Dummy Performance in Crash Simulations Environments

  • A. M. Thomas

Abstract

A test procedure is presented whereby dummies can be subjected to a controlled and reproducible environment which is independent of the sled facility used. Essentially, a set of straps with slack in them couple the sled to the dummy. The deceleration phase of the sled occurs during the time that the slack is taken up, and a difference in velocity is established between sled and dummy. The straps then decelerate the dummy in a specific fashion independent of the shape of the deceleration time pulse of the sled. Results of measurements on four dummies subjected to such a test are presented. Both side facing and forward impacts were simulated, each at two different energy levels.

Maximum accelerations were about 50 g’s in the head and about 40 g’s in the chest. The standard deviation of 10 runs for both head and chest measurements averaged about 6%.

A procedure is described whereby a calibration number can be assigned to individual dummies so that results obtained in compliance testing can be more uniform.*

Keywords

Calibration Factor Maximum Acceleration Strip Chart Recorder Restraint System National Highway Traffic Safety 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    R. W. Armstrong, “NBS Dynamic Seat Belt Tester”, Tenth Stapp Car Crash Conference, SAE, 1967.Google Scholar
  2. 2.
    Studies of Inflating Restraint Systems’, Highway Safety Research Institute, University of Michigan, DOT Report HS-800497.Google Scholar
  3. 3.
    Test Procedures and Performance of Anthropomorphic Test Devices“, Safety Systems Laboratory, NHTSA, Docket No. 69–7 of NHTSA.Google Scholar
  4. 4.
    D. J. Evanoff, “Evaluation of Anthropomorphic Test Devices Response to Head, Chest, and Femur Impacts — Sierra 1050 vs. Alderson VIP-50A, 50th Percentile Male Dummies”, Ford Motor Company.Google Scholar

Copyright information

© Springer Science+Business Media New York 1973

Authors and Affiliations

  • A. M. Thomas
    • 1
  1. 1.National Highway Traffic Safety AdministrationUSA

Personalised recommendations