Introduction to Computer-Aided Design and Computer-Aided Manufacturing

  • C. S. George Lee
Part of the Management and Information Systems book series (MIS)

Abstract

In recent years, intense international competition has forced companies to seek better manufacturing techniques and systems with a higher level of automation to increase productivity gain and improve quality end product.(1–4,13) One of the possible solutions is through the effective use of digital computers and their peripherals in the design and manufacture of products. Because of the advancement of hardware and software in digital computers, their use in the design and manufacture of products has greatly reduced the manufacturing cost and constitutes substantial productivity gains in various industries. This application of digital computers in manufacturing has evolved into a new technology commonly known as computer-aided design and computer-aided manufacturing (CAD/CAM). Computer-aided design can be described as any design activity that effectively utilizes digital computers to create, retrieve, modify, draft, and store an engineering design; while the Computer-Aided Manufacturing—International defines computer-aided manufacturing as the effective utilization of computer technology in the management, control, and operations of the manufacturing facility through either direct or indirect computer interface with the physical and human resources of the company to produce high-quality end products.

Keywords

Tool Path Digital Computer Industrial Robot Assembly Task Numerically Control Machine 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    M. P. Grover, Automation, Production Systems and Computer Aided Manufacturing, Prentice Hall, Englewood Cliffs, New Jersey, 1980.Google Scholar
  2. 2.
    Y. Koren, Computer Control of Manufacturing Systems, McGraw-Hill, New York, 1983.Google Scholar
  3. 3.
    R. S. Pressman, Numerical Control and Computer Aided Manufacturing, Wiley, New York, 1977.Google Scholar
  4. 4.
    J. D. Foley, Fundamentals of Interactive Computer Graphics, Addison-Wesley, Reading, Massachusetts, 1982.Google Scholar
  5. 5.
    W. Myers, An industrial perspective on solid modeling, Ieee Comput. Graphics Appt. 2 (2), 86–97 (1982).CrossRefGoogle Scholar
  6. 6.
    A. Baer, C. Eastman, and M. Henrion, Geometric modeling: A survey, Comput. Aided Design 11 (5), 253–272, (1979).CrossRefGoogle Scholar
  7. 7.
    C. Eastman and K. Weiler, Geometric modeling using the Euler operators, Proceedings of First Annual Conference on Computer Graphics in Cad/Cam System, April, 1979.Google Scholar
  8. 8.
    A. A. G. Requicha, Representations for rigid solids: Theory, methods, and systems, Comp. Surv, 12 (4), 437–464, (1980).CrossRefGoogle Scholar
  9. 9.
    A. A. G. Requicha and H. B. Voelcker, Solid modeling: A historical summary and contemporary assessment, Ieee Comput. Graphics Appt 2 (2), 9–24 (1982).CrossRefGoogle Scholar
  10. 10.
    J. K. Krouse, Ed., Solid models for computer graphics, Mach. Des, 54 (12), (1982).Google Scholar
  11. 11.
    M. Wesley, Construction and use of geometric models, in Computer Aided Design Modelling, System Engineering, Cad-Systems, J. Encarnacas, Ed., Springer-Verlag, New York, 1980, Chap. 2, pp. 79–136.Google Scholar
  12. 12.
    L. Lieberman and M. Wesley, Autopass: An automatic programming system for computer controlled mechanical assembly, Ibm J. Res. Dev, 21 (4), 321–333, (1977).CrossRefGoogle Scholar
  13. 13.
    Mech. Eng,Cad/Cam: A special issue. November (1981).Google Scholar
  14. 14.
    Ieee Comput. Graphics Appi,October and November (1983) issues.Google Scholar
  15. 15.
    T. O. Binford, The AL language for intelligent robots, in Proceedings of the Iria Seminar on Languages and Methods of Programming Industrial robots, Rocquencourt, France, June, 1979, pp. 73–87.Google Scholar
  16. 16.
    D. D. Grossman, and R. H. Taylor, Interactive generation of object models with a manipulator, Ieee Trans. Syst. Man and Cybern. Smc- 8 (9), 667–679 (1978).Google Scholar
  17. W. A. Gruver et al,Industrial robot programming languages: A comparative evaluation, Ieee Trans. Syst. Man and Cybern. Smc-14(4), 321–333 (1984).Google Scholar
  18. 18.
    C. S. G. Lei:, K. S. Fu, and R. C. Gonzalez, Tutorial in Robotics,Ieee Computer Press, New York, November, 1983, 573 pages.Google Scholar
  19. 19.
    T. Lozano-Perez, Automatic planning of manipulator transfer movements, Ieee Trans. Syst. Man and Cybern. Smc-11(10), 681–698 (1981).Google Scholar
  20. 20.
    T. Lozano-Perez, Robot programming, Proc. Ieee 71 (7), 821–841 (1983).Google Scholar
  21. 21.
    Error! Hyperlink reference not valid al. An overview of AL, a programming language for automation, Proceedings of the Fourth International Joint Conference on Artificial Intelligence, 1975, pp. 758–765.Google Scholar
  22. 22.
    M. S. Mujtaba, R. Goldman, and T. Binford, The AL robot programming language, Comput. Eng 2, 77–86 (1982).Google Scholar
  23. 23.
    R. P. Paul, Robot Manipulators: Mathematics, Programming, and Control, Mit Press, Cambridge, Massachusetts, 1981.Google Scholar
  24. 24.
    R. P. Paui., Wave: A model-based language for manipulator control, Technical Paper MR76–615, Society of Manufacturing Engineers, Dearborn, Michigan, 1976.Google Scholar
  25. 25.
    R. J. Poppi.Estoni:, A. P. Ambler, and I. Bei.Los, Rapt, A language for describing assemblies, Artif. Intell 14 (1), 79–107 (1980).CrossRefGoogle Scholar
  26. 26.
    R. H. Taylor, P. D. Summers, and J. M. Meyer, Aml: A manufacturing language, Intl. J. Robotics Res 1 (3), 19–41 (1983).CrossRefGoogle Scholar
  27. 27.
    B. Shimano, Val: A versatile robot programming and control system,“ Proceedings of Compsac 79, Third International Computer Software Applications Conference, Chicago, Illinois, 1979.Google Scholar
  28. 29.
    K. Takase and R. P. Paul, A structured approach to robot programming and teaching, Ieee Trans. Syst. Man Cybern., Smc-11(4), 274–289, (1981).Google Scholar
  29. 30.
    Y. Kalay, A relational database for non-manipulative representation of solid objects, Comput. Aided Design 15 (5), 271–276, (1983).MathSciNetCrossRefGoogle Scholar
  30. 31.
    G. M. E. Lafue, Integrating language and database for Cad applications, Comput. Aided Design 11 (3), 127–130, (1979).CrossRefGoogle Scholar
  31. 32.
    W. E. Fischer, Phidas—A database management system for Cad/Cam application software, Comput. Aided Design 11(3), 146–150, (1979).Google Scholar

Copyright information

© Springer Science+Business Media New York 1985

Authors and Affiliations

  • C. S. George Lee
    • 1
  1. 1.School of Electrical EngineeringPurdue UniversityWest LafayetteUSA

Personalised recommendations