Abstract
In this chapter, ductile mode cutting mechanism of brittle material is analysed theoretically and systematically. The coexisting crack propagation and dislocation extension in the chip formation zone are examined based on an analysis of cutting geometry and forces in the cutting zone, both on Taylor’s dislocation hardening theory and strain gradient plasticity theory. Ductile chip formation is a result of large compressive stress and shear stress in cutting zone, of which shields the growth of pre-existing flaws by enhancing material’s yield strength and suppressing its stress intensity factor KI. Large compressive stress in cutting zone is obtained by satisfying two conditions: (a) very small undeformed chip thickness, and (b) undeformed chip thickness being smaller than tool cutting edge radius. Experimental verification shows that thrust force Ft is much larger than cutting force Fc in cutting of brittle material, which indicates that a large compressive stress is generated in cutting zone to enhance material’s yield strength by dislocation hardening and strain gradient, and shields the growth of pre-existing flaws by suppressing its stress intensity factor KI. Thereafter, ductile mode cutting of brittle material is achieved when two conditions are satisfied, such that work material is able to undertake a large cutting stress in cutting zone without fracturing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Liu K (2002) Ductile cutting for rapid prototyping of tungsten carbide tools. NUS Ph.D. thesis, Singapore
Ngoi BKA, Sreejith PS (2000) Ductile regime finish machining – a review. Int J Adv Manuf Technol 16:547–550
Neo KW, Kumar AS, Rahman M (2012) A review on the current research trends in ductile regime machining. Int J Adv Manuf Technol 63:465–480
Antwi EK, Liu K, Wang H (2018) A review on ductile mode cutting of brittle materials. Front Mech Eng 13:251–263
Hahn GT, Reid CN, Gilbert A (1963) The dislocation dynamics of plastic flow. In: Proceedings of the international production engineering research conference, Pittsburgh, USA, pp. 293–301
Rice JR, Thomsom R (1974) Ductile versus brittle behaviour of crystals. Philos Mag 29:73–97
Michot G, de Oliveira MAL, Champier G (1999) A model of dislocation multiplication at a crack tip influencing on the brittle to ductile transition. Mater Sci Eng A 272:83–89
Hartmaier A, Gumbsch P (1999) The brittle-to-ductile transition and dislocation activity at crack tips. J Comput-Aided Mater Des 6:145–155
Thomsom RM, Sinclair JE (1982) Mechanics of cracks screened by dislocation. Acta Metall 30:1325–1334
Ohr SM (1985) An electron microscope study of crack tip deformation and its impact on the dislocation theory of fracture. Mater Sci Eng 72:1–35
Ferney BD, Hsia KJ (1999) The influence of multiple slip systems on the brittle-ductile transition in silicon. Mater Sci Eng A 272:422–430
Samuels J, Roberts SG, Hirsch PB (1988) The brittle-to-ductile transition in silicon. Mater Sci Eng A 105(106):39–46
Ebrahimi F, Shrivastava S (1997) Crack initiation and propagation in brittle-to-ductile transition regime of NiAl single crystals. Mater Sci Eng A 239–240:386–392
Imayev VM, Imayev RM, Salishchev GA (2000) On two stages of brittle-to-ductile transition in TiAl intermetallic. Intermet 8:1–6
Chen W, Ravichandran G (2000) Failure mode transition in ceramics under dynamic multiaxial compression. Int J Fract 101:141–159
Blackley WS, Scattergood RO (1994) Chip topography for ductile-regime machining of germanium. ASME Trans J Eng Ind 116:263–266
Liu K, Li XP (2001) Modelling of ductile cutting of tungsten carbide. Trans NAMRI/SME 29:251–258
Liu K, Li XP (2001) Ductile cutting of tungsten carbide. J Mater Process Technol 113:348–354
Broek D (1984) Elementary engineering fracture mechanics. Martinus Nijihoff Publishers, Springer, Netherlands, The Hague
Ewalds HL, Wanhill RJH (1989) Fracture mechanics. Edward Arnold, London
Jayatilaka A de S (1979) Fracture of engineering brittle materials. Appl Sci Lond:19–115
Meyers MA (1994) Dynamic behaviour of materials. Wiley, New York, pp 488–566
Irwin GR (1957) Analysis of stress and strain near the end of a crack traversing a plate. ASME Trans J Appl Mech 24:361–364
Kendall K (1976) Interfacial cracking of a composite. J Mater Sci 11:1267–1269
Pisarenko GS, Krasowsky AY, Vainshtock VA et al (1987) The combined micro- and macro-fracture mechanics approach to engineering problems of strength. Eng Fract Mech 28:539–554
Weertman J (1978) Fracture mechanics: a unified view for Griffith-Irwin-Orowan cracks. Acta Metall 26:1731–1738
Pook LP (1985) The fatigue crack direction and threshold behavior of mild steel under mixed mode I and III loading. Int J Fatigue 7:21–30
Topper TH, Yu MT (1985) The effect of overloads on threshold and crack closure. Int J Fatigue 7:159–164
Strenkowski JS, Hiatt GD (1990) A technique for predicting the ductile regime in single point diamond turning of brittle materials. Fundam Issues Mach: Am Soc Mech Eng 43:67–80
Smith A, Nurse A, Graham G et al (1996) Ultrasonic cutting – a fracture mechanics model. Ultrasonics 34:197–203
Liu K, Li XP, Liang SY (2007) The mechanism of ductile chip formation in cutting of brittle materials. Int J Adv Manuf Technol 33:875–884
Cottrell AH (1953) Dislocations and plastic flow in crystals. The Clarendon Press, Oxford University
Kovacs I, Zsoldos L (1973) Dislocations and plastic deformation. Pergamon Press, Oxford, pp 252–283
Fleck NA, Hutchinson JW (1997) Strain gradient plasticity. In: Hutchinson JW, Wu TY (eds) Advances in applied mechanics, vol 33. Academic Press, New York, pp 295–236
Gao H, Huang Y, Nix WD et al (1999) Mechanism-based strain gradient plasticity – I. Theory. J Mech Phys Solids 47:1239–1263
Huang Y, Gao H, Nix WD et al (2000) Mechanism-based strain gradient plasticity – II Analysis. J Mech Phys Solids 48:99–128
Shi MX, Huang Y, Hwang KC (2000) Plastic flow localization in mechanism-based strain gradient plasticity. Int J Mech Sci 42:2115–2131
Bifano T, Bierden PA (1997) Fixed-abrasive grinding of brittle hard disk substrates. Int J Mach Tools Manuf 37:935–946
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Liu, K., Wang, H., Zhang, X. (2020). Ductile Mode Cutting Mechanism. In: Ductile Mode Cutting of Brittle Materials. Springer Series in Advanced Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-32-9836-1_2
Download citation
DOI: https://doi.org/10.1007/978-981-32-9836-1_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9835-4
Online ISBN: 978-981-32-9836-1
eBook Packages: EngineeringEngineering (R0)