Abstract
Engineering quantity calculation is the premise and foundation of cost control in architectural engineering. However, the traditional calculation method of engineering quantity way by manual method is inefficient and with low precision. The calculation is faster and more accurate if Building Information Modeling (BIM) technology is applied. In this paper, the development and histories of BIM applications in engineering cost management are introduced. Based on the data of an actual building, a simulation model is established by BIM software. The engineering quantities are calculated, and then, the results of the traditional manual calculation method of engineering quantity and calculation method of BIM are compared and analyzed. The data with a relative error of more than 10% is listed, and the reason for the relative error is conducted. It is concluded that the rules of BIM calculation and manual calculation are different, causing BIM method not accurate enough for some nodes. The suggested method is that BIM method is firstly applied for the total engineering quantity calculation, and then, the manual method is proposed to check the accuracy in some key nodes.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhou, J.L., Wu, Y.X., Yan, X.F.: The development of American BIM technology and its enlightenment to the transformation and upgrading of China’s construction industry. Sci. Technol. Prog. Policy 31(11), 30–33 (2014)
Zhao, Q.: Application status and development countermeasures of BIM-based engineering cost calculation software. Tendering and Bidding 6(07), 52–55 (2018)
Liu, R., Xu, Y.: A review of the application of BIM in engineering cost. Proj. Manag. Technol. 12(07), 34–37 (2014)
Yue, W., Hong, Y., Jin, B.: Analysis of BIM technology development and assembly building application. Constr. Des. Eng. S1, 32–33 (2018)
Zhu, Z.: Development and promotion of BIM in China. Sci. Technol. Innov. 32, 244 (2016)
Zhang, H.: Research on BIM promotion project cost management development. J. Beijing Univ. Civ. Eng. Archit. (2014)
Zhang, J.P., Li, D., Lin, J.R., Yan, G.W.: Application of BIM in engineering construction. Constr. Technol. 41(16), 10–17 (2012)
Ye, S.: Application of BIM technology in construction engineering cost management. China High-Tech Enterp. 28, 51–53 (2015)
Fu, H., Shi, J.Y., Wang, K.: Engineering quantity calculation and pricing method based on BIM. J. Civ. Eng. Manag. 35(01), 138–145 (2018)
Tang, Y.: Research on the application of BIM technology in engineering cost management. Green Environ. Protect. Build. Mater. 10, 160–162 (2018)
Acknowledgements
The project is supported by the National Natural Science Foundation of China (Grant No. 51806096) and the Natural Science Foundation of the Jiangsu Higher Education Institutions of China (Grant No. 18KJB560007).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Xu, X., Wang, Y., Liu, J., Yuan, X., Bao, J., Chou, X. (2020). Research and Accuracy Analysis on Engineering Quantity Calculation of a Projected Building by BIM Software. In: Wang, Z., Zhu, Y., Wang, F., Wang, P., Shen, C., Liu, J. (eds) Proceedings of the 11th International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC 2019). ISHVAC 2019. Environmental Science and Engineering(). Springer, Singapore. https://doi.org/10.1007/978-981-13-9528-4_1
Download citation
DOI: https://doi.org/10.1007/978-981-13-9528-4_1
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-9527-7
Online ISBN: 978-981-13-9528-4
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)