Advertisement

Additives and Chemicals in Plastics

  • Anthony L. Andrady
  • Nepali Rajapakse
Chapter
Part of the The Handbook of Environmental Chemistry book series (HEC, volume 78)

Abstract

Global production of plastics is clearly on the increase and plastic products have become an inextricable part of our everyday life. Over a short span of about 75 years plastics have penetrated diverse application areas replacing conventional materials quite successfully. Continued growth in production is expected in the medium term but questions on the sustainability of plastics are being raised. A key aspect of sustainability of plastics and rubber materials is their potential environmental toxicity and in particular human toxicity. Plastic resins, however, are nontoxic materials, composed of macromolecules that are neither digestible nor absorbable in the gut. Toxicity of plastics often observed is attributed to the numerous additives mixed in with the resin during processing and fabrication of products, the residual monomers, or catalysts trapped in the resin and the chemicals picked up by the plastics from the environment. Of these, the additives are present at the highest concentrations in plastic products. Knowing and evaluating the additives commonly used, their potential toxicity, and their intake routes to human users are essential for the sustainability of plastics.

Keywords

Colorants Fillers Flame retardants Lubricants Plasticizers Stabilizers 

References

  1. 1.
    Andrady AL, Neal MA (2009) Applications and societal benefits of plastics. Philos Trans R Soc Lond B Biol Sci 364:1977–1984CrossRefGoogle Scholar
  2. 2.
    Andrady AL (2015) Plastics and environmental sustainability. John Wiley and Sons, New YorkCrossRefGoogle Scholar
  3. 3.
    Freinkel S (2011) Plastics: a toxic love story. Houghton Mifflin Harcourt, New YorkGoogle Scholar
  4. 4.
    Research BCC (2014) Global market for plastics additives to reach US$60 billion by 2020. Addit Polym 5:11Google Scholar
  5. 5.
    Andrady AL (2011) Microplastics in the marine environment. Mar Pollut Bull 62(8):1596–1605CrossRefGoogle Scholar
  6. 6.
    Bošnir J, Puntarić D, Galić A, Škes I, Dijanić T, Klarić M, Grgic M, Curkovic M, Smit Z (2007) Migration of phthalates from plastic containers into soft drinks and mineral water. Food Technol Biotechnol 45(1):91–95Google Scholar
  7. 7.
    Guart A, Bono-Blay F, Borrell A, Lacorte S (2011) Migration of plasticizers phthalates, bisphenol A and alkylphenols from plastic containers and evaluation of risk. Food Addit Contam 28(5):1–10CrossRefGoogle Scholar
  8. 8.
    Coltro L, Pitta JB, da Costa PA, Perez F, MAVA d Aj, Rodrigues R (2014) Migration of conventional and new plasticizers from PVC films into food simulants: a comparative study. Food Control 44:118–129CrossRefGoogle Scholar
  9. 9.
    Ehlert KA, Beumer CWE, Groot MCE (2008) Migration of bisphenol A into water from polycarbonate baby bottles during microwave heating. Food Addit Contam Part A: Chem Anal. Control Expo Risk Assess 25:904–910CrossRefGoogle Scholar
  10. 10.
    Kershaw PJ, Joint Group of Experts on the Scientific Aspects of Marine Environmental Protection (2015) Sources, fate and effects of microplastics in the marine environment: a global assessment. Rep. Stud. GESAMP 90:96Google Scholar
  11. 11.
    (SCBD & STAP) Secretariat of the Convention on Biological Diversity and the Scientific and Technical Advisory Panel – GEF (2012) Impacts of marine debris on biodiversity: current status and potential solutions. Technical Series No. 67. Montreal, CanadaGoogle Scholar
  12. 12.
    Tanaka K, Takada H, Yamashita R, Mizukawa K, Fukuwaka M, Watanuki Y (2015) Facilitated leaching of additive-derived PBDEs from plastic by seabirds’ stomach oil and accumulation in tissues. Environ sci Technol 49:11799–11807. doi: 10.1021/acs.est.5b01376 CrossRefGoogle Scholar
  13. 13.
    Oehlmann J, Schulte-Oehlmann U, Kloas W, Jafnytsch O, Lutz I, Kusk KO, Wollenberger L, Santos EM, Paull GC, Van Look KJW, Tyler CR (2009) A critical analysis of the biological impacts of plasticizers on wildlife. Philos. Trans. Soc. B. 364:2047–2062CrossRefGoogle Scholar
  14. 14.
    Loyo-Rosales J,E, Rosales-Rivera G,C, Lynch AM, Rice CP, Torrents A (2004) Migration of nonylphenol from plastic containers to water and a milk surrogate. J. Agric. Food Chem. 52:2016–2020CrossRefGoogle Scholar
  15. 15.
    Halpin JC, Kardos JL (1976) The Halpin–Tsai equations: a review. Polym Eng Sci 16(5):344–352CrossRefGoogle Scholar
  16. 16.
    Yun YS, Bae YH, Kim DH, Lee JY, Chin I, Jin H (2011) Reinforcing effects of adding alkylated graphene oxide to polypropylene. Carbon 49(11):3553–3559CrossRefGoogle Scholar
  17. 17.
    Zhai W, Wang Y, Deng Y, Gao H, Lin Z, Li M (2014) Recycling of asbestos tailings used as reinforcing fillers in polypropylene based composites. J Hazard Mater 270:137–143CrossRefGoogle Scholar
  18. 18.
    Lee S, Yang H, Kim H, Jeong C, Lim B, Lee J (2004) Creep behavior and manufacturing parameters of wood flour filled polypropylene composites. Compos Struct 65(3-4):459–469CrossRefGoogle Scholar
  19. 19.
    Duifhuis PL, Janssen JMH (2001) Magnetite functional filler: a compounding study in polypropylene and polyamide. Plast Addit Compounding 3(11):14CrossRefGoogle Scholar
  20. 20.
    Rejón L, Rosas-Zavala A, Porcayo-Calderon V, Castaño VM (2000) Effect of silica on the electrical properties of epoxy of phenolic resin/carbon black/silica composite coating. Polym Eng Sci 40(9):2101CrossRefGoogle Scholar
  21. 21.
    Hornsby PR (1999) In: Jancar J (ed) Mineral fillers in thermoplastics i: raw materials and processing, advances in polymer science series, vol 139. Springer-Verlag, Berlin, Germany, p. 155CrossRefGoogle Scholar
  22. 22.
    Saiyad M, Devashrayee NM, Mevada RK (2014) Study the effect of dispersion of filler in polymer composite for radiation shielding. Polym Compos 35:1263–1266CrossRefGoogle Scholar
  23. 23.
    Illaik A, Vuillermoz C, Commereuc S, Taviot-Guého C, Verney V, Leroux F (2008) Reactive and functionalized LDH fillers for polymer. J Phys Chem Solids 69(5–6):1362–1366CrossRefGoogle Scholar
  24. 24.
    Xu T, Hou W, Shen X, Wu H, Li X, Wang J, Jiang Z (2011) Sulfonated titania submicrospheres-doped sulfonated poly(ether ether ketone) hybrid membranes with enhanced proton conductivity and reduced methanol permeability. J. Power Sources 196:4934CrossRefGoogle Scholar
  25. 25.
    Meeker JD, Sathyanarayana S, Swan SH (2009) Phthalates and other additives in plastics: human exposure and associated health outcomes. Philos Trans R Soc Lond B Biol Sci 364(1526):2097–2113CrossRefGoogle Scholar
  26. 26.
    Greco A, Brunetti D, Renna G, Mele G, Maffezzoli A (2010) Plasticizer for poly(vinyl chloride) from cardanol as a renewable resource material. Polym Degrad Stab 95(11):2069–2074CrossRefGoogle Scholar
  27. 27.
    Gächter R, Müller H (1993) Plastics additives handbook, 4th edn. Carl Hanser Verlag, MünchenGoogle Scholar
  28. 28.
    Versar Inc. Review of Exposure Data and Assessments for Select Dialkyl o-phthalates. (2010). Prepared for the US Consumer Protection Agency under Contract CPSC-D-06-0006Google Scholar
  29. 29.
    Wormuth M, Scheringer M, Vollenweider M, Hungerbuhler K (2006) What are the sources of exposure to eight frequently used phthalic acid esters in Europeans? Risk Anal. 26:803–824CrossRefGoogle Scholar
  30. 30.
    Hazardous Substances Data Bank (HSDB). 2009. Hazardous substances data bank query for Dibutyl Phthalate. National Library of Medicine’s TOXNET system. Available online at http://toxnet.nlm.nih.gov
  31. 31.
    European Chemicals Bureau (ECB) BBP. 2007. European Union Risk Assessment Report on Benzyl Butyl Phthalate (BBP). European Commission, Joint Research Centre, Institute of Health and Consumer Protection (IHCP), Toxicology and Chemical Substances (TCS), European Chemicals Bureau (ECB). Volume 76. EUR 22773 ENGoogle Scholar
  32. 32.
    Pedersen GA, Jensen L, Fankhauser A, Biedermann S, Petersen J, Fabech B (2008) Migration of epoxidized soybean oil (ESBO) and phthalates from twist closures into foodand enforcement of the overall migration limit. Food Addit Contam 25(4):503–510CrossRefGoogle Scholar
  33. 33.
    Hazardous Substances Data Bank (HSDB). Hazardous substances data bank query forDi(2-ethylhexyl)phthalate. National Library of Medicine’s TOXNET system. Available online at http://toxnet.nlm.nih.gov
  34. 34.
    Wittassek M, Wiesmuller GA, HM K, Eckard R, Dobler L, Muller J, Angerer J, Schluter C (2007) Internal phthalate exposure over the last two decades: a retrospective human biomonitoring study. Int. J. Hyg. Environ. Health 210:319–333CrossRefGoogle Scholar
  35. 35.
    Hauser R, Meeker JD, Singh NP, Silva MJ, Ryan L, Duty S, Calafat AM (2007) DNA damage in human sperm is related to urinary levels of phthalate monoester and oxidative metabolites. Hum Reprod 22(3):688–695CrossRefGoogle Scholar
  36. 36.
    Hauser R, Meeker JD, Duty S, Silva MJ, Calafat AM (2006) Altered semen quality in relation to urinary concentrations of phthalate monoester and oxidative metabolites. Epidemiology 17(6):682–691CrossRefGoogle Scholar
  37. 37.
    Whyatt RM, Liu X, Rauh VA, Calafat AM, Just AC, Hoepner L, Diaz D, Quinn J, Adibi J, Perera FP, Factor-Litvak P (2012) Maternal prenatal urinary phthalate metabolite concentrations and child mental, psychomotor, and behavioral development at 3 years of age. Environ Health Perspect 120(2):290–295CrossRefGoogle Scholar
  38. 38.
    Zota AR, Calafat AM, Woodruff TJ (2014) Temporal, Trends in Phthalate Exposures: findings from the national health and nutrition examination survey, 2001–2010. Environ Health Perspect 122(3):235–241Google Scholar
  39. 39.
    de Wit CA (2002) An overview of brominated flame retardants in the environment. Chemosphere 46:583–624CrossRefGoogle Scholar
  40. 40.
    Ceskaa Market Research. Global Flame Retardant Chemicals Market: 2015-2020. Report CHEM 15-01 Madison, NJ 07940.Google Scholar
  41. 41.
    USEPA (2009) Polybrominated Diphenyl Ethers (PBDEs) action plan summary. www.epa.gov/oppt/existingchemicals/pubs/actionplans/pbdes_ap_2009_1230_final.pdf
  42. 42.
    Li L, Xie S, Cai H, Bai X, Xue Z (2008) Quantitative structure–property relationships for octanol–water partition coefficients of polybrominated diphenyl ethers. Chemosphere 72:1602–1606CrossRefGoogle Scholar
  43. 43.
    Birnbaum LS, Staskal DF (2004) Brominated flame retardants: cause for concern? Environ Health Perspect 112(1):9–13CrossRefGoogle Scholar
  44. 44.
    Stasinska A, Heyworth J, Reid A, Callan A, Odland J, Duong PY, Ho QV, Hinwood A (2014) Polybrominated diphenyl ether (PBDE) concentrations in plasma of pregnant women from Western Australia. Sci Total Environ 493(15):554–561CrossRefGoogle Scholar
  45. 45.
    Ryan J, Dorothea K, Rawn FK (2014) The brominated flame retardants, PBDEs and HBCD, in Canadian human milk samples collected from 1992 to 2005; concentrations and trends. Environ Int 70:1–8CrossRefGoogle Scholar
  46. 46.
    Kiyama R, Wada-Kiyama Y (2015) Estrogenic endocrine disruptors: molecular mechanisms of action. Environ Int 83:11–40CrossRefGoogle Scholar
  47. 47.
    Myers JP, Zoeller RT, och vom Saal FSA (2009) Clash of old and new scientific concepts in toxicity, with important implications for public health. Environ Health Perspect 117(11):1652–1655CrossRefGoogle Scholar
  48. 48.
    Welshons WV, Thayer KA, Judy BM, Taylor JA, Curran EM, vom Saal FS (2003) Large effects from small exposures I. Mechanisms for endocrine-disrupting chemicals with estrogenic activity. Environ Health Perspect 111(8):994–1006CrossRefGoogle Scholar
  49. 49.
    Smith H (1999) Safety, health and environmental regulatory affairs for colorants used in the plastics industry. In: Harris RM (ed) Coloring technology for plastics. William Andrew Publishing, Norwich, NY, pp. 87–98CrossRefGoogle Scholar
  50. 50.
    Warheit DB, Brown SC, Donner EM (2015) Acute and subchronic oral toxicity studies in rats with nanoscale and pigment grade titanium dioxide particles. Food and Chem Toxicol 84:208–224CrossRefGoogle Scholar
  51. 51.
    Rhodes MC, Bucher JR, Peckham JC, Kissling GE, Hejtmancik MR, Chhabra RS (2007) Carcinogenesis studies of benzophenone in rats and mice. Food Chem Toxicol 45:843–851CrossRefGoogle Scholar
  52. 52.
    Hsieh MH, Grantham EC, Liu B, Macapagal R, Willingham E, LS B (2007) In utero exposure to benzophenone-2 causes hypospadias through an estrogen receptor dependent mechanism. J Urol 178:1637–1642CrossRefGoogle Scholar
  53. 53.
    Bejgarn S, MacLeod M, Bogdal C, Breitholtz M (2015) Toxicity of leachate from weathering plastics: an exploratory screening study with Nitocra spinipes. Chemosphere 132:114–119CrossRefGoogle Scholar
  54. 54.
    Ema M, Harazono A (2000) Adverse effects of dibutyltin dichloride on initiation and maintenance of rat pregnancy. Reprod Toxicol 14:451–456CrossRefGoogle Scholar
  55. 55.
    Boehme RM, Andries T, Dötz KH, Thiele B, Guenther K (2010) Synthesis of defined endocrine-disrupting nonylphenol isomers for biological and environmental studies. Chemosphere 80:813–821CrossRefGoogle Scholar
  56. 56.
    Bianco M, Mita L, Portaccio M, Diano N, Sica V, De Luca B, Mita DG, Romano C, Viggiano E (2011) Differential accumulation levels in the brain of rats exposed to the endocrine disruptor 4-tert-octylphenol (OP). Environ Toxicol Pharmacol 31:198–204CrossRefGoogle Scholar
  57. 57.
    Teuten EL et al. (2009) Transport and release of chemicals from plastics to the environment and to wildlife. Philos Trans R Soc B-Biol Sci 364:2027–2045CrossRefGoogle Scholar
  58. 58.
    Kwan CS, Takada H, Mizukawa K, Torii M, Koike T, Yamashita R, Rinawati SM, Santiago EC (2013) PBDEs in leachates from municipal solid waste dumping sites in tropical Asian countries: phase distribution and debromination. Environ Sci Pollut Res 20:4188–4204CrossRefGoogle Scholar
  59. 59.
    Froggett SJ, Clancy SF, Boverhof DR, Canady RA (2014) A review and perspective of existing research on the release of nanomaterials from solid nanocomposites. Fibre Toxicol 11:17CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG 2016

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 2.5 International License (http://creativecommons.org/licenses/by-nc/2.5/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Authors and Affiliations

  1. 1.Department of Chemical and Biomolecular EngineeringNorth Carolina State UniversityRaleighUSA
  2. 2.Appalachian State UniversityBooneUSA

Personalised recommendations