Encode—Decode Noise Reduction (NR) Systems

  • John Eargle

Abstract

This chapter will discuss methods of compressing (encoding) a signal before it is recorded, and expanding (decoding) it when it is played back. In this manner, the compressed signal can be kept above the noise level of the recording medium. If the tracking of the playback expansion action is the inverse of the compression action, then the original dynamic relationships in the program will be kept intact. In the process, however, the recorder’s noise floor will be modulated by the expansion action.

Keywords

Noise Reduction Wide Dynamic Range Noise Floor Gain Curve Noise Modulation 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Bibliography

  1. 1.
    D. Blackmer, “A Wide Dynamic Range Noise Reduction System,” db Magazine, vol. 6, no. 8 (1972).Google Scholar
  2. 2.
    R. Burwen, “Design of a Noise Elimination System,” J.Audio Engineering Society, vol. 19, no. 11 (19/1).Google Scholar
  3. 3.
    R. Dolby, “An Audio Noise Reduction System,” J.Audio Engineering Society, vol. 15, no. 4(1967).Google Scholar
  4. 4.
    R. Dolby, “The Spectral Recording Process,” J.Audio Engineering Society, vol. 35, no. 3 (1987).Google Scholar
  5. 5.
    J. Eargle, “Hands on: The Dolby Cat. 280 Spectral Recording module,” Recording Engineer/Producer, vol. 18, no. 2 (1987).Google Scholar
  6. 6.
    J. Wermuth, “Compander Increases Dynamic Range,” db Magazine, (June 1976).Google Scholar
  7. 7.
    J. Woram, Sound Recording Handbook, H. Sams, Indianapolis (1989).Google Scholar

Copyright information

© Springer Science+Business Media New York 1992

Authors and Affiliations

  • John Eargle

There are no affiliations available

Personalised recommendations