Abstract
In this work, the performance of different multi-layer barrier constructions in attenuating noise has been studied experimentally. Machine-induced low-frequency noise within the frequency range of 100–500 Hz is focused in this work. Six different multi-layer barrier constructions have been employed for this purpose. Wood has been used as the rigid, reflective layer while glass wool and PE foam has been used as the soft, absorbing layers. An enclosure with five fixed walls and one flexible wall containing the noise barrier has been constructed to perform the experiments. A CASELLA CEL-62X Sound Pressure Level meter has been used to measure sound pressure at different frequencies. Results indicate that the transmission losses are not higher than 18 dB for the frequency range of interest. Results also reveal that triple-layer wooden barrier has superior performance in attenuating low-frequency noise although sandwich barriers are more suitable for higher frequencies.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- Symbol :
-
Parameter
- τ :
-
Transmittance
- ρ :
-
Density of medium
- ρ s :
-
Mass per unit area
- c :
-
Speed of sound
- η :
-
Structural loss factor
- k :
-
Stiffness per unit area
- ω :
-
Frequency of incident sound
- θ :
-
Angle of incident sound
- TL:
-
Transmission loss
- I :
-
Sound intensity
References
Dahlke, B., Larbig, H., Scherzer, H.D., Poltrock, R.: Natural fiber reinforced foams based on renewable resources for automotive interior applications. J. Cell. Plast. 34(4), 361–379 (1998)
Khedari, J., Charoenvai, S., Hirunlabh, J.: New insulating particleboards from durian peel and coconut coir. Build. Env. 38(3), 435–441 (2003)
Khedari, J., Nankongnab, N., Hirunlabh, J., Teekasap, S.: New low-cost insulation particleboards from mixture of durian peel and coconut coir. Build. Env. 39(1), 59–65 (2004)
Rozli, Z., Zulkarnain, Z.: Noise control using coconut coir fiber sound absorber with porous layer backing and perforated panel. Amer. J. Appl. Sci. 7(2), 260–264 (2010)
Ono, T., Miyakoshi, S., Watanabe, U.: Acoustic characteristics of unidirectionally fiber-reinforced polyurethane foam composites for musical instrument soundboards. Acoust. Sci. Tech. 23(3), 135–142 (2002)
Yang, H.S., Kim, D.J., Kim, H.J.: Rice straw–wood particle composite for sound absorbing wooden construction materials. Biores. Tech. 86(2), 117–121 (2003)
Ross, D.: Damping of plate flexural vibrations by means of viscoelastic laminae. Struct. Damp. 49–97 (1959)
Holmer, C.I.: The coincidence wall: a new design for high transmission loss or high structural damping. J. Acoust. Soc. Am. 46(1A), 91 (1969)
Manning, J.E.: Development of the coincidence wall as a high TL panel. Cambridge Collaborative Report No. 1 (1971)
Ford, R.D., Lord, P., Walker, A.W.: Sound transmission through sandwich constructions. J. Sound Vibr. 5(1), 9–21 (1967)
Smolenski, C.P., Krokosky, E.M., Ewers, G.: Dilatational-mode sound transmission in sandwich panels. J. Acoust. Soc. Am. 45(1), 297–298 (1969)
Lee, J.: Compact sound absorbers for low frequencies. Noise Contr. Eng. J. 38, 109–117 (1992)
Yang, Z., Dai, H.M., Chan, N.H., Ma, G.C., Sheng, P.: Acoustic metamaterial panels for sound attenuation in the 50–1000 Hz regime. Appl. Phy. Lett. 96(4), 041906 (2010)
Mei, J., Ma, G., Yang, M., Yang, Z., Wen, W., Sheng, P.: Dark acoustic metamaterials as super absorbers for low-frequency sound. Nat Comm. 3, 756 (2012)
Cowan, A.J.: Sound transmission loss of composite sandwich panels (2013). https://ir.canterbury.ac.nz/handle/10092/7879
Rudder, Jr., F.F.: Airborne sound transmission loss characteristics of wood-frame construction (No. FSGTR-FPL-43). Forest Products Lab Madison WI (1985)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Khan, A.H., Razzaque, M.M., Islam, M.S. (2020). Performance Evaluation of Multi-layer Barriers for Machine-Induced Low-Frequency Noise Attenuation. In: Reddy, A., Marla, D., Simic, M., Favorskaya, M., Satapathy, S. (eds) Intelligent Manufacturing and Energy Sustainability. Smart Innovation, Systems and Technologies, vol 169. Springer, Singapore. https://doi.org/10.1007/978-981-15-1616-0_1
Download citation
DOI: https://doi.org/10.1007/978-981-15-1616-0_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1615-3
Online ISBN: 978-981-15-1616-0
eBook Packages: EngineeringEngineering (R0)