Abstract
Many reserachers focuses on the special machine like Switched reluctance motor (SRM) because of peculiar performance compared to various standard motors. This paper reviews the various power convertor topologies developed for the SRM. Switched reluctance motor (SRM) is gaining abundant interest in industrial applications like wind energy systems and electrical vehicles—thanks to its straightforward and rugged construction, high‐speed operation ability, inability to warm temperature, and its options of fault tolerance. This paper provides indepth analysis with completely different topologies have been emerged and presented less torsion ripple, high potency, high power issue, and high power density. However, there has forever been a trade‐off between gaining a number of the advantageous and losing some with every new technology. During this chapter, numerous SRM topologies, design, principle of operation, and individual section change schemes are extensively reviewed, and their blessings and downsides are mentioned.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
F. Peng, A. Emadi, A digital PWM current controller for switched reluctance motor drives
Y. Guo, Q. Ma, Relative study on torque ripple suppression method of three-phase 6/4 switched reluctance motor
F. Sofiane, H. Le-Huy, I. Kamwua, Fluffy direct adaptive direct torque control of switched reluctance motor
Dr. E.V.C.S. Rao, Torque ripple minimization of switched reluctance motor by using fuzzy logic controller
L.O.P. Henriques, L.G.B. Rolim, W.I. Suemitsu, P.C. Branco, J.A. Dente, Torque ripple minimization of switched reluctance drive using a neuro-fuzzy control technique
P. Ramesh, P. Subbaiahissn, Speed control of SR drive using FLC. Int. J. Grid Distributed comput. 8(6), 185–192 (2015)
L. Kalaivani, P. Subburaj, W.I. Mariasiluvairaj, Man-made reasoning based control for torque ripple minimization in switched reluctance motor drives
F. Peng, J. Ye, A. Emadi, Y. Huangieee, Position sensor less control of switched reluctance motor drives based on numerical method
A. Kabir, I. Husain, Fragmented rotor design of concentrated wound Switched Reluctance Motor (SRM) for torque ripple minimization
Y. Sozer, I. Husain, Direction in choosing propelled control procedure for exchanged hesitance machine drives in developing applications. IEEE Exchange Ind. Appl. https://doi.org/10.1109/tia.2015.2444357
H. Cheng, H. Chen, Z. Yang, Normal torque control of exchanged hesitance machine drives for electric vehicles. https://doi.org/10.1049/iet-epa.2014.0424. ISSN 1751-8660
R. Madhavan, B.G. Fernndes, Execution improvement in the pivotal transition fragmented rotor-exchanged hesitance engine. IEEE Exchanges Vitality Transform.
J. Ye, B. Berkerbilgin, A. Emadi, An broadened speed low-swell torque control of exchanged hesitance engine drived. IEEE Exchange Power Electron. https://doi.org/10.1109/TPEL.2014.2316272
Z. Xu, D-H. Lee, Comparative examination of bearingless exchanged hesitance engines with decoupled suspending power control. IEEE Exchange Ind. Appl. https://doi.org/10.1109/TIA.2014.2331422
V. P. Vujicic, Minimization of torque swell and copper misfortunes in exchanged hesitance drive. IEEE Exchange Power Hardware. 27(1) (2012)
S. Kumarsahoo, S. Dasgupta, A Lyapunov work based vigorous direct torque controller for an exchanged hesitance engine drive framework. IEEE Exchange Power Gadgets. 27(2) (2012)
J.M. Stephenson, A. Hughes and R. Mann, Torque swell minimization in an exchanged hesitance engine by ideal symphonious current infusion. IEEE procedures online no. 20010480. https://doi.org/10.1049/ip-epa:20010480
J. Keyan, Study on direct torque control arrangement of exchanged hesitance engine. IEEE 978-1-4244-97’8/11/2011
C. Gan, J. Wu, A audit on machine topologies and control systems for low – clamor exchanged hesitance engines in electric vehicle applications. IEEE Access 16, 31430–31443 (2018)
C. Li, G. Wang, An improved finite– state prescient torque control for exchanged hesitance engine drive. IET Electric Power Appl.
I. Relev, F. Qi, B. Burkhart, Imapct of smooth torque control on the effectiveness of a rapid car exchanged hesitance drive. IEE Trans. Ind. Appl. https://doi.org/10.1109/tia.2017.2743680
X. Deng, B.C. Mecrow, R. Marin, Design and advancement of low torque swell variable-speed drive framework with six-stage exchanged hesitance motors. IEE Trans. Vitality Convers. https://doi.org/10.1109/tec.2017.2753286
H.N. Huang, K. Hu, Switch-mode rectifier sustained exchanged hesitance engine drive with dynamic compensation moving utilizing dc connect current. IET Electric Power Appl.
D. Peter, P. Rafajdus, Control of exchanged hesitance engine by flow profiling under ordinary and open stage working condition. IET Electric Power Appl.
Y. Hu, W. Ding, T. Wang, Investigation on a multi-mode exchanged hesitance motor: design, optimization, electromagnetic investigation and experiment. IEE Trans. Modern Gadgets
E. Bostanci, M. Moallem, Opportunities and difficulties of exchanged hesitance engine drive for electric propulsion: a comparative study. IEEE Trans. Transp. Zap
M. Jafari, H. Kermanipour, B. Ganji, Modification in geometric structure of twofold – sided pivotal transition exchanged hesitance engine for relieving torque swell adjustment dela structure geometrique dun motion hub a hesitance drive AFSRM a twofold face pour uneondulation de couple attenuee. 38(4) (2015)
N. Kurihara, J. Bayless, Noise decrease of exchanged hesitance engine with high number of posts by novel streamlined current waveform at low speed and low torque region. IEE Trans. Ind. Appl.
H. Chen, D. Zhang, ZY. Cong, ZF. Zhang, Fluffy logic control for switched hesitance engine drive, in Proceedings of the First International Conference on Machine Learning and Cybernetics, Beijing, 45 November 2002
C. Shang, D. Reay, B. Williams, Adjusting CMAC neural networks with constrained LMS algorithm for efficient torque ripple decrease in switched reluctance motors. IEEE Trans. Control Syst. Technol. 7(4), 401–413 (1999)
I. Kioskeridis, C. Mademlis, A unified approach for four-quadrant optimal controlled switched reluctance machine drives with smooth transition between control operations. IEEE Trans. Power Electron. 24(1), 301–306 (2009)
H. Gao, F.R. Salmasi, M. Ehsani, Inductance model-based sensor less control of the switched reluctance motor drive at low speed. IEEE Trans. Power Electron. 19(6), 1568–1573 (2004)
M. Rodrigues, P.J. Costa Branco, W. Suemitsu, Fluffy logic torque ripple reduction by turn-off angle compensation for switched reluctance motors. IEEE Trans. Ind. Electron. 48(3), 711–715 (2001)
X. Li, P. Shamsi, Inductance surface learning for model predictive current control of switched reluctance motors. https://doi.org/10.1109/tte.2015.2468178
Y. Sato, Improvement of a 2-degree-of-freedom rotational/linear switched reluctance motor. IEEE Trans. Magn. 43(6), 2564–2566 (2007)
S.M. Lukic, A. Emadi, State-switching control technique for switched reluctance motor drives: theory and implementation. IEEE Trans. Ind. Electron. 57(9), 2932–2938 (2010)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, V.M., Vinoth Kumar, K., Saravanakumar, R. (2020). Switched Reluctance Motor Converter Topologies: A Review. In: Saini, H., Srinivas, T., Vinod Kumar, D., Chandragupta Mauryan, K. (eds) Innovations in Electrical and Electronics Engineering. Lecture Notes in Electrical Engineering, vol 626. Springer, Singapore. https://doi.org/10.1007/978-981-15-2256-7_6
Download citation
DOI: https://doi.org/10.1007/978-981-15-2256-7_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-2255-0
Online ISBN: 978-981-15-2256-7
eBook Packages: EngineeringEngineering (R0)