Ski Loading and Flexure on a Groomed Snow Surface

  • David A. Lind
  • Scott P. Sanders
Chapter

Abstract

The American Society of Testing and Materials (ASTM) defines the bending stiffness of a ski by its deflection under a given load placed on the ski at its midpoint when the ski is supported at its tip and tail contact points. For a casual comparison of ski flexure values, the values obtained in this manner may be adequate. To determine a ski’s loading distribution and flexure in a real snow bed, we need to consider the distribution of the ski’s bending stiffness, which may be described by the relationships associated with the mechanics of a nonuniform beam in flexure [1]. A similar set of relations applies for analyzing the torsional stiffness of a ski; however, in this discussion we consider coupled bending and torsional deflections only qualitatively. We address the specific problem of predicting the edge loading on a ski when it bends to contact the packed and groomed surface of an alpine ski slope.

Keywords

Neutral Axis Torsional Stiffness Beam Deflection Initial Camber Shear Force Versus 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Reference

  1. 1.
    For a useful discussion of the mechanics of beams in flexure and torsion, see S. Timoshenko and J. N. Goodier, Theory of Elasticity, 2nd ed. (McGraw-Hill, New York, 1951), pp. 70–73.MATHGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2004

Authors and Affiliations

  • David A. Lind
    • 1
  • Scott P. Sanders
    • 2
  1. 1.University of ColoradoBoulderUSA
  2. 2.University of New MexicoAlbuquerqueUSA

Personalised recommendations