Abstract
This paper presents the design of a novel low-cost motorized wheelchair exoskeleton device to provide locomotive assistance and physical rehabilitation to paraplegic patients in the age group of 20–75 years. CAD modeling of different parts of the device has been completed using SOLIDWORKS software. Mathematical calculations are performed to estimate the torque requirements to drive rear wheels, and maximum torque requirement at knees in static condition. Static structural analysis of different parts of the mechanism is performed using ANSYS software for optimization and validation of the proposed design. The reduction in the overall mass of the mechanism is achieved by multi-use of actuators, where a single motor has been used for motion at more than one joints in the device. A mechanism is also designed to allow easy switching of power for the motors from one joint to the other. Further, to make the device eligible for use by people of different heights, adjustability in height of the mechanism has been achieved via the use of telescoping link mechanisms for legs of the device. The aim is to come up with a low-cost device which along with fulfilling the mobility requirements stays light, without compromising the strength and motion capabilities of the device.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Patnaik L, Sahoo HS, Sahu T (2015) Awareness of the warning symptoms and risk factors of stroke among adults seeking health care from a rural hospital of India. Ann Indian Acad Neurol 18:487–488. https://doi.org/10.4103/0972-2327.165479
Lee S, Sankai Y (2002) Power assist control for walking aid with HAL-3 based on EMG and impedance adjustment around knee joint. In: IEEE international conference on intelligent robots and systems vol 2. pp 1499–1504. https://doi.org/10.1109/irds.2002.1043967
Banala SK, Kim SH, Agrawal SK, Scholz JP (2009) Robot assisted gait training with active leg exoskeleton (ALEX). Neural Sys Rehabil Eng 17(1):2–8. https://doi.org/10.1109/TNSRE.2008.2008280
Veneman JF, Kruidhof R, Hekman EE, Ekkelenkamp R, Van Asseldonk EH, Van Der Kooij H (2007) Design and evaluation of the LOPES exoskeleton robot for interactive gait rehabilitation. Neural Sys Rehabil Eng 15:379–386. https://doi.org/10.1109/TNSRE.2007.903919
ReWalk Robotics, ReWalk Personal 6.0. http://rewalk.com/rewalk-personal-3
Jezernik S, Colombo G, Keller T, Frueh H, Morari M (2003) Robotic orthosis lokomat: a rehabilitation and research tool. Neuromodulation Technol Neural Interface 6:108–115. https://doi.org/10.1046/j.1525-1403.2003.03017.x
Shankar T, Dwivedy SK (2015) A hybrid assistive wheelchair-exoskeleton. In: Proceedings of the international convention on rehabilitation engineering & assistive technology. Singapore Therapeutic Assistive and Rehabilitative Technologies (START) Centre
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Gupta, M., Narayan, J., Dwivedy, S.K. (2020). Modeling of a Novel Lower Limb Exoskeleton System for Paraplegic Patients. In: Maity, D., Siddheshwar, P., Saha, S. (eds) Advances in Fluid Mechanics and Solid Mechanics. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-0772-4_18
Download citation
DOI: https://doi.org/10.1007/978-981-15-0772-4_18
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0771-7
Online ISBN: 978-981-15-0772-4
eBook Packages: EngineeringEngineering (R0)