Abstract
In the state of Gujarat, India, a significant part of the area is covered by expansive soil deposits. The swelling and shrinkage characteristics of expansive soil as a result of wetting and drying cause problems for safety and/or performance of structures. The concept of reinforcing soil with fibres, resulting in a randomly distributed fibre-reinforced soil (RDFS), has been studied in significant details, especially for reinforcing granular soils. Studies on fibre-reinforced expansive soils as reported in the literature are very limited. One of the major problems in the study of fibre-reinforced expansive soils is how to mix fibres uniformly. Therefore, the main objective of this paper is to study the available mixing methods, assess their suitability and develop a new mixing technique, which will be cost-effective for mixing fibres with expansive soil, especially in developing countries. In the present study, a surface modification method with cement has been proposed, where the waste tyre fibres (WTFs) were coated with cement to improve the bonding between fibres and clay minerals. The effect of this modification on the strength property of reinforced soil has been examined with unconfined compressive strength analysis. The results show that the shear strength between cement coated fibres and soil is significantly higher than the shear strength between fibres and natural soil.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Al-Wahab RM, Al-Qurna H (1995) Fibre reinforced cohesive soils for application in compacted earth structures. In: Proceedings of Geosynthetics’ 95, vol. 2. Nashville, TN, USA, pp. 433–446
Amir-Faryar Aggour MS (2012) Determination of optimum fibre content in a fibre-reinforced clay. J Test Eval 40(2):334–337
ASTM D6270-08 (2012) Standard practise for use of scrap tires in civil engineering applications. West Conshohocken, PA: American Society for Testing and Materials
ATMA 2017: Automotive Tyre Manufacturers Association (ATMA)
Balunaini U (2014) Shear strength of tyre chip–sand and tyre shred–sand mixtures. Proc ICE-Geotech Eng 16(GE6):585–595. https://doi.org/10.1680/geng.13.00097
Consoli NC, Cruz RC, Floss MF (2011) Variables controlling strength of artificially cemented sand: influence of curing time. J Mater Civ Eng 23 (5):692–696. https://doi.org/10.1061/(asce)MT.1943-5533.0000205
Edil T, Bosscher P (1994) Engineering properties of tire chips and soil mixtures. Geotech Test J 17(4):453–464. https://doi.org/10.1520/GTJ10306J
Freitag DR (1986) Soil randomly reinforced with fibres. J Mater Civ Eng 112(8):823–826
Gosavi M, Patil KA, Mittal S, Saran S (2004) Improvement of properties of black cotton soil subgrade through synthetic reinforcement. J Inst Eng (India) 84(2):257–262
Hoover JM, Moeller DT, Pitt JM, Smith SG, Wainaina NW (1982) Performance of randomly oriented fibre-reinforced roadway soils—a laboratory and field investigation. Iowa DOT Project Report HR-211, Department of Civil Engineering, Engineering Research Institute, Iowa State University, Ames
IS 2720-10 (1991) Methods of test for soils. Part 10: Determination of unconfined compressive strength
IS 2720-4 (1985) Indian standard. Methods of test for soils. Part 1 Grain size analysis
IS 2720-7, (1980) Light/Standard proctor compaction test of soil
Kalkan E, (2013) Preparation of scrap tire rubber fibre–silica fume mixtures for modification of clayey soils. Appl Clay Sci
Kumar P, Singh SP (2008) Fibre-reinforced fly ash sub bases in rural roads. J Transp Eng ASCE 134(4):171–180
Maher M, Ho Y (1994) Mechanical properties of kaolinite/fibre soil composite. J Geotech Eng 120(8):1381–1393
Mirzababaei M, Miraftab M, Mohamed M, McMahon M (2013) Unconfined compression strengthof reinforced clays with carpet waste fibres. J Geotech Geoenviron Eng ASCE 139(3):483–493
Park S (2011) Unconfined compressive strength and ductility of fibre-reinforced cemented sand. Constr Build Mater 25(2):1134–1138
Prabakar J, Sridhar RS (2002) Effect of random inclusion of sisal fibre on strength behaviour of soil. Constr Build Mater 16(2):123–131
Shukla SK (2017) Fundamentals of fibre-reinforced soil engineering. Springer Nature, Singapore
Szymkiewicz F (2012) Influence of grain size distribution and cement content on the strength and aging of treated sandy soils. Eur J Environ Civ Eng 16(7):882–902. https://doi.org/10.1080/19648189.2012.676362
Tang C, Shi B, Gao W, Cai Y, Liu J (2007) Study on effect of sand content on strength of polypropylene fibre reinforced clay soil. Chin J Rock Mech Eng 1:2968–2973
Yaghoubi M, Shukla SK, Mohyeddin Alireza (2017) Effects of addition of waste tyre fibres and cementon the engineering behaviour of Perth sand. Geomech Geoengin. https://doi.org/10.1080/17486025.2017.1325941
Zaimoglu AS, Yetimoglu T (2011) Strength behavior of fine grained soil reinforced with randomly distributed polypropylene fibres. Geotech Geol Eng 30(1):197–203
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Mistry, M., Shukla, T., Venkateswalu, P., Shukla, S., Solanki, C., Shukla, S.K. (2019). A New Mixing Technique for Randomly Distributed Fibre-Reinforced Expansive Soil. In: Agnihotri, A., Reddy, K., Bansal, A. (eds) Environmental Geotechnology. Lecture Notes in Civil Engineering , vol 31. Springer, Singapore. https://doi.org/10.1007/978-981-13-7010-6_15
Download citation
DOI: https://doi.org/10.1007/978-981-13-7010-6_15
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-7009-0
Online ISBN: 978-981-13-7010-6
eBook Packages: EngineeringEngineering (R0)