Thermal Stratification in Closed Cryogenic Containers

  • S. C. Fan
  • J. C. Chu
  • L. E. Scott
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 14)

Abstract

In the absence of agitation [1] or any effective means [2] to provide heat paths vertically, thermal stratification is a rather common occurrence in cryogens stored in cryogenic containers. Stratification results because the warmer layer has the lower density, and the fluid itself is a poor heat conductor. As a result of stratification, the system pressure will become higher than that corresponding to the average liquid temperature. Stratification shortens the storing period between successive ventings, or a stronger wall vessel has to be used. In the case of liquid nitrogen in equilibrium with its vapor, a rise of 1°R represents a pressure increase of 4 to 10 psi. Since a difference of 15° to 40°R can be developed, this may lead to a design pressure increase up to 400 psi. However thermal stratification can be advantageous to the transfer of liquefied gases from storage, to permit the delivery of subcooled liquid or to attain the net positive suction head required for pumping.

Keywords

Thermal Stratification Bulk Liquid Liquid Level Vent Valve Schlieren Photograph 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    S. C. Huntley, “Temperature-Pressure Relations in a Closed Cryogenic Container,” NACA TN-4259, Cleveland, Ohio (Feb., 1958).Google Scholar
  2. 2.
    L. E. Scott, R. F. Robbins, D. B. Mann, and B. W. Birmingham, J. NBS Res., Eng. Instr., 64C (1):19 (1960).Google Scholar
  3. 3.
    J. W. Tatom, W. H. Brown, L. H. Knight, and E. F. Coxe, in: Advances in Cryogenic Engineering, Vol 9, Plenum Press, New York (1964), p. 265.Google Scholar
  4. 4.
    G. C. Vliet, J. J. Brogan, T. S. Sheppard, F. H. Morse, and F. L. Hines, AIAA Preprint No. 64–37, Aero-Space Sci. Mtg., New York (Jan. 1964).Google Scholar
  5. 5.
    R. W. Arnett and D. R. Millhiser, “A Method for Analyzing Thermal Stratification and Self-Pressurization in a Fluid Container,” NBS Rept. 8777 (Apr. 1965).Google Scholar
  6. 6.
    T. E. Bailey and R. F. Fearn, in: Advances in Cryogenic Engineering, Vol. 9, Plenum Press, New York (1964), p. 254.Google Scholar
  7. 7.
    T. E. Bailey, R. Vandekoppel, and G. Skartvedt, AIAA J., 1(7):1657 (1963).CrossRefGoogle Scholar
  8. 8.
    J. H. Robbins and A. C. Rogers, “An Analysis on Predicting Thermal Stratification in Liquid Hydrogen,” AIAA Paper No. 64–426, presented at AIAA Ann. Mtg., Washington, D.C. (June 29, 1964).Google Scholar
  9. 9.
    E. R. G. Eckert and T. N. Jackson, “Analysis of Turbulent Free-Convection Boundary Layer on Flat Plate,” NACA TR-1015 (1951).Google Scholar
  10. 10.
    J. A. Clark and H. Z. Barakat, “Transient, Laminar, Free-Convection Heat and Mass Transfer in Closed, Partially Filled, Liquid Containers,” Office of Research Administration, University of Michigan, Ann Arbor, Mich. (1964).Google Scholar
  11. 11.
    A. F. Schmidt, J. R. Purcell, W. A. Wilson, and R. V.. Smith, J. NBS Res. Eng. Instr., 65C (2):81 (1961).Google Scholar
  12. 12.
    M. P. Segel, in: International Advances in Cryogenic Engineering, Plenum Press, New York (1965), p. 308.Google Scholar
  13. 13.
    S. C. Fan, Ph.D. Dissertation, Polytechnic institute of Brooklyn, Brooklyn, N.Y. (1967).Google Scholar
  14. 14.
    H. S. Carslaw, Heat Conduction in Solids, 2nd ed., Oxford Press, London, England (1959).Google Scholar

Copyright information

© Springer Science+Business Media New York 1969

Authors and Affiliations

  • S. C. Fan
    • 1
  • J. C. Chu
    • 1
  • L. E. Scott
    • 2
  1. 1.Polytechnic Institute of BrooklynBrooklynUSA
  2. 2.Air Reduction CompanyMurray HillUSA

Personalised recommendations