Abstract
In a radioactive waste management facility, solid waste is stored in stainless steel (SS) containers. Drop analysis of the container was performed to ensure the integrity of the container in case of the drop during the handling process. The simulation of drop test of the container from a height of 1.5 m with different orientations on a rigid base was carried out with the help of explicit dynamic method, and the results of stress and strain were analyzed based on which the dimensions and CAD modeling of the container were finalized. The design analysis and modeling of a radioactive waste SS container are done with the help of CAD tool. The container was designed in the square shape for the ease of handling it in every orientation with trunnions provided on each face for remote handling of the container which is operated by a remote handling crane.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bender J, Erleben K, Trinkle J (2014) Interactive simulation of rigid body dynamics in computer graphics. Comput Graph Forum 33(1):246–270
Weinstein R, Teran J, Fedkiw R (2006) Dynamic simulation of articulated rigid bodies with contact and collision. IEEE Trans Visual Comput Graph 12(3)
Smith B, Kaufman DM, Vouga E, Tamstorf R, Grinspun E (2012) Reflections on simultaneous impact. ACM Trans Graph (TOG), Article no 106
Franco RL, Pugliese G, Nasta M (2014) Structural performance of an IP2 package in free drop test conditions: numerical and experimental evaluation. Nucl Eng Des 280:634–643
Introduction to meshing. https://altairuniversity.com/wp-content/uploads/2014/02/meshing.pdf. Accessed 7 Apr 2019
Zavattieri PD, Buscaglia GC, Dari EA (1996) Finite element mesh optimization in three dimensions. Latin Am Appl Res 26:233–236
Geuzaine C, Remacle J-F (2009) A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilities. Int J Numer Methods Eng 79(11):1309–1331
Cowper G, Symonds P (1957) Strain hardening and strain-rate effects in the impact loading of cantilever beams. Technical report, Brown University Division of Applied Mathematics, Technical Report No. 28
Gokhale NS, Deshpande SS, Bedekar SV (2008) Practical finite element analysis, Finite to infinite publication, pp 321–349
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Brar, S., Gupta, J., Kumar, B., Singh, K.M. (2020). Design and Modeling of Waste Container Package Considering Impact and Remote Handling Operation. In: Deepak, B., Parhi, D., Jena, P. (eds) Innovative Product Design and Intelligent Manufacturing Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-2696-1_24
Download citation
DOI: https://doi.org/10.1007/978-981-15-2696-1_24
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2695-4
Online ISBN: 978-981-15-2696-1
eBook Packages: EngineeringEngineering (R0)