Low-Temperature Seals for Plastic Windows

  • K. B. Martin
  • T. H. Fields
  • E. G. Pewitt
  • J. G. Fetkovich
Conference paper
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 9)

Abstract

A double seal has been developed to seal the Plexiglas lens window to the stainless steel body of the 10-in. superconducting magnet bubble chamber shown in Fig. 1. A plastic window material, rather than glass, was selected for three reasons. First, the plastic material can more conveniently be fabricated into the unusual shape required by the geometry of the chamber. Second, the lens window is part of the moving assembly of the expansion system, so that light weight is desirable. Third, a plastic window should have greater resistance per unit mass to shock loads than glass. Accelerations of 50–100 g are expected, since the chamber is expanded and recompressed in about 10 msec.

Keywords

Leak Detector Bubble Chamber Chamber Body Silver Alloy Pure Indium 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    D. Parmentier, Jr., Rev. Sci., Instr., 26, 728 (July, 1955).CrossRefGoogle Scholar
  2. 2.
    R. H. Kropschot and R. P. Mikeseti, J. Appl. Phys., 28, 610 (May, 1957).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 1964

Authors and Affiliations

  • K. B. Martin
    • 1
  • T. H. Fields
    • 1
  • E. G. Pewitt
    • 1
  • J. G. Fetkovich
    • 1
  1. 1.Argonne National LaboratoryArgonneUSA

Personalised recommendations