Control Rooms and the Monitoring Environment
The modern recording studio control room must provide space for recording equipment, operators, producers, musicians, and occasional visiting VIPs. It must provide good sight lines into the studio, and acoustical leakage from the studio or any associated isolation booths into the control room must be acceptably low. Air handling in the control room must be efficient and quiet. In addition to these requirements, the space must satisfy its own special acoustical requirements in terms of sound absorption and reflection.
KeywordsSound Source Control Room Sound Absorption Monitoring Position Direct Sound
Unable to display preview. Download preview PDF.
- 1.G. Augspurger, “Loudspeakers in Control Rooms and Living Rooms,” Proceedings of the AES 8th International Conference, “The Sound of Audio,” Washington, DC, 3–6 May 1990 pp. 171–178.Google Scholar
- 2.C. Davis and G. Meeks, “History and Development of the LEDE Control Room Concept,” preprint number 1954; paper delivered at the AES Convention, Los Angeles, 1982.Google Scholar
- 3.P. D’Antonio and J. Konnert, “The Reflection Phase Grating Diffusor: Theory and Application,” J. Audio Engineering Society, vol. 32, no. 4 (1984)Google Scholar
- 4.D. Davis and C. Davis, “The LEDE Concept for the Control of Acoustic and Psychoacoustic Parameters in Recording Control Rooms,” J. Audio Engineering Society, vol. 28, no. 9 (1980).Google Scholar
- 5.F. Everest, Acoustic Techniques for Home & Studio, TAB Books, Blue Ridge Summit, Pa. (1973).Google Scholar
- 6.H. Olson, Acoustical Engineering, D. Van Nostrand, New York (1957).Google Scholar
- 7.M. Schroeder, “Progress in Architectural Acoustics and Artificial Reverberation: Concert Hall Acoustics and Number Theory,” J. Audio Engineering Society, vol. 32, no. 4 (1984).Google Scholar
- 8.H. Staffeldt, “The Subjectively Perceived Frequency Response in Small and Medium Sized Rooms,” J. Society of Motion Picture and Television Engineers, vol. 91, no. 7 (1982).Google Scholar
- 9.H. Staffeldt, “Measurements and Prediction of Timbre of Sound Reproduction,” J. Audio Engineering Society, vol. 32, no. 6 (1984).Google Scholar