Abstract
In recent times, bio-based hyperbranched polymers have attracted tremendous interest in industrial and scientific research, owing to their promising and unique attributes over their synthetic conventional analogs. Industrially important bio-based hyperbranched polymers such as polyurethane, polyester, poly(ester-amide), and epoxy have been developed over the last two decades from Advanced Polymer and Nanomaterial Laboratory of Tezpur University. They are synthesized by the Ax + By (x, y ≥ 2) approach with or without solvent, following the dictates of “Green Chemistry.” Again, it is a well-known fact that “virginity is not virtue” in case of polymers and the conventional filled composite systems are inappropriate to improve the performance of such bio-based polymers and hence unable to meet the service demands of advanced applications. Thus, nanotechnology, in recent times, is adopted to develop a variety of nanocomposites of the above sustainable polymers with different types of nanomaterials. The developed nanocomposites showed significant improvement of desired properties including mechanical, thermal, chemical, biological, optical, etc., along with special properties like shape memory, self-healing, self-cleaning, biocompatibility, etc. A brief overview of such sustainable materials including their applications from advanced air cleaning paints to injectable bone tissue scaffold including smart materials is discussed in this chapter.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gogoi S, Kumar M, Mandal BB, Karak N (2015) High performance luminescent thermosetting waterborne hyperbranched polyurethane/carbon quantum dot nanocomposite with in vitro cytocompatibility. Compos Sci Technol 118:39–46. https://doi.org/10.1016/j.compscitech.2015.08.010
Gogoi S, Maji D, Mishra S, Devi Maity T, Karak N (2017) Nano-bio engineered carbon dot-peptide functionalized water dispersible hyperbranched polyurethane for bone tissue regeneration. Macromol Biosci 17:1–15. https://doi.org/10.1002/mabi.201600271
Bayan R, Karak N (2017) Renewable resource modified polyol derived aliphatic hyperbranched polyurethane as a biodegradable and UV-resistant smart material. Polym Int 66:839–850. https://doi.org/10.1002/pi.5323
Ghosh T, Karak N (2018) Biobased multifunctional macroglycol containing smart thermoplastic hyperbranched polyurethane elastomer with intrinsic self-healing attribute. ACS Sustain Chem Eng 6:4370–4381. https://doi.org/10.1021/acssuschemeng.8b00001
Dutta GK, Karak N (2018) One-pot synthesis of bio-based waterborne polyester as UV-resistant biodegradable sustainable material with controlled release attributes. ACS Omega 3:16812–16822. https://doi.org/10.1021/acsomega.8b02790
Hazarika D, Karak N (2015) Waterborne sustainable tough hyperbranched aliphatic polyester thermosets. ACS Sustain Chem Eng 3:2458–2468. https://doi.org/10.1021/acssuschemeng.5b00494
Konwar U, Karak N, Jana T (2012) Vegetable oil-based highly branched polyester modified epoxy based low VOC high solid industrial paint. J Appl Polym Sci 125:E2–E9. https://doi.org/10.1002/app.35370
Barua S, Dutta G, Karak N (2013) Glycerol based tough hyperbranched epoxy: synthesis, statistical optimization and property evaluation. Chem Eng Sci 95:138–147. https://doi.org/10.1016/j.ces.2013.03.026
Thakur S, Barua S, Karak N (2015) Self-healable castor oil based tough smart hyperbranched polyurethane nanocomposite with antimicrobial attribute. RSC Adv 5:2167–2176. https://doi.org/10.1039/C4RA11730A
Noordover AJB, Duchateau R, Benthem ATM, Ming W, Koning E (2007) Enhancing the functionality of biobased polyester coating resins through modification with citric acid. Biomacromol 8:3860–3870. https://doi.org/10.1021/bm700775e
Ghosh S, Goswami SK, Mathias LJ (2013) Surface modification of nano-silica with amides and imides for use in polyester nanocomposites. J Mater Chem A 1:6073–6080. https://doi.org/10.1039/C3TA10381A
Yadav SK, Cho JW (2013) Functionalized graphene nanoplatelets for enhanced mechanical and thermal properties of polyurethane nanocomposites. Appl Surf Sci 266:360–367. https://doi.org/10.1016/j.apsusc.2012.12.028
Gaminian H, Montazer M (2015) Enhanced self-cleaning properties on polyester fabric under visible light through single-step synthesis of cuprous oxide doped nano-TiO2. Photochem Photobiol 91:1078–1087. https://doi.org/10.1111/php.12478
Szycher M (2013) Szycher’s handbook of polyurethanes. CRC Press, Boca Raton, p 2012
Duarah R, Singh YP, Mandal BB, Karak N (2016) Sustainable starch modified polyol based tough, biocompatible, hyperbranched polyurethane with a shape memory attribute. New J Chem 40:5152–5163. https://doi.org/10.1039/C5NJ03294F
Akindoyo JO, Beg MDH, Ghazali S, Islam MR, Jeyaratnam N, Yuvaraj AR (2016) Polyurethane types, synthesis and applications—a review. RSC Adv 6:114453–114482. https://doi.org/10.1039/c6ra14525f
Hepburn C (1992) Polyurethane elastomers. Springer, Netherlands
Petrovic ZS, Ferguson J (1991) Polyurethane elastomers. Prog Polym Sci 16:695–836. https://doi.org/10.1016/0079-6700(91)90011-9
Zhou H, Wang H, Niu H, Lin T (2018) Recent progress in durable and self-healing super-nonwettable fabrics. Adv Mater Interfaces 5:1800461. https://doi.org/10.1002/admi.201800461
Noreen A, Zia KM, Zuber M, Tabasum S, Zahoor AF (2016) Bio-based polyurethane: an efficient and environment friendly coating systems: a review. Prog Org Coat 91:25–32. https://doi.org/10.1016/J.PORGCOAT.2015.11.018
Pfister DP, Xia Y, Larock RC (2011) Recent advances in vegetable oil-based polyurethanes. ChemSusChem 4:703–717. https://doi.org/10.1002/cssc.201000378
Petrovic ZS (2008) Polymer reviews polyurethanes from vegetable oils polyurethanes from vegetable oils. Polym Rev 48:109–155. https://doi.org/10.1080/15583720701834224
Karak N (2017) Biobased smart polyurethane nanocomposites: from synthesis to applications. Royal Society of Chemistry, Cambridge
Sharmin E, Zafar F Polyurethane: an introduction, polyurethane, Intech Open. https://doi.org/10.5772/51663
Chang W, Karalis T (1993) Polyesterification reactions of adipic acid based polyesters. J Polym Sci A 2:493–504. https://doi.org/10.1002/pola.1993.080310221
Malshe VC, Sikchi M (2004) Basics of paint technology, Part I, Prakash C. Malshe, Mumbai, 1st edn
Jasinska L, Koning CE (2010) Unsaturated, biobased polyesters and their crosslinking via radical copolymerization. J Polym Sci A 48:2885–2895. https://doi.org/10.1002/pola.24067
Konwar U, Karak N (2011) Epoxy modified Mesua ferrea L. seed oil based polyester/clay nanocomposites. Int J Polym Mater 60:799–816. https://doi.org/10.1080/00914037.2010.551366
Brunelle DJ, Shannon TG (1991) Preparation and polymerization of bisphenol A cyclic oligomeric carbonates. Macromolecules 24:3035–3044. https://doi.org/10.1021/ma00011a002
Denham H, Vaughan WE (1951) Sulfurized product and preparation thereof. US Patent 2,536,684, issued Jan 2
Shachi K, Ishiura K (2002) Resin composition and usage thereof. US Patent 6,410,109, issued June 25
Anastas P, Eghbali N (2010) Green chemistry: principles and practice. Chem Soc Rev 39:301–312. https://doi.org/10.1039/B918763B
Saikia A, Karak N (2017) Renewable resource based thermostable tough hyperbranched epoxy thermosets as sustainable materials. Polym Degrad Stab 135:8–17. https://doi.org/10.1016/j.polymdegradstab.2016.11.014
Duarah R, Karak N (2015) A starch based sustainable tough hyperbranched epoxy thermoset. RSC Adv 5:64456–64465. https://doi.org/10.1039/C5RA09955B
Guo Z, Pereira T, Choi O, Wang Y, Hahn HT (2006) Surface functionalized alumina nanoparticle filled polymeric nanocomposites with enhanced mechanical properties. J Mater Chem 16:2800–2808. https://doi.org/10.1039/B603020C
Jordan R, West N, Ulman A, Chou YM, Nuyken O (2001) Nanocomposites by surface-initiated living cationic polymerization of 2-oxazolines on functionalized gold nanoparticles. Macromolecules 34:1606–1611. https://doi.org/10.1021/ma001615j
Sabatier P (1986) Top-down and bottom-up approaches to implementation research: a critical analysis and suggested synthesis. J Public Pol 6:21. https://doi.org/10.1017/S0143814X00003846
Sekunowo OI, Durowaye SI, Lawal GI (2015) An overview of nano-particles effect onmechanical properties of composites. Int J Mech Aero Ind Mech Manuf Eng 9:1–7
Sudha PN, Sangeetha K, Vijayalakshmi K, Barhoum A (2018) Nanomaterials history, classification, unique properties, production and market, emerging applications of nanoparticles and architectural nanostructures: current prospects and future trends. Elsevier Inc., pp 341–384
Lee C, Wei X, Kyser JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321:385–388. https://doi.org/10.1126/science.1157996
Wang X, Li Q, Xie J, Jin Z, Wang J, Li Y, Jiang K, Fan S (2009) Fabrication of ultralong and electrically uniform single-walled carbon nanotubes on clean substrates. Nano Lett 9:3137–3141. https://doi.org/10.1021/nl901260b
Wang Y, Hu A (2014) Carbon quantum dots: synthesis, properties and applications. J Mater Chem C 2:6921–6939. https://doi.org/10.1039/C4TC00988F
Bora C, Gogoi P, Baglari S, Dolui SK (2013) Preparation of polyester resin/graphene oxide nanocomposite with improved mechanical strength. J Appl Polym Sci 129:3432–3438. https://doi.org/10.1002/app.39068
Hazarika D, Gupta K, Mandal M, Karak N (2018) High-performing biodegradable waterborne polyester/functionalized graphene oxide nanocomposites as an eco-friendly material. ACS Omega 3:2292–2303. https://doi.org/10.1021/acsomega.7b01551
Naebe M, Wang J, Amini A, Khayyam H, Hameed N, Li LH, Chen Y, Fox B (2014) Mechanical property and structure of covalent functionalised graphene/epoxy nanocomposites. Sci Rep 4:4375. https://doi.org/10.1038/srep04375
Rao CNR, Vivekchand SRC, Biswas K, Govindaraj A (2007) Synthesis of inorganic nanomaterials. Dalton Trans 34:3728–3749. https://doi.org/10.1039/B708342D
Petrovic ZS, Javni I, Waddon A, Banhegyi G (2000) Structure and properties of polyurethane-silica nanocomposites. J Appl Polym Sci 76:133–151. https://doi.org/10.1002/(SICI)1097
Wu CS, Liao HT (2011) Antibacterial activity and antistatic composite of polyester/Ag–SiO2 prepared by a sol-gel method. J Appl Polym Sci 121:2193–2201. https://doi.org/10.1002/app.33823
Zhao Y, Wang F, Fu Q, Shi W (2007) Synthesis and characterization of ZnS/hyperbranched polyester nanocomposite and its optical properties. Polymer 48:2853–2859. https://doi.org/10.1016/j.polymer.2007.03.054
Ray SS, Okamoto M (2003) Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28:1539–1641. https://doi.org/10.1016/j.progpolymsci.2003.08.002
Kong D, Park CE (2003) Real time exfoliation behavior of clay layers in epoxy-clay nanocomposites. Chem Mater 15:419–424. https://doi.org/10.1021/cm0205837
Sanchez C, Belleville P, Popall M, Nicole L (2011) Applications of advanced hybrid organic-inorganic nanomaterials: From laboratory to market. Chem Soc Rev 40:696–753. https://doi.org/10.1039/C0CS00136H
Andresen M, Stenstad P, Moretro T, Langsrud S, Syverud K, Johansson LS, Stenius P (2007) Nonleaching antimicrobial films prepared from surface-modified microfibrillated cellulose. Biomacromol 8:2149–2155. https://doi.org/10.1021/bm070304e
Hazarika D, Karak N (2018) Unprecedented influence of carbon dot@TiO2 nanohybrid on multifaceted attributes of waterborne hyperbranched polyester nanocomposite. ACS Omega 3:1757–1769. https://doi.org/10.1021/acsomega.7b02079
Bernal MM, Martin-Gallego M, Molenberg I, Huynen I, Manchado MAL, Verdejo R (2014) Influence of carbon nanoparticles on the polymerization and EMI shielding properties of PU nanocomposite foams. RSC Adv 4:7911–7918. https://doi.org/10.1039/C3RA45607B
Koo J (2006) Polymer nanocomposites: processing, characterization, and applications. McGraw Hill Professional, New York
Chen Z, Lu H (2012) Constructing sacrificial bonds and hidden lengths for ductile graphene/polyurethane elastomers with improved strength and toughness. J Mater Chem 22:12479–12490. https://doi.org/10.1039/C2JM30517H
Wu C, Huang X, Wang G, Wu X, Yang K, Li S, Jiang P (2012) Hyperbranched-polymer functionalization of graphene sheets for enhanced mechanical and dielectric properties of polyurethane composites. J Mater Chem 22:7010–7019. https://doi.org/10.1039/C2JM16901K
Konwar U, Mandal M, Karak N, Mesua ferrea L (2011) Seed oil based acrylate-modified thermostable and biodegradable highly branched polyester resin/clay nanocomposites. Prog Org Coat 72:676–685. https://doi.org/10.1016/j.porgcoat.2011.07.010
Decker JJ, Chvalun SN, Nazarenko S (2011) Intercalation behavior of hydroxylated dendritic polyesters in polymer clay nanocomposites prepared from aqueous solution. Polymer 52:3943–3955. https://doi.org/10.1016/j.polymer.2011.07.008
Hazarika D, Karak N (2016) Biodegradable tough waterborne hyperbranched polyester/carbon dot nanocomposite: approach towards an eco-friendly material. Green Chem 18:5200–5211. https://doi.org/10.1039/C6GC01198E
Duarah R, Singh YP, Gupta P, Mandal BB, Karak N (2016) High performance bio-based hyperbranched polyurethane/carbon dot-silver nanocomposite: a rapid self-expandable stent. Biofabrication 8:045013. https://doi.org/10.1088/1758-5090/8/4/045013
Wang X, Hu Y, Song L, Yang H, Xing W, Lu H (2011) In situ polymerization of graphene nanosheets and polyurethane with enhanced mechanical and thermal properties. J Mater Chem 21:4222–4227. https://doi.org/10.1039/C0JM03710A
Gao H, Liu L, Luo YF, Jia D (2011) In situ preparation of epoxy/silver nanocomposites by thermal decomposition of silver-imidazole complex. Material Lett 65:3529–3532. https://doi.org/10.1016/j.matlet.2011.07.086
Karak N (2016) Experimental methods on polymers, nanomaterials and their nanocomposites. Nova Science Publishers, New York
Chun B, Cho TK, Chong MH, Chung YC, Chen J, Martin D, Cieslinski RC (2007) Mechanical properties of polyurethane/montmorillonite nanocomposite prepared by melt mixing. J Appl Polym Sci 106:712–721. https://doi.org/10.1002/app.26721
Lee SR, Park HM, Kang T, Li X, Cho WJ, Ha CS (2002) Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites. Polymer 43:2495–2500. https://doi.org/10.1016/S0032-3861(02)00012-5
Kim JY, Han SI, Hong S (2008) Effect of modified carbon nanotubes on the properties of aromatic polyester nanocomposites. Polymer 49:3335–3345. https://doi.org/10.1016/j.polymer.2008.05.024
De B, Kumar M, Mandal BB, Karak N (2015) An in situ prepared photo-luminescent transparent biocompatible hyperbranched epoxy/carbon dot nanocomposite. RSC Adv 5:74692–74704
Sudirman, Anggaravidya M, Budiantoa E, Gunawanb I (2012) Synthesis and characterization of polyester-based nanocomposite. Procedia Chem 4:107–113. https://doi.org/10.1016/j.proche.2012.06.016
Fu JF, Shi LY, Yuan S, Zhong QD, Zhang DS, Chen Y, Wu J (2008) Morphology, toughness mechanism, and thermal properties of hyperbranched epoxy modified diglycidyl ether of bisphenol A (DGEBA) interpenetrating polymer networks. Polym Adv Technol 19:1597–1607. https://doi.org/10.1002/pat.1175
Scognamillo S, Gioffredi E, Piccinini M, Lazzari M, Alzari V, Nuvoli D, Sanna R, Piga D, Malucelli G, Mariani A (2012) Synthesis and characterization of nanocomposites of thermoplastic polyurethane with both graphene and graphene nanoribbon fillers. Polymer 53:4019–4024. https://doi.org/10.1016/j.polymer.2012.07.020
Hong RY, Li JH, Chen LL, Liu DQ, Li HZ, Zheng Y, Ding J (2009) Synthesis, surface modification and photocatalytic property of ZnO nanoparticles. Powder Technol 189:426–432. https://doi.org/10.1016/j.powtec.2008.07.004
Duarah R, Karak N (2017) Facile and ultrafast green approach to synthesize biobased luminescent reduced carbon nanodot: an efficient photocatalyst. ACS Sustain Chem Eng 5:9454–9466. https://doi.org/10.1021/acssuschemeng.7b02590
Du Y, Yan H, Huang W, Chai F, Niu S (2017) Unanticipated strong blue photoluminescence from fully bio-based aliphatic hyperbranched polyesters. ACS Sustain Chem Eng 5:6139–6147. https://doi.org/10.1021/acssuschemeng.7b01019
Jena KK, Narayan R, Raju KV (2012) Investigation of the effect of ZnO nanoparticles on the thermomechanical and microbial properties of hyperbranched polyurethane-urea hybrid composites. Polym Int 61:1309–1317. https://doi.org/10.1002/pi.4209
Yadav SK, Mahapatra SS, Cho JW (2012) Synthesis of mechanically robust antimicrobial nanocomposites by click coupling of hyperbranched polyurethane and carbon nanotubes. Polymer 53:2023–2031. https://doi.org/10.1016/j.polymer.2012.03.010
Barua S, Chattopadhyay P, Phukan MM, Konwar BK, Islam J, Karak N (2014) Biocompatible hyperbranched epoxy/silver-reduced graphene oxide-curcumin nanocomposite as an advanced antimicrobial material. RSC Adv 4:47797–47805. https://doi.org/10.1039/C4RA07802K
Guo Z, Park S, Hahn HT, Wei S, Moldovan M, Karki AB, Young DP (2007) Magnetic and electromagnetic evaluation of the magnetic nanoparticle filled polyurethane nanocomposites. J Appl Phys 101:09M511. https://doi.org/10.1063/1.2711074
Kalita H, Mandal M, Karak N (2012) Biodegradable solvent-induced shape-memory hyperbranched polyurethane. J Polym Res 19:9982. https://doi.org/10.1007/s10965-012-9982-6
Lee HF, Yu HH (2011) Study of electroactive shape memory polyurethane-carbon nanotube hybrids. Soft Matter 7:3801–3807. https://doi.org/10.1039/c0sm01101k
Tang Z, Kang H, Wei Q, Guo B, Zhang L, Jia D (2013) Incorporation of graphene into polyester/carbon nanofibers composites for better multi-stimuli responsive shape memory performances. Carbon 64:487–498. https://doi.org/10.1016/j.carbon.2013.07.103
Rousseau IA, Xie T (2009) Shape memory epoxy: composition, structure, properties and shape memory performances. J Mater Chem 20:3431–3441. https://doi.org/10.1039/b923394f
Schmaljohann D, Voit BI, Jansen JFGA, Hendriks P, Loontjens JA (2000) New coating systems based on vinyl ether- and oxetane-modified hyperbranched polyesters. Macromol Mater Eng 275:31–41
Kunduru KR, Basu A, Zada MH, Domb AJ (2015) Castor oil-based biodegradable polyesters. Biomacromol 16:2572–2587. https://doi.org/10.1021/acs.biomac.5b00923
Selim MS, Shenashen MA, Elmarakbi A, El-Saeed AM, Selim MM, El-Safty SA (2017) Sunflower oil-based hyperbranched alkyd/spherical ZnO nanocomposite modeling for mechanical and anticorrosive applications. RSC Adv 7:21796–21808. https://doi.org/10.1039/c7ra01343d
Song HJ, Zhang ZZ, Men XH (2007) Surface-modified carbon nanotubes and the effect of their addition on the tribological behavior of a polyurethane coating. Eur Polym J 43:4092–4102. https://doi.org/10.1016/j.eurpolymj.2007.07.003
Li JH, Hong RY, Li MY, Li HZ, Zheng Y, Ding J (2009) Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings. Prog Org Coat 64:504–509. https://doi.org/10.1016/j.porgcoat.2008.08.013
Gnidakouong JR, Kim M, Park HW, Park YB, Jeong HS, Jung YB, Ahn SK, Han K, Park JM (2013) Electromagnetic interference shielding of composites consisting of a polyester matrix and carbon nanotube-coated fiber reinforcement. Compos Part A 50:73–80. https://doi.org/10.1016/j.compositesa.2013.03.007
Seng LY, Wee FH, Rahim HA, Malek F, You KY, Liyana Z, Jamlos MA, Ezanuddin AAM (2018) EMI shielding based on MWCNTs/polyester composites. Appl Phys A Mater 124:140. https://doi.org/10.1007/s00339-018-1564-y
Tang Z, Sun D, Yang D et al (2013) Vapor grown carbon nanofiber reinforced bio-based polyester for electroactive shape memory performance. Compos Sci Technol 75:15–21. https://doi.org/10.1016/j.compscitech.2012.11.019
Huang JH, Song Y, Chen XX, Zhang XS, Miao LM, Chen HT, Zhang HX (2017) Flexible fabric-based wearable solid-state supercapacitor. In: 2017 IEEE 12th international conference on nano/micro engineered and molecular systems (NEMS). Los Angeles, CA, pp 169–172
Raja M, Ryu SH, Shanmugharaj AM (2014) Influence of surface modified multiwalled carbon nanotubes on the mechanical and electroactive shape memory properties of polyurethane (PU)/poly(vinylidene diflouride)(PVDF) composites. Colloids Surf A 450:59–66. https://doi.org/10.1016/j.colsurfa.2014.03.008
Nayak S, Sahoo B, Chaki TK, Khastgir D (2013) Development of polyurethane-titania nanocomposites as dielectric and piezoelectric material. RSC Adv 3:2620–2631. https://doi.org/10.1039/c2ra22929c
Srivastava SK, Singh IP (2012) Hybrid epoxy nanocomposites: lightweight materials for structural applications. Polym J 44:334–339. https://doi.org/10.1038/pj.2011.140
Yang Y, Urban MW (2013) Self-healing polymeric materials. Chem Soc Rev 42:7446–7467. https://doi.org/10.1039/c3cs60109a
Guimard NK, Oehlenschlaeger KK, Zhou J, Hilf S, Schmidt FG, Barner-Kowollik C (2012) Current trends in the field of self-healing materials. Macromol Chem Phys 213:131–143. https://doi.org/10.1002/macp.201100442
White SR, Sottos NR, Geubelle PH, Moore JS, Kessler MR, Sriram SR, Brown EN, Viswanathan S (2001) Autonomic healing of polymer composites. Nature 409:794–797. https://doi.org/10.1038/35057232
Du P, Liu X, Zheng Z, Wang X, Joncheray T, Zhang Y (2013) Synthesis and characterization of linear self-healing polyurethane based on thermally reversible Diels-Alder reaction. RSC Adv 3:15475–15482. https://doi.org/10.1039/c3ra42278j
Feng L, Yu Z, Bian Y, Lu J, Shi X, Chai C (2017) Self-healing behavior of polyurethanes based on dual actions of thermo-reversible Diels-Alder reaction and thermal movement of molecular chains. Polymer (Guildf) 124:48–59. https://doi.org/10.1016/j.polymer.2017.07.049
Zhao J, Xu R, Luo G, Wu J, Xia H (2016) Self-healing poly(siloxane-urethane) elastomers with remoldability, shape memory and biocompatibility. Polym Chem 7:7278–7286. https://doi.org/10.1039/c6py01499b
Jian X, Hu Y, Zhou W, Xiao L (2018) Self-healing polyurethane based on disulfide bond and hydrogen bond. Polym Adv Technol 29:463–469. https://doi.org/10.1002/pat.4135
Yuan D, Bonab VS, Patel A, Manas-Zloczower I (2018) Self-healing epoxy coatings with enhanced properties and facile processability. Polymer 147:196–201. https://doi.org/10.1016/j.polymer.2018.06.017
Luo X, Mather PT (2010) Shape memory assisted self-healing coating. ACS Macro Lett 2:152–156. https://doi.org/10.1021/mz400017x
Parkin IP, Palgrave RG (2005) Self-cleaning coatings. J Mater Chem 15:1689–1695. https://doi.org/10.1039/b412803f
Ganesh VA, Raut HK, Nair AS, Ramakrishna S (2011) A review on self-cleaning coatings. J Mater Chem 21:16304–16322. https://doi.org/10.1039/c1jm12523k
Charpentier PA, Burgess K, Wang L, Chowdhury RR, Lotus AF, Moula G (2012) Nano-TiO2/polyurethane composites for antibacterial and self-cleaning coatings. Nanotechnology 23:425606. https://doi.org/10.1088/0957-4484/23/42/425606
Duarah R, Karak N (2018) High performing smart hyperbranched polyurethane nanocomposites with efficient self-healing, self-cleaning and photocatalytic attributes. New J Chem 42:2167–2179. https://doi.org/10.1039/c7nj03889e
Amarjargal A, Tijing LD, Park CH, Im IT, Kim CS (2013) Controlled assembly of superparamagnetic iron oxide nanoparticles on electrospun PU nanofibrous membrane: a novel heat-generating substrate for magnetic hyperthermia application. Eur Polym J 49:3796–3805. https://doi.org/10.1016/j.eurpolymj.2013.08.026
Singhal P, Small W, Cosgriff-Hernandez E, Maitland DJ, Wilson TS (2014) Low density biodegradable shape memory polyurethane foams for embolic biomedical applications. Acta Biomater 10:67–76. https://doi.org/10.1016/j.actbio.2013.09.027
Hsu SH, Tseng HJ, Lin YC (2010) The biocompatibility and antibacterial properties of waterborne polyurethane-silver nanocomposites. Biomaterials 31:6796–6808. https://doi.org/10.1016/j.biomaterials.2010.05.015
Guo C, Zheng Z, Zhu Q, Wang X (2007) Preparation and characterization of polyurethane/ZnO nanoparticle composites. Polym-Plast Technol Eng 46:1161–1166. https://doi.org/10.1080/03602550701575789
Das B, Chattopadhyay P, Mishra D, Maiti TK, Maji S, Narayan R, Karak N (2013) Nanocomposites of bio-based hyperbranched polyurethane/funtionalized MWCNT as non-immunogenic, osteoconductive, biodegradable and biocompatible scaffolds in bone tissue engineering. J Mater Chem B 1:4115–4126. https://doi.org/10.1039/c3tb20693a
Duarah R, Singh YP, Gupta P, Mandal BB, Karak N (2018) Smart self-tightening surgical suture from a tough bio-based hyperbranched polyurethane/reduced carbon dot nanocomposite. Biomed Mater 13:045004. https://doi.org/10.1088/1748-605X/aab93c
Moradi A, Dalilottojari A, Pingguan-Murphy B, Djordjevic I (2013) Fabrication and characterization of elastomeric scaffolds comprised of a citric acid-based polyester/hydroxyapatite microcomposite. Mater Des 50:446–450. https://doi.org/10.1016/j.matdes.2013.03.026
Meng ZX, Zheng W, Li L, Zheng FY (2011) Fabrication, characterization and in vitro drug release behavior of electrospun PLGA/chitosan nanofibrous scaffold. Mater Chem Phys 125:606–611
Hu CB, Myers KE, Nguyen-Thien-Nhon D, Kafesjian R (1999) Nonpolymeric epoxy compounds for cross linking biological tissue and bioprosthetic grafts prepared thereby. Baxter International Inc, U.S. Patent 5:880,242
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Duarah, R., Hazarika, D., Saikia, A., Bayan, R., Ghosh, T., Karak, N. (2019). Sustainable Polymeric Nanocomposites for Multifaceted Advanced Applications. In: Katiyar, V., Gupta, R., Ghosh, T. (eds) Advances in Sustainable Polymers. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-32-9804-0_16
Download citation
DOI: https://doi.org/10.1007/978-981-32-9804-0_16
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-32-9803-3
Online ISBN: 978-981-32-9804-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)