Abstract
Electrical Capacitance Tomography is part of Electrical Tomography which uses the concept of electric field distribution and it is widely used due to its advantages such as non-invasive, low-cost, high acquisition speed and relatively easy computation. The ECT system involves two computational problems in its mechanism which Forward Problem and Inverse Problem. The forward problem involves the computation of the potentials done at the voltage pick-up electrodes for a given set of current-carrying electrodes. This allows calculation for the distribution of the electrical voltage when the given with condition of known sensor structure and given permittivity distribution. The Forward Problem in this study refers to the sensitivity map which is later used for image reconstruction in the Inverse Problem image. This study explores sensitivity map generation and preparation which can be accomplished using the numerical method, for example, the Finite Element Method. Based on the simulated result, the sensitivity map for each projection shows different strength depending on the position and distance between the electrode pair.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Ren Z, Kowalski A, Rodgers TL (2017) Measuring inline velocity profile of shampoo by electrical resistance tomography (ERT). Flow Meas Instrum 58(September):31–37
Rafiei-Naeini M, Wright P, McCann H (2007) Low-noise measurement for electrical impedance tomography. In: International conference on electrical bioimpedance and the 8th conference on electrical impedance tomography, 2007, pp 324–327
Ren Z, Member S, Yang W (2015) A miniature two-plate electrical capacitance tomography sensor. IEEE Sens J 15(5):3037–3049
Mohd Razali NA et al (2015) Miniaturized planar tomography for multiphase stagnant sample detection. J Teknol 73(6):99–102
Yan H, Liu LJ, Qiang DZ (2009) An iterative electrical capacitance tomography image reconstruction algorithm. 12(2):9–12
Marashdeh Q, Teixeira FL (2004) Sensitivity matrix calculation for fast 3-D electrical capacitance tomography (ECT) of flow systems. 40(2):1204–1207
Xingxing Z, Jinchuang Z, Wenli F (2016) Computation of sensitivity map in adaptive electrical capacitance volume tomography based on voltage distribution. In: ICSPCC 2016—IEEE international conference on signal processing, communications and computing, conference proceedings, 2016, pp 1–4
Kang Y, Liu S, Liu J (2018) Image reconstruction algorithm for electrical capacitance tomography based on data correlation analysis. Flow Meas Instrum 62(July):113–122
Liu QF, Han Y (2013) Analysis of the effect of stray capacitance on a charge/discharge-based electrical capacitance tomography system. Optik (Stuttg) 124(23):6009–6012
Zhang L, Zhai Y, Wang X, Tian P (2018) Reconstruction method of electrical capacitance tomography based on wavelet fusion. Meas J Int Meas Confed 126(May):223–230
Fan WR, Wang HX (2010) Maximum entropy regularization method for electrical impedance tomography combined with a normalized sensitivity map. Flow Meas Instrum 21(3):277–283
Soleimani M (2005) Numerical modelling and analysis of the forward and inverse problems in electrical capacitance tomography. Int J Inf Syst Sci 1(1):193–207
Oldenborger GA, Routh PS, Knoll MD, Routh S, Knoll MD (2005) Sensitivity of electrical resistivity tomography data to electrode position errors. Geophys J Int 163:1–9
Ridzuan S et al (2015) Jurnal Teknologi full paper simulation study on electrical resistance tomography using metal wall for bubble detection. 6:31–35
Liyana H et al (2018) Sensitivity mapping for electrical tomography using finite element method. Int J Integr Eng 10(4):64–67
Yunus M, Hafiz M, Rahiman F, Abdul Y (2015) Sensitivity map generation for conducting strategy in electrical resistance tomography. J Teknol 17:91–97
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Ropandi, W.A.N. et al. (2020). Sensitivity Maps Preparation for Electrical Capacitance Tomography Using Finite Element Approach. In: Kasruddin Nasir, A.N., et al. InECCE2019. Lecture Notes in Electrical Engineering, vol 632. Springer, Singapore. https://doi.org/10.1007/978-981-15-2317-5_7
Download citation
DOI: https://doi.org/10.1007/978-981-15-2317-5_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2316-8
Online ISBN: 978-981-15-2317-5
eBook Packages: EngineeringEngineering (R0)