Nucleate and Film Boiling Heat Transfer to Nitrogen and Methane at Elevated Pressures and Large Temperature Differences

  • E. L. ParkJr.
  • C. P. Colver
  • C. M. Sliepcevich
Part of the Advances in Cryogenic Engineering book series (ACRE, volume 11)

Abstract

Boiling heat transfer to cryogenic liquids has an obvious immediate application in the cooling of nuclear reactors, regenerative cooling of rocket engines, and industrial processes. In many instances these systems involve simultaneous, localized nucleate and film boiling as well as convective heat transfer at elevated pressures. Gross design data can be obtained for specific applications with all of these heat transfer modes occurring, but the key to eventual understanding lies in obtaining information on each process separately.

Keywords

Heat Transfer Heat Flux Convective Heat Transfer Boiling Heat Transfer Test Heater 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    J. N. Addoms, Sc. D. Dissertation, Massachusetts Institute of Technology (1948);Google Scholar
  2. 1a.
    W. H. McAdams, Heat Transmission, 3rd ed., McGraw-Hill Book Company, New York (1954).Google Scholar
  3. 2.
    J. T. Banchero, G. E. Barker, and R. H. Boll, Chem. Eng. Progr., Symp. Sen 55:87 (1959).Google Scholar
  4. 3.
    P. J. Berenson, Trans. ASME, J. Heat Transfer, Series C 83(3) (August 1961).Google Scholar
  5. 4.
    B. P. Breen and J. W. Westwater, Chem. Eng. Progr. 58:67 (July 1962).Google Scholar
  6. 5.
    E. G. Brentari and R. V. Smith, in: International Advances in Cryogenic Engineering, Plenum Press, New York (1965), p. 325.Google Scholar
  7. 6.
    L. A. Bromley, Chem. Eng. Progr. 46:221 (May 1950).Google Scholar
  8. 7.
    C. Corty and A. S. Foust, Chem. Eng. Progr., Symp. Ser. 51:1 (1955).Google Scholar
  9. 8.
    M. T. Cichelli and C. F. Bonilla, Trans. A.I.Ch.E. 41:755 (1945).Google Scholar
  10. 9.
    V. E. Denny, “Some Effects of Surface Micro-Geometry on Natural Convection and Pool Boiling Heat Transfer to Saturated Carbon Tetrachloride” Ph. D. Dissertation, University of Minnesota (1961).Google Scholar
  11. 10.
    T. M. Flynn, J. W. Draper, and J. J. Roos, in: Advances in Cryogenic Engineering, Vol. 7, Plenum Press, New York (1962), p. 539.Google Scholar
  12. 11.
    T. H. K. Frederking, in: Advances in Cryogenic Engineering, Vol. 8, Plenum Press, New York (1963), p. 489.Google Scholar
  13. 12.
    T. H. K. Frederking, in: Advances in Cryogenic Engineering, Vol. 9, Plenum Press, New York (1964) p. 71.Google Scholar
  14. 13.
    T. H. K. Frederking and J. A, Clark, in: Advances in Cryogenic Engineering, Vol. 8, Plenum Press, New York (1963), p. 501.Google Scholar
  15. 14.
    W. Gambill, “An Experimental Investigation of the Inherent Uncertainty in Pool-Boiling Critical Heat Fluxes to Saturated Water,” Paper presented at the A.I.Ch.E. Meeting, San Juan, Puerto Rico (October 1963).Google Scholar
  16. 15.
    G. G. Haselden and J. I. Peters, Trans.. Inst. Chem. Eng. (London) 27:201 (1949).Google Scholar
  17. 16.
    Y. Y. Hsu and J. W. Westwater, Chem. Eng. Progr., Symp. Ser. 56(30) :15 (1960).Google Scholar
  18. 17.
    H. M. Kurihari and J. E. Myers, A.I.Ch.E.J. 6:83 (1960).CrossRefGoogle Scholar
  19. 18.
    S. S. Kutateladze, Isv. Akad. Nauk USSR, Otd. Tekhn. Nauk 4:342 (1951).Google Scholar
  20. 19.
    J. H. Lienhard and V. E. Schrock, J. Heat Transfer 85:261 (1963).CrossRefGoogle Scholar
  21. 20.
    D. N. Lyon, P. G. Kosky, and B. N. Harman, in: Advances in Cryogenic Engineering, Vol. 9, Plenum Press, New York (1964), p. 77.Google Scholar
  22. 21.
    R. J. Richards, W. G. Steward, and R. B. Jacobs, “A Survey of the Literature on Heat Transfer from Solid Surfaces to Cryogenic Fluids,” NBS Technical Note No. 122 (October 1961).CrossRefGoogle Scholar
  23. 22.
    W. M. Rohsenow and P. Griffith, Chem. Eng. Progr., Symp. Ser., 52:47 (1956).Google Scholar
  24. 23.
    P. Roubeau, Progress in Refrigeration Science and Technology, Vol. 1, Pergamon Press, Inc., New York, (1960) p. 49.Google Scholar
  25. 24.
    N. Zuber and M. Tribus, “Further Remarks on the Stability of Boiling Heat Transfer,” AECU-3631 (January 1958).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 1966

Authors and Affiliations

  • E. L. ParkJr.
    • 1
  • C. P. Colver
    • 1
  • C. M. Sliepcevich
    • 1
  1. 1.University of OklahomaNormanUSA

Personalised recommendations