197–226, (1958).CrossRefGoogle Scholar
  32. 32.
    Pipkin, A. C., “Small Finite Deformations of Viscoelastic Solids,” Rev. Mod. Phys., 36, 1034–1041 (1964).CrossRefGoogle Scholar
  33. 33.
    Pipkin, A. C., and Rogers, T. G., “A Non-Linear Integral Representation for Viscoelastic Behavior,” J. Mech. Phys. Solids, 16, 59–72, (1968).CrossRefGoogle Scholar
  34. 34.
    Fréchet, M., “Sur Les Fonctionnelles Continues,” Ann. de L’Ecole Normale Sup., 27, 3rd Series (1910).Google Scholar
  35. 35.
    Herrmann, L. R., “On a General Theory of Viscoelasticity,” J. Franklin Inst., 280, 244–255 (1965).CrossRefGoogle Scholar
  36. 36.
    Onaran, K., and Findley, W. N., “Combined Stress-Creep Experiments on a Non-Linear Viscoelastic Material to Determine the Kernel Functions for a Multiple Integral Representation of Creep,” Trans. Soc. Rheol. 1, 299–327, (1965).CrossRefGoogle Scholar
  37. 37.
    Williams, M. L., “Structural Analysis of Viscoelastic Materials,” AIAA J., 2, 785–808 (1964).CrossRefGoogle Scholar
  38. 38.
    Tobolsky, A. V., Properties and Structure of Polymers, 160, John Wiley and Sons, Inc., New York (1960).Google Scholar
  39. 39.
    Schapery, R. A., “A Theory of Non-Linear Thermoviscoelasticity Based on Irreversible Thermodynamics,” Proc. Fifth U.S. Nat. Cong. of Appt. Mech., ASME, 511–530 (1966).Google Scholar
  40. 40.
    Schapery, R. A., “On the Characterization of Non-Linear Viscoelastic Materials,” Polymer Eng. Sci., 9, 295–310 (1969).CrossRefGoogle Scholar
  41. 41.
    McGuirt, C. W., and Lianis, G., “Experimental Investigation of Non-Linear Non-Isothermal Viscoelasticity,” Int. J. Eng. Sci., 7, 579–599 (1969).CrossRefGoogle Scholar
  42. 42.
    Frudenthal, A. M., “Strain Sensitive Response of Filled Elastomers,” Technical Report No. 24, Department of Civil Engineering and Engineering Mechanics, Columbia Univ., etc.Google Scholar
  43. 43.
    Flory, P. J., Principles of Polymer Chemistry, Cornell University Press, Ithaca, New York (1953).Google Scholar
  44. 44.
    Treloar, L. R. G., The Physics of Rubber Elasticity, Oxford, Clarendon Press, (1949).Google Scholar
  45. 45.
    Graham, P. H., and Robinson, C. N., “Analysis of Cumulative Damage in Solid Rocket Propellants by Application of Reaction Rate Methods to the Binder-Filler Separation Process,” Minutes of the Fourth Cumulative Damage Technical Coordination Meeting, North American Rockwell Corporation, McGregor, Texas (May 1968).Google Scholar
  46. 46.
    Bills, K. W., Jr., Svob, G. J., Planck, R. W., and Erickson, T. L., “A Cumulative-Damage Concept for Propellant-Liner Bonds in Solid Rocket Motors,” J. of Spacecraft, 3, 408–412, (1966).CrossRefGoogle Scholar
  47. 47.
    Fitzgerald, J. E., “Thermomechanical Coupling in Viscoelastic Materials,” Presentation at the International Conference on Structure, Solid Mechanics and Engineering Design in Civil Engineering Materials, Southampton, England (1969), Discussion to be published by John Wiley and Sons, Inc., New York.Google Scholar
  48. 48.
    Coleman, B. D., and Mizel, V. J., “Norms and Semi-Groups in the Field of Fading Memory,” Arch. Rat. Mech. Anal., 23, 87–123 (1966).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 1971

Authors and Affiliations

  • R. J. Farris
    • 1
  1. 1.College of EngineeringUniversity of UtahSalt Lake CityUSA

Personalised recommendations