Advertisement

Food Containers and Packaging Materials as Possible Source of Hazardous Chemicals to Food

  • Evangelia Manoli
  • Dimitra Voutsa
Chapter
Part of the The Handbook of Environmental Chemistry book series (HEC, volume 78)

Abstract

Plastics are widely used around the world as packaging material covering a wide range of applications. Plastics could be a source of chemicals into food through migration of various compounds (polymers, monomers, and processing aids) from packaging to foodstuffs. The intentionally added substances (IAS) are listed and controlled by laws and regulations from various organisations. For these authorised substances, specific migration limits (SML) have been established on the basis of migration tests performed on the plastic material using different food simulants according to the food type. These tests are based on the risk assessment of the single substance able to migrate, simulating the worst case of the foreseeable conditions, in order to ensure the safety of the final material. However, over 50 % of compounds migrating from food contact materials are non-intentionally added substances (NIAS). The European Regulation No. 10/2011 concerning plastics and multilayers recently became more strict, stating that ‘the risk assessment of a substance should cover the substance itself, relevant impurities and foreseeable reaction and degradation products in the intended use’. This chapter presents the materials used in food containers and food packaging, the additives employed in different types of plastics in order to improve their properties, current legislation with emphasis on European Regulation No. 10/2011, and the migration tests and specific migration limits. In addition, there is discussion on the compounds usually found in various food categories and bottled water due to the presence of IAS or NIAS in packaging materials.

Keywords

Bottled water Food containers Food packaging materials Migration Plastics 

References

  1. 1.
    Muncke J (2009) Exposure to endocrine disrupting compounds via the food chain: is packaging a relevance source? Sci Total Environ 407:4549–4559CrossRefGoogle Scholar
  2. 2.
    Marsh K, Bugusu B (2007) Food packaging—roles, materials, and environmental issues. J Food Sci 72(3):R39–R55CrossRefGoogle Scholar
  3. 3.
    Mihindukulasuriya SDF, Lim T (2014) Nanotechnology development in food packaging: a review. Trends Food Sci Technol 40:149–167CrossRefGoogle Scholar
  4. 4.
    USEPA (2014) Plastics. http://www.epa.gov/wastes/conserve/materials/plastics.htm. (Last updated on 28 Feb 2014) Accessed 02 May 2015
  5. 5.
    Lau OW, Wong SK (2000) Review contamination in food from packaging material. J Chromatogr A 882:255–270CrossRefGoogle Scholar
  6. 6.
    Vangheluwe P (2015) Plastics Europe (Association of Plastics Manufacturers): Polyolefins (PO). http://www.plasticseurope.org/what-is-plastic/types-of-plastics-11148/polyolefins.aspx. Accessed 20 Feb 2015
  7. 7.
    Neal M (2015) Plastics Europe (Association of Plastics Manufacturers): Polyethylene teraphtalate (PET) http://www.plasticseurope.org/what-is-plastic/types-of-plastics-11148/polyethylene-teraphtalate.aspx. Accessed 20 Feb 2015
  8. 8.
    Mercea P (2009) Physicochemical processes involved in migration of bisphenol A from polycarbonate. J Appl Polym Sci 112:579–593CrossRefGoogle Scholar
  9. 9.
    Van Villige R et al. (2001) Influence of storage time and temperature on absorption of flavor compounds from solutions by plastic packaging materials. J Food Sci 67(6):2023–2031CrossRefGoogle Scholar
  10. 10.
    Sevenster A (2015) Plastics Europe (Association of Plastics Manufacturers): http://www.plasticseurope.org/what-is-plastic/types-of-plastics-11148/polyvinyl-chloride.aspx. Accessed 20 Feb 2015
  11. 11.
    Mokwena KK, Tang J (2012) Ethylene vinyl alcohol: a review of barrier properties for packaging shelf stable foods. Crit Rev Food Sci Nutr 52:640–650CrossRefGoogle Scholar
  12. 12.
    Singh P, Saengerlaub S, Wani AA, Langowski HC (2012) Role of plastics additives for food packaging. Pigm Resin Technol 41(6):368–379CrossRefGoogle Scholar
  13. 13.
    Fasano E, Bono-Blay F, Cirillo T, Montuori P, Lacorte S (2012) Migration of phthalates, alkylphenols, bisphenol A and di(2-ethylhexyl)adipate from food packaging. Food Control 27(1):132–138CrossRefGoogle Scholar
  14. 14.
    Goulas AE, Zygoura P, Karatapanis A, Georgantelis D, Kontominas M (2007) Migration of di(2-ethylhexyl) adipate and acetyltributyl citrate plasticizers from food-grade PVC film into sweetened sesame paste (halawatehineh): kinetic and penetration study. Food Chem Toxicol 45(4):585–591CrossRefGoogle Scholar
  15. 15.
    Khalil N, Chen A, Lee M (2014) Endocrine disruptive compounds and cardio-metabolic risk factors in children. Curr Opin Pharmacol 19:120–124CrossRefGoogle Scholar
  16. 16.
    Fankhauser-Noti A, Grob K (2006) Migration of plasticizers from PVC gaskets of lids for glass jars into oily foods: amount of gasket material in food contact, proportion of plasticizer migrating into food and compliance testing by simulation. Trends Food Sci Technol 17:105–112CrossRefGoogle Scholar
  17. 17.
    Bueno-Ferrer C et al. (2010) Characterization and thermal stability of poly(vinyl chloride) plasticized with epoxidized soybean oil for food packaging. Polym Degrad Stab 95:2207–2212CrossRefGoogle Scholar
  18. 18.
    Fankhauser-Noti A, Fiselier K, Biedermann-Brem S, Grob K (2006) Assessment of epoxidized soy bean oil (ESBO) migrating into foods: comparison with ESBO-like epoxy fatty acids in our normal diet. Food Chem Toxicol 44:1279–1286CrossRefGoogle Scholar
  19. 19.
    EU (2011) Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come in contact with food. Off J Eur Comm L12/1Google Scholar
  20. 20.
    Gomez-Estaca J et al. (2014) Advances in antioxidant active food packaging. Trends Food Sci Technol 35:42–51CrossRefGoogle Scholar
  21. 21.
    Markarian J (2007) Slip and antiblock additives: surface medication for film and sheet. Plast, Addit Compd 9(6):32–35CrossRefGoogle Scholar
  22. 22.
    Markarian J (2002) Additives in food packaging. Plast Addit Compd 4(4):16–21CrossRefGoogle Scholar
  23. 23.
    Wagner, C., 2013. Food Packaging Regulation in the US. Available at: http://www.foodpackagingforum.org/food-packaging-health/regulation-on-food-packaging/food-packaging-regulation-in-the-us. Accessed 20 Dec 2014
  24. 24.
    WHO-FAO(UN) (2013) Codex General Standard for Contaminants and Toxins in Food and Feed (CODEX STAN 193-1995). WHO, FAO (UN), pp 1–48. Available at: http://www.codexalimentarius.org/input/download/standards/17/CXS_193e2015.pdf. Accessed 20 Dec 2014
  25. 25.
    EU (2014) Directorate-General for Health and Consumers, 2014. Union Guidelines on Regulation (EU) No. 10/2011 on plastic materials and articles intended to come into contact with foodGoogle Scholar
  26. 26.
    Pocas MF, Hogg T (2009) Exposure assessment of chemicals from packaging materials. In Predictive modeling and risk assessment by R. Costa and K. Kristbergsson (eds), Springer New YorkGoogle Scholar
  27. 27.
    Yang CZ, Yaniger SI, Jirdan VC, Klein DJ, Bittner GD (2011) Most plastic products release estrogenic chemicals: A potential health problem that can be solved. Environ Health Perspect 119:989–996CrossRefGoogle Scholar
  28. 28.
    Goulas AE, Salpea E, Kontominas MG (2008) Di(2-ethylhexyl) adipate migration from PVC-cling film into packaged sea bream (Sparus aurata) and rainbow trout (Oncorhynchus mykiss) fillets: kinetic study and control of compliance with EU specifications. Eur Food Res Technol 226(4):915–923CrossRefGoogle Scholar
  29. 29.
    Inoue K, Kondo S, Yoshie Y, Kato K, Yoshimura Y, Horie M, Nakazawa H (2001) Migration of 4-nonylphenol from polyvinyl chloride food packaging films into food simulants and foods. Food Addit Contam 18:157–164CrossRefGoogle Scholar
  30. 30.
    Goulas AE, Anifantaki KI, Kolioulis DG, Kontominas MG (2000) Migration of di-(2-ethylhexylexyl)adipate plasticizer from food-grade polyvinyl chloride film into hard and soft cheeses. J Dairy Sci 83(8):1712–1718CrossRefGoogle Scholar
  31. 31.
    Cunha SC, Almeida C, Mendes E, Fernandes JO (2011) Simultaneous determination of bisphenol A and bisphenol B in beverages and powdered infant formula by dispersive liquid-liquid micro-extraction and heart-cutting multidimensional gas chromatography-mass spectrometry. Food Addit Contam Part A Chem Anal Control Expo Risk Assess 28(4):513–526CrossRefGoogle Scholar
  32. 32.
    Shao B, Han H, Hu JY, Zhao J, Wu GH, Xue Y, et al. (2005) Determination of alkylphenol and bisphenol A in beverages using liquid chromatography/electrospray ionization tandem mass spectrometry. Anal Chim Acta 530:245–252CrossRefGoogle Scholar
  33. 33.
    Cao XL, Corriveau J, Popovic S (2009) Levels of bisphenol A in canned soft drink products in Canadian markets. J Agric Food Chem 57:1307–1311CrossRefGoogle Scholar
  34. 34.
    Shao B, Han H, Tu X, Huang L (2007) Analysis of alkylphenol and bisphenol A in eggs and milk by matrix solid phase dispersion extraction and liquid chromatography with tandem mass spectrometry. J Chromatogr B Analyt Technol Biomed Life Sci 850(1–2):412–416CrossRefGoogle Scholar
  35. 35.
    Casajuana N, Lacorte S (2004) New methodology for the determination of phthalate esters, bisphenol A, bisphenol A diglycidyl ether, and nonylphenol in commercial whole milk samples. J Agric Food Chem 52(12):3702–3707CrossRefGoogle Scholar
  36. 36.
    Brenn-Struckhofova Z, Cichna-Markl M (2006) Determination of bisphenol A in wine by sol-gel immunoaffinity chromatography, HPLC and fluorescence detection. Food Addit Contam 23(11):1227–1235CrossRefGoogle Scholar
  37. 37.
    Chang CM, Chou CC, Lee MR (2005) Determining leaching of bisphenol A from plastic containers by solid-phase microextraction and gas chromatography–mass spectrometry. Anal Chim Acta 539:41–47CrossRefGoogle Scholar
  38. 38.
    Geens T, Apelbaum TZ, Goeyens L, Neels H, Covaci A (2010) Intake of bisphenol A from canned beverages and foods on the Belgian market. Food Addit Contam Part A: Chem Anal Control Expo Risk Assess 27(11):1627–1637CrossRefGoogle Scholar
  39. 39.
    Lu YY, Chen ML, Sung FC, Wang PSG, Mao IF (2007) Daily intake of 4-nonyl-phenol in Taiwanese. Environ Int 33:903–910CrossRefGoogle Scholar
  40. 40.
    Raecker T, Thiele B, Boehme RM, Guenther K (2011) Endocrine disrupting nonyl- and octylphenol in infant food in Germany: Considerable daily intake of nonylphenol for babies. Chemosphere 82:1533–1540CrossRefGoogle Scholar
  41. 41.
    Sǿrensen LK (2006) Determination of phthalates in milk and milk products by liquid chromatography/tandem mass spectrometry. Rapid Commun Mass Spectrom 20:1135–1143CrossRefGoogle Scholar
  42. 42.
    Genualdi S, Nyman P, Begley T (2014) Updated evaluation of the migration of styrene monomer and oligomers from polystyrene food contact materials to foods and food simulants. Food Addit Contam Part A 31:723–733CrossRefGoogle Scholar
  43. 43.
    Amiridou D, Voutsa D (2011) Alkylphenols and phthalates in bottled waters. J Hazard Mater 185:281–286CrossRefGoogle Scholar
  44. 44.
    Schmid P, Kohler M, Meierhofer R, Luzi S, Wegelin M (2008) Does the reuse of PET bottles during solar water disinfection pose a health risk due to the migration of plasticizers and other contaminants into water? Water Res 42:5054–5060CrossRefGoogle Scholar
  45. 45.
    Guart A, Calabuig I, Lacorte S, Borrell A (2014) Continental bottled water assessment by stir bar sorptive extraction followed by gas chromatography-tandem mass spectrometry (SBSE-GC-MS/MS). Environ Sci Pollut Res 21:2846–2855CrossRefGoogle Scholar
  46. 46.
    Casajuana N, Lacorte S (2003) Presence and release of phthalic esters and other endocrine disrupting compounds in drinking water. Chromatographia 57:649–655CrossRefGoogle Scholar
  47. 47.
    Colin A, Bach C, Rosin C, Munoz JF, Dauchy X (2014) Is drinking water a major route of human exposure to alkylphenol and bisphenol contaminants in France? Arch Environ Contam Toxicol 66:86–99CrossRefGoogle Scholar
  48. 48.
    Jeddi MZ, Rastkari N, Ahmadkhaniha R, Yunesian M (2015) Concentrations of phthalates in bottled water under common storage conditions: Do they pose a health risk to children? Food Res Int 69:256–265CrossRefGoogle Scholar
  49. 49.
    Maggioni S, Balaguer P, Chiozzotto C, Benfenati E (2013) Screening of endocrine-disrupting phenols, herbicides, steroid estrogens, and estrogenicity in drinking water from the waterworks of 35 Italian cities and from PET-bottled mineral water. Environ Sci Pollut Res 20:1649–1660CrossRefGoogle Scholar
  50. 50.
    Montuori P, Jover E, Morgantini M, Bayona JM, Triassi M (2008) Assessing human exposure to phthalic acid and phthalate esters from mineral water stored in polyethylene terephthalate and glass bottles. Food Addit Contam-Part A Chem, Anal, Control, Exposure Risk Assess 25(4):511–518CrossRefGoogle Scholar
  51. 51.
    Bošnir J, Puntarić D, Galić A, Škes I, Dijanić T, Klarić M, Grgić M, Čurković M, Šmit Z (2007) Migration of phthalates from plastic containers into soft drinks and mineral water. Food Technol Biotechnol 45(1):91–95Google Scholar
  52. 52.
    Li X, Ying GG, Su HC, Yang XC, Wang L (2010) Simultaneous determination and assessment of 4-nonylphenol, bisphenol A and triclosan in tap water, bottled water and baby bottles. Environ Int 36:557–562CrossRefGoogle Scholar
  53. 53.
    Guart A, Bono-Blay F, Borrell A, Lacorte S (2014) Effect of bottling and storage on the migration of plastic constituents in Spanish bottled waters. Food Chem 156:73–80CrossRefGoogle Scholar
  54. 54.
    Leivadara S, Nikolaou AD, Lekkas TD (2008) Determination of organic compounds in bottled waters. Food Chem 108:277–286CrossRefGoogle Scholar
  55. 55.
    Nawrocki J, Dabrowska A, Borcz A (2002) Investigation of carbonyl compounds in bottled waters from Poland. Water Res 36(19):4893–4901CrossRefGoogle Scholar
  56. 56.
    Dabrowska A, Borcz A, Nawrocki J (2003) Aldehyde contamination of mineral water stored in PET bottles. Food Addit Contam 20(12):1170–1177CrossRefGoogle Scholar
  57. 57.
    Wegelin M, Canonica S, Alder C, Marazuela D, Suter MJF, Bucheli TD, Haefliger OP, Zenobi R, McGuigan KG, Kelly MT, Ibrahim P, Larroque M (2001) Does sunlight change the material and content of polyethylene terephthalate (pet) bottles? J Water Supply: Res Technol-AQUA 50(3):125–133CrossRefGoogle Scholar
  58. 58.
    Bach C, Dauchy X, Severin I, Munoz JF, Etienne S, Chagnon MC (2013) Effect of temperature on the release of intentionally and non-intentionally added substances from polyethylene terephtalate (PET) bottles into water: chemical analysis and potential toxicity. Food Chem 139:672–680CrossRefGoogle Scholar
  59. 59.
    Andra SS, Makris KC, Shine JP, Lu C (2012) Leaching of brominated compounds and antimony from bottled water. Environ Int 38(1):45–53CrossRefGoogle Scholar
  60. 60.
    Westerhoff P, Prapaipong P, Shock E, Hillaireau A (2008) Antimony leaching from polyethylene terephtalate (PET) plastic used for bottled drinking water. Water Res 42(3):551–556CrossRefGoogle Scholar
  61. 61.
    Reimann C, Birke M, Filzmoser P (2010) Bottled drinking water: water contamination from bottle materials (glass hard PET, soft PET), the influence of colour and acidification. Appl Geochem 25(7):1030–1046CrossRefGoogle Scholar
  62. 62.
    Keresztes S, Tatár E, Mihucz VG, Virág I, Majdik C, Záray G (2009) Leaching of antimony from polyethylene terephthalate (PET) bottles into mineral water. Sci Total Environ 407(16):4731–4735CrossRefGoogle Scholar
  63. 63.
    Carneado SE, Hernandez-Nataren E, Lopez-Sanchez JF, Sahuquillo A (2015) Migration of antimony from polyethylene terephtalate used in mineral water bottles. Food Chem 166:544–550CrossRefGoogle Scholar
  64. 64.
    Geens T, Apelbaum TZ, Goeyens L, Neels H, Covaci A (2010) Intake of bisphenol A from canned beverages and foods on the Belgian market. Food Addit Contam 27:1627–1637CrossRefGoogle Scholar
  65. 65.
    Geens T, Goeyens L, Covaci A (2011) Are potential sources for human exposure to bisphenol-A overlooked? Int J Hyg Environ Health 214:339–347CrossRefGoogle Scholar
  66. 66.
    Piringer OG, Baner AL (2008) Plastic packaging. Interactions with food and pharmaceuticals. Wiley, WeinheimGoogle Scholar
  67. 67.
    Voutsa D (2014) Bisphenol A: analysis, sources and occurrence. In: Eliades T, Eliades G (eds) Plastics in dentistry and estrogenicity. Springer-Verlag, BerlinGoogle Scholar
  68. 68.
    EFSA (2006) Opinion of the scientific panel on food additives, flavourings, processing aids and materials in contact with food (AFC) on a request from the Commission related to 2,2-bis(4-hydroxyphenyl)-propane (bisphenol A). EFSA J 428:1–75Google Scholar
  69. 69.
    EPA (2009) Integrated risk information system. Environmental Protection Agency, Washington, DCGoogle Scholar
  70. 70.
    Dekant W, Völkel W (2008) Human exposure to bisphenol A by biomonitoring: methods, results and assessment of environmental exposures. Toxicol Appl Pharmacol 228:114–134CrossRefGoogle Scholar
  71. 71.
    Markey M, Michaelson CL, Sonnenschein C, Soto AM (2001) Alkylphenols and bisphenol A as environmental estrogens. In: Metzler M (ed) The handbook of environmental chemistry, vol 3, part I, Endocrine Distruptors, Part I. Springer-Verlag, BerlinGoogle Scholar
  72. 72.
    Kawamura Y, Koyama Y, Takeda Y, Yamada T (1998) Migration of bisphenol A from polycarbonate products. J Food Hyg Soc Jpn 99:206–212CrossRefGoogle Scholar
  73. 73.
    Guart A, Bono-Blay F, Borrell A, Lacorte S (2011) Migration of plasticizers phthalates, bisphenol A and alkylphenols from plastic containers and evaluation of risk. Food Addit Contam Part A 28(5):676–685CrossRefGoogle Scholar
  74. 74.
    Vandenberg LN, Hauser R, Marcus M, Olea N, Welshons WV (2007) Human exposure to bisphenol A (BPA). Reprod Toxicol 24:139–177CrossRefGoogle Scholar
  75. 75.
    Rudel RA, Gray JM, Engel CL, Rawsthorne TW, Dodson RE, Ackerman JM, Rizzo J, Nudelman JL, Brody JG (2011) Food packaging and bisphenol a and bis (2-ethykexyl) phthalate exposure: Findings from a dietary intervention. Environ Health Perspect 119:914–920CrossRefGoogle Scholar
  76. 76.
    Bach C, Dauchy X, Chagnon MC, Etienne S (2012) Chemical compounds and toxicological assessments of drinking water stored in polyethylene terephtalate (PET) bottles: a source of controversy reviewed. Water Res 46:571–583CrossRefGoogle Scholar
  77. 77.
    Le HH, Carlson EM, Chua JP, Belcher SM (2008) Bisphenol A is released from polycarbonate drinking bottles and mimics the neurotoxic actions of estrogen in developing cerebeller neurons. Toxicol Lett 176:149–156CrossRefGoogle Scholar
  78. 78.
    Makris K, Andra SS, Jia A, Herrick L, Christophi CA, Snyder SA, Hauser R (2013) Association between water consumption from polycarbonate containers and bisphenol A intake during harsh environmental conditions in summer. Environ Sci Technol 47(7):3333–3343CrossRefGoogle Scholar
  79. 79.
    EPA (2009) Summary of nominations for the third contaminant candidate list. U.S. Environmental Protection Agency. EPA-815-R-09-011. August 2009.Google Scholar
  80. 80.
    Kawamura Y, Maehara T, Yamada T (2000) Nonylphenol in food contact plastics and toys. J Food Hyg Soc Jpn 41:206–212CrossRefGoogle Scholar
  81. 81.
    Fernandes AR, Rose M, Charlton C (2008) 4-Nonylphenol (NP) in food contact materials: review, analytical methodology and occurrence. Food Addit Contam 25:364–372CrossRefGoogle Scholar
  82. 82.
    Loyo-Rosales JE, Rosales-Rivera G, Lynch AM, Rice CP, Torrents A (2004) Migration of nonylphenol from plastic containers to water and a milk surrogate. J Agric Food Chem 52:2016–2020CrossRefGoogle Scholar
  83. 83.
    Toyo’oka T, Oshige Y (2000) Determination of alkylphenols in mineral water contained in PET bottles by liquid chromatography with coulometric detection. Anal Sci 16:1071–1076CrossRefGoogle Scholar
  84. 84.
    Takada S (2013) International pellet watch. Studies of the magnitude and spatial variation of chemical risks associated with environmental plastics. In: Gabrys J, Hawkins G, Michael M (eds) Accumulation the material politics of plastics. CPI Group Ltd, Croydon, p. CR04YYGoogle Scholar
  85. 85.
    Guart A, Wagner M, Mezquida A, Lacorte S, Oehlmann J, Borell A (2013) Migration of plasticizers from Tritan™ and polycarbonate bottles and toxicological evaluation. Food Chem 141:373–380CrossRefGoogle Scholar
  86. 86.
    Erythropel HC, Maric M, Nicell JA, Leask RL, Yargeau V (2014) Leaching of the plasticizer di(2-ethylhexyl)phthalate (DEHP) from plastic containers and question of human exposure. Appl Microbiol Biotechnol 98:9967–9981CrossRefGoogle Scholar
  87. 87.
    Rodgers KM, Rudel RA, Just AC (2014) Phthalates in food packaging, consumer products, and indoor environments. In: Snedeker SM (ed) Toxicants in food packaging and household plastics, molecular and integrative toxicology. Springer-Verlag, LondonGoogle Scholar
  88. 88.
    Petersen JH, Jensen LK (2010) Phthalates and food-contact materials: enforcing the 2008 European Union Plastics Legislation. Food Addit Contam 27(11):1608–1616CrossRefGoogle Scholar
  89. 89.
    Harris CA, Sumpter JP (2001) The endocrine disrupting potential of phthalates. In: The Handbook of Environmental Chemistry, vol 3 Part L. Springer-Verlag, Berlin, pp. 169–200Google Scholar
  90. 90.
    Stanley MK, Robillard KA, Staples CA (2003) Introduction. In: The handbook of environmental chemistry, vol 3 Part Q. Springer-Verlag, Berlin, pp. 1–7Google Scholar
  91. 91.
    EPA (2012) Di(2-ethylhexyl)phthalate (DEHP) (CASRN 117-81-7). U.S. Environmental Protection Agency. Available from http://www.epa.gov/iris/subst/0014.htm
  92. 92.
    European Commission (2008) Commission Regulation No. 597/2008 amending Regulation No. 372/2007 laying down transitional migration limits for plasticizers in gaskets in lids intended to come into contact with foods. Off J Eur Union L 164 (25 June 2008), 51Google Scholar
  93. 93.
    European Commission (2007) (Corregendum to) Commission Directive 2007/19/EC amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with food and Council Directive 85/572/EEC laying down the list of simulants to be used for testing migration of constituents of plastic materials and articles intended to come into contact with foodstuffs. Off J Eur Union L 91 (31 March 2007)Google Scholar
  94. 94.
    WHO (2008) Guidelines for drinking water quality, 3rd edn. WHO, GenevaGoogle Scholar
  95. 95.
    EPA (2009) Drinking water contaminants. U.S. Environmental Protection Agency. EPA-816-F-09-011. August 2009.Google Scholar
  96. 96.
    Martine B, Marie-Jeanne T, Cendrine D, Fabrice A, Marc C (2013) Assessment of adult human exposure to phthalate esters in the urban centre of Paris (France). Environ Contam Toxicol 90:91–96CrossRefGoogle Scholar
  97. 97.
    Wormuth M, Scheringer M, Vollenweider M, Hungerbuhler K (2006) What arethe sources of exposure to eight frequently used phtalic acid esters in Europeans? Risk Anal 26:803–824CrossRefGoogle Scholar
  98. 98.
    González-Castro MI, Olea-Serrano MF, Rivas-Velasco AM, Medina-Rivero E, Ordoňez-Acevedo LG, De León-Rodriguez A (2011) Phthalates and bisphenols migration in Mexican food cans and plastic food containers. Bull Environ Contam Toxicol 86:627–631CrossRefGoogle Scholar
  99. 99.
    Criado MV, Fernandez Pinto VE, Badessari A, Cabral D (2005) Conditions that regulate the growth of moulds inoculated into bottled mineral water. Int J Food Microbiol 99:343–349CrossRefGoogle Scholar
  100. 100.
    Clark K, Cousins IT, Mackay D (2003) Assessment of critical exposure pathways. In: The handbook of environmental chemistry, vol 3 Part Q. Springer-Verlag, Berlin, pp. 227–262Google Scholar
  101. 101.
    Mutsuga M, Tojima T, Kawamura Y, Tanamoto K (2005) Survey of formaldehyde, acetaldehyde and oligomers in polyethylene terephthalate food-packaging materials. Food Addit Contam 22(8):783–789CrossRefGoogle Scholar
  102. 102.
    Bach C, Dauchy X, Chagnon MC, Etienne S (2011) Physico-chemical study of PET bottles and PET bottled water (in French). Matιriaux Tech 99:391–408CrossRefGoogle Scholar
  103. 103.
    Bach C, Dauchy X, Severin MJF, Etienne S, Chagnon MC (2014) Effect of sunlight exposure on the release of intentionally and/or non-intentionally added substances from polyethylene terephtalate (PET) bottles into water: chemical analysis and in vitro toxicity. Food Chem 162:63–71CrossRefGoogle Scholar
  104. 104.
    Genualdi S, Ntim SA, Begley T (2015) Suitability of polystyrene as a functional barrier layer in coloured food contact materials. Food Addit Contam Part A 32:395–402Google Scholar
  105. 105.
    EPA (2016) US Dept. HHS National Toxicology Program 2016. Report on Carcinogens, Fourteen Edition. Available at: https://ntp.niehs.nih.gov/ntp/roc/content/profiles/styrene.pdf. Accessed 20 Jan 2017
  106. 106.
    Duh B (2002) Effect of antimony catalyst on solid-state polycondensation of poly(ethylene terephthalate). Polymer 43:3147–3154CrossRefGoogle Scholar
  107. 107.
    Shotyk W, Krachler M (2007) Contamination of bottled waters with antimony leaching from polyethylene terephthalate (PET) increases upon storage. Environ Sci Technol 41(5):1560–1563CrossRefGoogle Scholar
  108. 108.
    Aghaee EM, Alimohammadi M, Nabizadeh R, Khaniki GJ, Naseri S, Mahvi AH, Yaghmaeian K, Aslani H, Nazmara S, Mahmoudi B, Ghani M (2014) Effects of storage time and temperature on the antimony and some trace element release from polyethylene terephthalate (PET) into the bottled drinking water. J Environ Health Sci Eng 12:133–138CrossRefGoogle Scholar
  109. 109.
    Andra SS, Makris KC, Shine JP (2011) Frequency of use controls chemical leaching from drinking water containers subject to disinfection. Water Res 45(20):6677–6687CrossRefGoogle Scholar
  110. 110.
    Makris KC, Andra SS, Herrick L, Christophi CA, Snyder SA, Hauser R (2013) Association of drinking water source and use characteristics with urinary antimony concentrations. J Exposure Sci Environ Epidemiol 23(2):120–127CrossRefGoogle Scholar
  111. 111.
    Shotyk W, Krachler M, Chen B (2006) Contamination of Canadian and European bottled waters with antimony leaching from PET containers. J Environ Monit 8:288–292Google Scholar

Copyright information

© Springer International Publishing AG 2016

Open Access This chapter is licensed under the terms of the Creative Commons Attribution-NonCommercial 2.5 International License (http://creativecommons.org/licenses/by-nc/2.5/), which permits any noncommercial use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Authors and Affiliations

  1. 1.Department of ChemistryAristotle University of ThessalonikiThessalonikiGreece

Personalised recommendations