Advertisement

Temperature Measurements in Cryogenic Engineering

  • R. J. Corruccini
Conference paper
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 8)

Abstract

In this review no attempt will be made to provide a detailed treatment of low-temperature thermometry inasmuch as several[1–4] are already available.* Instead, only a cursory review of some well-known facts will be given in order to provide an introduction to discussions of recent developments in this field and techniques that are especially well-suited to engineering experimentation. Temperatures below 1°K will not be considered. Because of this special orientation, little or nothing will be said about certain topics that usually command considerable attention, such as precision gas thermometry and magnetic thermometry.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    R. P. Hudsons Experimental Cryophysics, F. E. Hoare, L. C. Jackson, and N. Kurti (eds.), Butterworths, London (1961), chapt 9. (Also see the Appendices.)Google Scholar
  2. 2.
    R. B. Scott, Cryogenic Engineering, D. van Nostrand Co., Inc., Princeton, N.J. (1959), chapt. 5.Google Scholar
  3. 3.
    G. K. White, Experimental Techniques in Low-Temperature Physics, Oxford (1959), chapts. 4, 6 and 7.Google Scholar
  4. 4.
    F. Din and A. H. Cockett, Lozv-Temperature Techniques, George Newnes Ltd., London (1960), chapt. 3.Google Scholar
  5. 5.
    C. R. Barber, Progress in Cryogenics, Vol. 2, K. Mendelssohn (ed.), Academic Press, Inc., New York (1960), p. 149.Google Scholar
  6. 6.
    G. K. White and S. B. Woods, Rev. Sci. Instr., Vol. 28, 638 (1957).CrossRefGoogle Scholar
  7. 7.
    B. Yates and C. H. Panter, J. Sci. Instr., Vol. 38, 196 (1961).CrossRefGoogle Scholar
  8. 8.
    E. H. Sondheimer and A. H. Wilson, Proc. Roy. Soc. (London), Vol. A190, 435 (1947).CrossRefGoogle Scholar
  9. 9.
    M. Kohler, Z. Physik, Vol. 126, 495 (1949).CrossRefGoogle Scholar
  10. 10.
    R. J. Corruccini, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962) p. 329.Google Scholar
  11. 11.
    F. D. Werner, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 2, Reinhold Publishing Corp., New York (1962), p. 297.Google Scholar
  12. 12.
    R. J. Corruccini, NBS Tech. Note 147 (1962).Google Scholar
  13. 13.
    S. A. Friedberg, Temperature, Its Measurement and Control in Science and Industry, Vol. 2, Reinhold Publishing Corp., New York (1955), chapt. 20.Google Scholar
  14. 14.
    H. H. Plumb and M. H. Edlow, Rev. Sci. Instr., Vol. 30, 376 (1959).CrossRefGoogle Scholar
  15. 15.
    M. H. Edlow and H. H. Plumb, Advances in Cryogenic Engineering, Vol. 6, K. D. Timmerhaus (ed.), Plenum Press, New York (1961), p. 542.CrossRefGoogle Scholar
  16. 16.
    A. C. Herr, H. G. Terbeek, and M. W. Tiefermann, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 2, Reinhold Publishing Corp., New York (1962), p. 355Google Scholar
  17. 17.
    F. J. Low, Advances in Cryogenic Engineering, Vol. 7, K. D. Timmerhaus (ed.), Plenum Press New York (1962), p. 514.CrossRefGoogle Scholar
  18. 18.
    J. S. Blakemore, J. W. Schultz, and J. G. Myers, Rev. Sci. Instr., Vol. 33, 545 (1962).CrossRefGoogle Scholar
  19. 19.
    J. S. Blakemore, Rev. Sci. Instr., Vol. 33, 106 (1962).CrossRefGoogle Scholar
  20. 20.
    R. L. Powell, L. P. Caywood, W. K. Bertram, and J. L. Harden, National Bureau of Standards, Boulder, Colorado, unpublished work.Google Scholar
  21. 21.
    W. G. Brombacher, D. P. Johnson, and J. L. Cross, NBS Monograph 8 (1960).Google Scholar
  22. 22.
    P. Lindenfeld, Rev. Sci. Instr., Vol 32, 9 (1961).CrossRefGoogle Scholar
  23. 23.
    H. B. Sachse, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 2, Reinhold Publishing Corp., New York (1962), p. 347.Google Scholar
  24. 24.
    W. Hogan, J. Nicol, and S. Shapiro, Advances in Cryogenic Engineering, Vol. 8, K. D. Timmerhaus (ed.), Plenum Press, New York (1963), paper F-3.Google Scholar
  25. 25.
    R. L. Powell, M. D. Bunch, and R. J. Corruccini, Cryogenics, Vol. 1, 139 (1961).CrossRefGoogle Scholar
  26. 26.
    R. L. Powell, L. P. Caywood, and M. D. Bunch, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 2, Reinhold Publishing Corp., New York (1962), p. 65.Google Scholar
  27. 27.
    W. F. Roeser, Temperature, Its Measurement and Control in Science and Industry, Vol. 1, Reinhold Publishing Corp., New York (1941), p. 180;Google Scholar
  28. 27a.
    D. I. Finch, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 2, Reinhold Publishing Corp., New York (1962), p. 3.Google Scholar
  29. 28.
    D. K. C. MacDonald, W. B. Pearson, and I. M. Templeton, Proc. Roy. Soc. (London), Vol. A266, 161 (1962).CrossRefGoogle Scholar
  30. 29.
    R. L. Powell, H. M. Roder, and W. M. Rogers, J. Appl. Phys., Vol. 28, 1282 (1957).CrossRefGoogle Scholar
  31. 30.
    A. V. Gold, D. K. C. MacDonald, W. B. Pearson, and I. M. Templeton, Phil. Mag., Vol. 5, 765 (1960).CrossRefGoogle Scholar
  32. 31.
    R. L. Powell and L. P. Caywood, Advances in Cryogenic Engineering, Vol. 7, K. D. Timmerhaus (ed.), Plenum Press, New York (1962), p. 517.CrossRefGoogle Scholar
  33. 32.
    G. Borelius, W. H. Keesom, and C. H. Johansson, Leiden Comm. No. 196a (1928).Google Scholar
  34. 33.
    G. A. Slack, Phys. Rev., Vol. 122, 1454 (1961).Google Scholar
  35. 34.
    R. L. Powell, M. D. Bunch, and E. F. Gibson, J. Appl. Phys., Vol. 31, 504 (1960).CrossRefGoogle Scholar
  36. 35.
    H. Shenker, J. I. Lauritzen, R. J. Corruccini, and S. T. Lonberger, NBS Circular 561 (1955).Google Scholar
  37. 36.
    T. R. Roberts, S. G. Sydoriak, and R. H. Sherman, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962) p. 75.Google Scholar
  38. 37.
    S. G. Sydoriak, T. R. Roberts, and R. H. Sherman, Paper 7.23, Eighth Int. Congr. on Low Temp. Phys., London (Sept. 16–22, 1962).Google Scholar
  39. 38.
    F. G. Brickwedde; and H. van Dijk, M. Durieux, J. R. Clement, and J. K. Logan, NBS J. Res. Vol. 64A, 1 (1960); reprinted as NBS Monograph 10 (1960).CrossRefGoogle Scholar
  40. 39.
    L. A. Weber, D. E. Diller, H. M. Roder, and R. D. Goodwin, Cryogenics, Vol. 2, 236 (1962).CrossRefGoogle Scholar
  41. 40.
    H. W. Woolley, R. B. Scott, and F. G. Brickwedde, NBS J. Res., Vol. 41, 453 (1948); RP1932.Google Scholar
  42. 41.
    D. White, A. S. Friedman, and H. L. Johnston, J. Am. Chem. Soc., Vol. 72, 3927 (1950).CrossRefGoogle Scholar
  43. 42.
    E. R. Grilly, J. Am. Chem. Soc., Vol. 73, 843 (1951).CrossRefGoogle Scholar
  44. 43.
    E. R. Grilly, Cryogenics, Vol. 2, 226 (1962).CrossRefGoogle Scholar
  45. 44.
    T. R. Strobridge, NBS Tech. Note 129 (1962).Google Scholar
  46. 45.
    A. M. Clark, F. Ding and J. Robb; and A. Michels, T. Wassenaar, and T. Zwietering, Physica, Vol.17, 876 (1951).CrossRefGoogle Scholar
  47. 46.
    W. T. Ziegler, J. C. Mullins, and B. S. Kirk, Tech. Rep. No. 2, Proj. No. A-460, Engineering Expt. Sta., Georgia Inst, of Tech. (1962).Google Scholar
  48. 47.
    J. Hilsenrath, et al., NBS Circular 564 (1955).Google Scholar
  49. 48.
    H. H. Plumb, M. H. Edlow, and G. Cataland, Progress in Refrigeration Science and Technology, Vol. 1, Pergamon Press, New York (1960), p. 184.Google Scholar
  50. 49.
    G. Cataland, M. H. Edlow, and H. H. Plumb, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962), p. 413.Google Scholar
  51. 50.
    A. L. Hedrich and D. R. Pardue, Temperature, Its Measurement and Control in Science and Industry, Vol. 2, Reinhold Publishing Corp., New York (1955), chapt. 21.Google Scholar
  52. 51.
    A. van Itterbeek, G. Forrez, C. G. Sluijter, and G. Vaes, Annexe 1958–1, Bull. Inst. Int. Froid, (1958), p. 155.Google Scholar
  53. 52.
    G. Cataland, M. H. Edlow, and H. H. Plumb, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962), p. 129.Google Scholar
  54. 53.
    H. L. Fink, Can. J. Phys. Vol. 37, 1397 (1959).CrossRefGoogle Scholar
  55. 54.
    H. J. Hoge, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Pari 2, Reinhold Publishing Corp., New York (1962), p. 907.Google Scholar
  56. 55.
    C. R. Barber, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962) p. 103.Google Scholar
  57. 56.
    C. R. Barber, Brit. J. Appl. Phys., Vol. 13, 235 (1962).CrossRefGoogle Scholar
  58. 57.
    R. B. Scott, Cryogenic Engineering, D. van Nostrand Co., Inc., Princeton, N.J. (1959), p. 115.Google Scholar
  59. 58.
    H. van Dijk, Temperature, Its Measurement and Control in Science and Industry, Vol. 2, Reinhold Publishing Corp., New York (1955), chapt. 13.Google Scholar
  60. 59.
    M. Durieux, “Thermometry at Liquid Helium and Liquid Hydrogen Temperatures,” Ph.D. Thesis, Leiden (1960).Google Scholar
  61. 60.
    M. J. M. Leask and W. P. Wolf, Progress in Refrigeration Science and Technology, Vol. 1, Pergamon Press, New York (1960), p. 179.Google Scholar
  62. 61.
    J. G. Daunt, “Thermometers for the Temperature Range 0.1°K to 20°K,” ASTIA AD228661 (1959).Google Scholar
  63. 61a.
    See also J. G. Daunt, D. O. Edwards, M. Kreitman, R. C. Pandorf, and J. W. Snider, Proceedings of the VIIth International Conference on Low Temperature Physics, U. Toronto Press (1961), p. 96.Google Scholar
  64. 62.
    G. B. Benedek and T. Kushida, Rev. Sci. Instr., Vol. 28, 92 (1957).CrossRefGoogle Scholar
  65. 63.
    A. C. Gossard, V. Jaccarino, and J. P. Remeika, Phys. Rev. Letters, Vol. 7, 122 (1961).CrossRefGoogle Scholar
  66. 64.
    A. Narath, Phys. Rev. Letters, Vol. 7, 410 (1961).CrossRefGoogle Scholar
  67. 65.
    L. E. Barton, Electronics (May 4, 1962), p. 38.Google Scholar
  68. 66.
    W. H. Wade and L. J. Slutsky, Rev. Sci. Instr., Vol. 33, 212 (1962).CrossRefGoogle Scholar
  69. 67.
    I. Gorini and S. Sartori, Rev. Sci. Instr., Vol. 33, 883 (1962).CrossRefGoogle Scholar
  70. 68.
    T. M. Flynn, H. Hinnah, and D. E. Newell, Advances in Cryogenic Engineering, Vol. 8, K. D. Timmerhaus (ed.), Plenum Press, New York (1963), paper F-2.Google Scholar
  71. 69.
    H. F. Stimson, NBS J. Res., Vol. 65A, 139 (1961); reprinted as NBS Monograph 37 (1961).CrossRefGoogle Scholar
  72. 70.
    H. J. Hoge and F. G. Brickwedde, NBS J. Res., Vol. 22, 351 (1939).Google Scholar
  73. 71.
    R. B. Scott, Temperature, Its Measurement and Control in Science and Industry, Vol. 2, Reinhold Publishing Corp., New York (1955), chapt. 11.Google Scholar
  74. 72.
    See papers by Corruccini, Harper et al., Barber, Orlova, and van Dijk, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962), Sec. VII.Google Scholar
  75. 73.
    H. van Dijk, Temperature, Its Measurement and Control in Science and Industry, Vol. 3, Part 1, Reinhold Publishing Corp., New York (1962), p. 173.Google Scholar
  76. 74.
    H. J. Hoge, Temperature, Its Measurement and Control in Science and Industry, Vol. 1, Reinhold Publishing Corp., New York (1941), p. 141.Google Scholar
  77. 75.
    NBS Tech. News Bull, Vol. 45, 62 (1961).Google Scholar
  78. 76.
    NBS Tech. Nezus Bull, Vol. 45, 44 (1961).Google Scholar
  79. 77.
    J. E. Bauerle, Rev. Sci. Instr., Vol. 32, 313 (1961).CrossRefGoogle Scholar
  80. 78.
    R. L. Powell and W. A. Blanpied, NBS Circular 556 (1954).Google Scholar
  81. 79.
    R. Berman, E. L. Foster, and H. M. Rosenberg, Brit. J. Appl. Phys., Vol. 6, 181 (1955).CrossRefGoogle Scholar
  82. 80.
    V. J. Johnson (ed.), A Compendium of the Properties of Materials at Low Temperatures, WADD Tech. Report 60–56, Part I.Google Scholar
  83. 81.
    V. J. Johnson (ed.), A Compendium of the Properties of Materials at Low Temperatures, WADD Tech. Report 60–56, Part IV.Google Scholar

Copyright information

© Springer Science+Business Media New York 1963

Authors and Affiliations

  • R. J. Corruccini
    • 1
  1. 1.CEL National Bureau of StandardsBoulderUSA

Personalised recommendations