Set Retarding Chemical Admixtures

  • Vance H. Dodson

Abstract

A set retarding admixture is defined as one that delays the time of setting of portland cement paste and hence that of its mixtures, such as mortars and concrete [1]. Consequences of this delay in the rate of hardening, or setting, include a delay in the development of the early strength of the concrete, mortar, or paste and an increase in later compressive strength of the respective cementitious masses. There are three types of retarding admixtures recognized by ASTM: Type B, which simply retards the hydration of the portland cement; Type D, which not only retards the hydration but also acts to disperse the cement and thereby provide water reduction; and finally Type G, which is a high range water reducing and set retarding admixture [2] . Some of the physical properties of concrete, specified by ASTM, treated with the three types of chemical set retarding admixtures have been previously listed in Table 2–1 (p. 24) .

Keywords

Compressive Strength Portland Cement Hydration Product American Concrete Institute Tricalcium Silicate 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    ACI 116, “Cement and Concrete Terminology,” American Concrete Institute, SP 19, Detroit, MI, pg. 117 (1988).Google Scholar
  2. [2]
    ASTM C494, “Standard Specification for Chemical Admixtures for Concrete,” Annual Book of ASTM Standards, Vol. 04.02, pp. 245–252 (1988) .Google Scholar
  3. [3]
    Lieber, W. , “The Influence of Lead and Zinc Compounds on the Hydration of Portland Cements,” Proceedings 5th International Symposium on the Chemistry of Cements, Tokyo, Vol. 2, pp. 444–453 (1968).Google Scholar
  4. [4]
    ASTM C403, “Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance,” Annual Book of ASTM Standards, Vol. 04.02, pp. 210–213 (1988) .Google Scholar
  5. [5]
    Daugherty, K.E., Skalny, J., “The Slowest Polymerization Reaction,” Chemistry, Vol. 45, No. 1, pp. 12–15 (1972).Google Scholar
  6. [6]
    Bruere, G. M., “Importance of Mixing Sequence When Using Set-Retarding Agents with Portland Cement,” Nature, Vol. 199, pg. 32 (1963) .CrossRefGoogle Scholar
  7. [7]
    Cook, H.K. , “Two Factors Affecting Results of ASTM Method C403; (1) Time of Addition of Admixture; (2) Use of Mortars in Lieu of Concrete,” Highway Research Board Meeting, Washington, DC, Jan. (1963).Google Scholar
  8. [8]
    Dodson, V.H. , Farkas, E. , “Delayed Addition of Set Retarding Admixtures to Portland Cement Concrete,” Proceedings, American Society for Testing and Materials, Vol. 64, pp. 816–826 (1965).Google Scholar
  9. [9]
    Blank, B. , Rossington, D.R. , Weinland, L.A. , “Adsorption of Admixtures on Portland Cement,” Journal of the American Ceramic Society, Vol. 46, No. 8, pp. 395–399 (1963).CrossRefGoogle Scholar
  10. [10]
    Young, J. F. , “A Review of the Mechanisms of Set-Retardation in Portland Cement Pastes Containing Organic Admixtures,” Cement and Concrete Research, Vol. 2, pp. 415–433 (1972).CrossRefGoogle Scholar
  11. [11]
    Ramachandran, V.S. , “Interaction of Calcium Lignosulfonate with Tricalcium Silicate, Hydrated Tricalcium Silicate and Calcium Hydroxide,” Cement and Concrete Reasearch, Vol. 2, No. 2, pp. 179–194 (1972) .CrossRefGoogle Scholar
  12. [12]
    Monosi, S. , Moriconi, E. , Pauri, M. , Collepardi, M. , “Influence of Lignosulfonate, Glucose and Gluconate on the C3A Hydration,” Cement and Concrete Research, Vol. 13, pp. 568–574 (1983).CrossRefGoogle Scholar
  13. [13]
    Collepardi, M. , Monosi, S. , Moriconi, G. , Pauri, M. , “Influence of Gluconate, Lignosulfonate and Glucose Admixtures on the Hydration of Tetracalcium Aluminoferrite in the Presence of Gypsum With or Without Calcium Hydroxide, ” Journal of the American Ceramic Society, Vol. 68, pp. 126–128 (1985) .CrossRefGoogle Scholar
  14. [14]
    ASTM C192, “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory,” Annual Book of ASTM Standards, Vol. 04.02, pp. 110–116 (1988).Google Scholar
  15. [15]
    ACI Commitee 305, “Hot Weather Concreting, ACI 305R-77,” American Concrete Institute Proceedings, Vol. 74, No. 8, pp. 324–325 (1977).Google Scholar
  16. [16]
    Mittelacher, M. , “Effect of Hot Weather Conditions on the Strength Performance of Set-Retarded Field Concrete,” Temperature Effects on Concrete, ASTM STP 858, American Society for Testing and Materials, Philadelphia, pp. 88–106 (1985).CrossRefGoogle Scholar
  17. [17]
    Tuthill, L.H. , Cordon, W.A., “Properties and Uses of Initially Retarded Concrete,” American Concrete Institute, Proceedings, Vol. 52, No. 3, pg. 282 (1955).Google Scholar
  18. [18]
    Berge, D. , “Improving the Properties of Hot-Mixed Concrete Using Retarding Admixtures,” American Concrete Institute, Proceedings, Vol. 73, No. 7, pg. 396 (1976).Google Scholar
  19. [19]
    Schmid, E. , Schutz, R.J. , “Steam Curing,” Journal, Prestressed Concrete Institute, Vol. 2, No. 2, pp. 37–40 (1957).Google Scholar

Copyright information

© Springer Science+Business Media New York 1990

Authors and Affiliations

  • Vance H. Dodson

There are no affiliations available

Personalised recommendations