Abstract
In recent years, the applications of rare earth permanent magnetic materials have been expanding, especially in the fields of wind power generation, new energy vehicles and energy-efficient appliances. The scarcity of natural heavy rare earth restricted the broad applications of Nd–Fe–B magnets. Therefore, enhancing the coercivity of the Nd–Fe–B magnets with free or lean heavy rare earth have drawn attention recently. The Nd–Fe–B magnets prepared by hot pressing and hot deformation process possess nanoscale lamellar grains, exhibiting potential to produce the high coercivity magnets without the addition of heavy rare earth elements. The progress in the research on the hot pressing and hot deformation technology for Nd–Fe–B production were summarized. The effect of alloying elements and preparation technologies on the microstructure and properties of hot-deformed magnets was introduced, providing references for preparing high performance Nd–Fe–B magnets by hot pressing and hot deformation process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
S.Z. Zhou, Q.F. Dong, Superstrong Permanent Magnet (Beijing, 2013)
A.R. Yan, C. Zhang, New Rare Earth Permanent Magnet Materials and Permanent Magnet Motor (Beijing, 2014)
M.Y. Zhu, J. Jiang, Q.P Yang et al., Single stage hot deformation process for fabrication of anisotropic NdFeB magnet. Adv. Magn. Mater., 527–530 (2004)
H. Tian, D. Jin, Y. Li et al., Microstructure and magnetic properties of anisotropic Nd-Fe-B magnets fabricated by single-stage hot deformation. J. Rare Earths 24(s1), 318–320 (2006)
T. Mouri, M. Kumano, H.Y. Yasuda et al., Effect of two-stage deformation on magnetic properties of hot-deformed Nd-Fe-B permanent magnets. Scripta Mater. 78–79(5), 37–40 (2014)
Y. Li, Y.B. Kim, M.S. Song et al., The temperature dependence of the anisotropic Nd-Fe-B fabricated by single-stage hot deformation. J. Magn. Magn. Mater. 263(1–2), 11–14 (2003)
B. Chen, J. Li, Y. Liu et al., Structural and magnetic properties of single-stage hot deformed NdFeB magnets prepared by different initial densities. Rare Met. 33(4), 448–451 (2014)
Y. Li, Y.B. Kim, L. Wang et al., The influence of the powder particle size on the anisotropic properties of NdFeB magnets produced by single-stage hot deformation. J. Magn. Magn. Mater. 223(3), 279–283 (2001)
W. Li, M.G. Zhu, Mechanism of hot-deformation and magnetic domains of anisotropic die-upset rare earth permanent magnets. Eng. Sci. China 13(10), 4–12 (2011)
W. Li, M.G. Zhu, Research progress of hot deformed nanocrystalline NdFeB magnets in China Electrotechnical Society Annual Conference (2011)
A.R. Yan, Z. Liu, S. Guo, Recnet research development of rare-earth permanent magnetic materials. Metal. Funct. Mater. 24(5), 5–16 (2017)
R. Gopalan, H. Sepehri-Amin, K. Suresh et al., Anisotropic Nd–Fe–B nanocrystalline magnets processed by spark plasma sintering and in situ hot pressing of hydrogenation–decomposition–desorption–recombination powder. Scripta Mater. 61(10), 978–981 (2009)
X.Q. Li, L. Li, H.U. Ke et al., Microstructure and magnetic properties of anisotropic NdFeB magnets prepared by spark plasma sintering and hot deformation. Trans. Nonferrous Metals Soc. C 24(10), 3142–3151 (2014)
Y.H. Hou, Y.L. Wang, Y.L. Huang et al., Effects of Nd-rich phase on the improved properties and recoil loops for hot deformed Nd-Fe-B magnets. Acta Mater. 115, 385–391 (2016)
Y.H. Hou, Y.L. Huang, Z.W. Liu et al., Hot deformed anisotropic nanocrystalline NdFeB based magnets prepared from spark plasma sintered melt spun powders. Mater. Sci. Eng., B 178(15), 990–997 (2013)
Y.L. Huang, Preparation, Microstructure, and Properties of Isotropic and Anisotropic Nanocrystalline NdFeB-Based Magnets. South China University of Technology (2012)
W.W. Zhang, Study on Microstructure and Properties of Hot Pressed/Hot Deformed Nd2(FeCo)14B/α-(FeCo) Magnetic Materials. Ningbo University (2010)
P.P. Yi, M. Lin, R.J. Chen et al., Enhanced magnetic properties and bending strength of hot deformed NdFeB magnets with Cu additions. J. Alloy. Compd. 491(1), 605–609 (2010)
G. Sadullahoġlu, B. Altuncevahir, A.O. Addemir, Effect of intergranular phase segregation on magnetic properties of NdFeB magnet. Electron. Mater. Lett. 10(1), 153–157 (2014)
Y. Li, Y.B. Kim, T.S. Yoon et al., Coercivity enhancement by Zn addition in hot deformed NdFeB magnets. J. Magn. Magn. Mater. 242(4), 1369–1371 (2002)
T. Saito, Y. Sajima, D. Nishio-Hamane, Enhancement of magnetic properties by Zn addition in Nd-Fe-B hot deformed magnets produced by spark plasma sintering method. J. Alloy. Compd. 687, 662–666 (2016)
M. Lin, H.J. Wang, J.W. Zheng et al., Effects of Fe fine powders doping on hot deformed NdFeB magnets. J. Magn. Magn. Mater. 379(1), 90–94 (2015)
C.G. Wang, M. Yue, D.T. Zhang et al., Structure and magnetic properties of hot deformed Nd2Fe14B magnets doped with DyHx nanoparticles. J. Magn. Magn. Mater. 404, 64–67 (2016)
X.F. Zheng, M. Lin, R.J. Chen et al., Coercivity enhancement by inhibiting the formation of coarse grains region in hot-deformed NdFeB magnets with WC nano-particles addition. Scripta Mater. 132, 49–52 (2017)
X. Du, C.H. Guo, M.G. Zhu et al., The influence of Nd-Cu alloy addition on the magnetic properties of die-upset Nd-Fe-B namocrystalline magnets. Funct. Mater. Suppl. II (46), 64–67 (2015)
X. Du, The influence of low melting point RE-Cu alloy on the coercivity of Nd-Fe-B die-upset matnets (China Iron and Steel Research Institute Group, 2015)
Z. Jing, J.S. Hu, C.H. Guo et al., Nd-Fe-B/PrCo5 anisotropic hybrid magnets. Rare Met. 41(9), 997–1002 (2017)
Z. Jing, C.H. Guo, M.G. Zhu et al., Investigation of Nd-Fe-B /PrCo5 hot-pressed hybrid magnets. J. Chin. Soc. Rare Earths (3), 282–288 (2016)
H.W. Chang, Y.I. Lee, P.H. Liao et al., Significant coercivity enhancement of hot deformed NdFeB magnets by doping Ce-containing (PrNdCe)70Cu30 alloys powders. Scripta Mater. 146, 222–225 (2018)
F. Bai, Study on Magnetoelectric Properties and Microstructure of Hot Pressing (Nd,Ce)2Fe14B/CaF2 Composite Magnets. Hebei University of Engineering (2016)
Z.H. Hu, H.J. Qu, J.Q. Zhao et al., Effect of amorphous powder blend on the magnetic and mechanical properties of die-upset Nd-Fe-B magnets. J. Magn. Magn. Mater. 358–359(5), 204–207 (2014)
B. Lai, Y.F. Li, H.J. Wang et al., Effect of wheel speed and pressure difference on melt-spun NdFeB powders and die-upset magnet. Funct. Mater. 45(3), 83–87 (2014)
B. Lai, Y.F. Li, H.J. Wang et al., Quasi-periodic layer structure of die-upset NdFeB magnets. J. Rare Earths 31(7), 679–684 (2013)
P.P. Yi, W. Lin, H.J. Wang et al., Effect of hot-pressed progress on the magnetic properties of die-upset Nd-Fe-B magnets. Rare Metal Mater. Eng. 38(s1), 576–578 (2009)
J. Song, M. Yue, J.H. Zuo et al., Structure and magnetic properties of bulk nanocrystalline Nd-Fe-B permanent magnets prepared by hot pressing and hot deformation. J. Rare Earths 31(7), 674–678 (2013)
X. Tang, R.J. Chen, X. Tang et al., An analysis of the magnetization behavior and temperature dependence of coercivity in hot deformed Nd2Fe14B magnets with different deformation degrees in The 8th Pacific Rim International Congress on Advanced Materials and Processing (Hawaii, 2013), pp. 1821–1828
H.G. Jiang, J. Li, Y. Liu et al., Research on the deforming uniformity and microstructures of hot-pressed/ hot-deformed NdFeB magnets. J. Magn. Mater. Dev. 4, 24–27 (2014)
M. Lin, H.J. Wang, P.P. Yi et al., Effects of excessive grain growth on the magnetic and mechanical properties of hot-deformed NdFeB magnets. J. Magn. Magn. Mater. 322(15), 2268–2271 (2010)
Z.H. Hu, J. Li, L.H. Chu et al., Effect of hot deformation temperature on the magnetic and mechanical properties of NdFeB magnets prepared by spark plasma sintering. J. Magn. Magn. Mater. 323(1), 104–107 (2011)
S. Sawatzki, I. Dirba, H. Wendrock et al., Diffusion processes in hot-deformed Nd–Fe–B magnets with DyF3 additions. J. Magn. Magn. Mater. 358–359(5), 163–169 (2014)
Z.X. Wang, R.J. Chen, A.R. Yan et al., Near-surface microstructure improvement for die-upset Nd-Fe-B magnets with an enhanced maximum energy product. J. Alloy. Compd. 710, 66–71 (2017)
S. Sawatzki, C. Kübel, S. Ener et al., Grain boundary diffusion in nanocrystalline Nd-Fe-B permanent magnets with low-melting eutectics. Acta Mater. 115, 354–363 (2016)
N. Watanabe, M. Itakura, M. Nishida et al., Microstructure of high coercivity Nd–Fe–Co–Ga–B hot-deformed magnet improved by the Dy diffusion treatment. J. Alloy. Compd. 557(6), 1–4 (2013)
H. Sepehri-Amin, J. Liu, T. Ohkubo et al., Enhancement of coercivity of hot-deformed Nd–Fe–B anisotropic magnet by low-temperature grain boundary diffusion of Nd60Dy20Cu20 eutectic alloy. Scripta Mater. 69(9), 647–650 (2013)
L.H. Liu, H. Sepehri-Amin, T. Ohkubo et al., Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process using Nd62Dy20Al18 alloy. J. Alloy. Compd. 129, 44–47 (2017)
H. Sepehri-Amin, T. Ohkubo, S. Nagashima et al., High-coercivity ultrafine-grained anisotropic Nd–Fe–B magnets processed by hot deformation and the Nd–Cu grain boundary diffusion process. Acta Mater. 61(17), 6622–6634 (2013)
H. Sepehri-Amin, L.H. Liu, T. Ohkubo et al., Microstructure and temperature dependent of coercivity of hot-deformed Nd–Fe–B magnets diffusion processed with Pr–Cu alloy. Acta Mater. 99, 297–306 (2015)
T.G. Woodcock, Q.M. Ramasse, G. Hrkac et al., Atomic-scale features of phase boundaries in hot eformed Nd–Fe–Co–B–Ga magnets infiltrated with a Nd–Cu eutectic liquid. Acta Mater. 77(4), 111–124 (2014)
T.Q. Zhang, F.G. Chen, J. Wang et al., Improvement of magnetic performance of hot-deformed Nd-Fe-B magnets by secondary deformation process after Nd-Cu eutectic diffusion. Acta Mater. 118, 374–382 (2016)
T.Q. Zhang, F.G. Chen, Y. Zheng et al., Anisotropic behavior of grain boundary diffusion in hot-deformed Nd-Fe-B magnet. Scripta Mater. 129, 1–5 (2017)
T. Akiya, J. Liu, H. Sepehri-Amin et al., High-coercivity hot-deformed Nd–Fe–B permanent magnets processed by Nd–Cu eutectic diffusion under expansion constraint. Scripta Mater. 81(24), 48–51 (2014)
H.R. Cha, K.W. Jeon, J.H. Yu et al., Coercivity enhancement of hot-deformed Nd-Fe-B magnet by grain boundary diffusion process using the reaction of NdHx and Cu nanopowders. J. Alloy. Compd. 693, 744–748 (2017)
L.H. Liu, H. Sepehri-Amin, T. Ohkubo et al., Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process. J. Alloy. Compd. 666, 432–439 (2016)
X. Tang, R.J. Chen, W.Z. Yin et al., The magnetization behavior and open recoil loops of hot-deformed Nd-Fe-B magnets infiltrated by low melting point PrNd-Cu alloys. Appl. Phys. Lett. 107(202403), 1–5 (2015)
X. Tang, R.J. Chen, W.Z. Yin et al., Impact of N-Cu diffusion on microstructure and coercivity in hot-pressed and die-upset nanocomposite magnets. Scripta Mater. 88, 49–52 (2014)
U.M.R. Seelam, L.H. Liu, T. Akiya et al., Coercivity of the Nd–Fe–B hot-deformed magnets diffusion-processed with low melting temperature glass forming alloys. J. Magn. Magn. Mater. 412, 234–242 (2016)
Acknowledgements
This research was supported by the Inner Mongolia Autonomous Region Natural Science Foundation (Grant No. 2016BS0513) and Inner Mongolia University of Science and Technology Innovation Foundation (Grant No. 2016QDL-B04).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Lv, K., Dong, R., Zhao, M., Liu, G. (2019). Recent Development of Hot-Pressed-/Deformed Nd–Fe–B Permanent Magnets. In: Han, Y. (eds) Physics and Engineering of Metallic Materials. CMC 2018. Springer Proceedings in Physics, vol 217. Springer, Singapore. https://doi.org/10.1007/978-981-13-5944-6_58
Download citation
DOI: https://doi.org/10.1007/978-981-13-5944-6_58
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-5943-9
Online ISBN: 978-981-13-5944-6
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)