Abstract
Biomass-derived hydrogen (Bio-H2), which is produced through a gasification process, can be used as the fuel in fuel cells. However, impurities such as H2S and HCl produced as by-products during the gasification process can reduce the voltage output and shorten the lifespan of Bio-H2-based fuel cells. Therefore, efficient means of removing H2S produced during the production of Bio-H2 are needed. Generally, the removal of unwanted by-products requires large amounts of metal oxide as an adsorbent, which has a large environmental impact. Here, we examined how to reduce the amount of adsorbent needed for the removal of H2S during the production of Bio-H2. A life cycle assessment approach was then used to assess the environmental impact of removing H2S. For the production of Bio-H2 at low temperatures, adsorption of H2S with Fe2O3 and ZnO was found to be promising. We also found that the Bio-H2 could be further purified by replacing the conventional pressure swing adsorption process with a two-step process. In our novel Bio-H2 production process, the H2S removal performance of the entire process was comparable with that of a conventional process. Moreover, our novel process had 91% less impact on the life cycle assessment index abiotic depletion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ministry of Agriculture, Forestry and Fisheries of Japan. The basic biomass utilization promotion plans; 2010.
Dunn S. Hydrogen futures: toward a sustainable energy system. Int J Hydrog Energy. 2002;27(3):235–64.
Kalinci Y, Hepbasli A, Dincer I. Life cycle assessment of hydrogen production from biomass gasification systems. Int J Hydrog Energy. 2012;37(19):14026–39.
Dowaki K, Ohkubo R, Koido K, Ikeda H, Kameyama M. The actual status and the prospect of Blue Tower Gasification Technology. J Jpn Inst Energy. 2012;91(10):1035–46. in Japanese.
ISO 14687-2:2012. Hydrogen fuel product specification part 2: proton exchange membranes (PEM) fuel cell applications for road vehicles. 2012.
Van der Drift A, Van Doorn J, Vermeulen JW. Ten residual biomass fuels for circulating fluidized-bed gasification. Biomass Bioenergy. 2001;20(1):45–56.
Novochinskii II, Song C, Ma X, Liu X, Shore L, Lampert J, Farrauto RJ. Low-temperature H2S removal from steam-containing gas mixtures with ZnO for fuel cell application. 1. ZnO particles and extrudates. Energy Fuel. 2004;18(2):576–83.
Wang J, Guo J, Parnas R, Liang B. Calcium-based regenerable sorbents for high temperature H2S removal. Fuel. 2015;154:17–23.
Dowaki K, Nagaishi T, Koido K, Kameyama M. A proposal of a highly-efficient purification system for hydrogen production to achieve a lower LCCO2 level. J Jpn Inst Energy. 2016;95(8):615–20.
Carnes CL, Klabunde KJ. Unique chemical reactivities of nanocrystalline metal oxides toward hydrogen sulfide. Chem Mater. 2002;14(4):1806–11.
Westmoreland PR, Harrison DP. Evaluation of candidate solids for high-temperature desulfurization of low-Btu gases. Environ Sci Technol. 1976;10(7):659–61.
Oliphant JL, Fowler RW, Pannell RB, Bartholomew CH. Chemisorption of hydrogen sulfide on nickel and ruthenium catalysts: I. Desorption isotherms. Catalysis. 1978;51(2):229–42.
Dolan MD, Ilyushechkin AY, McLennan KG, Sharma S. Sulfur removal from coal-derived syngas: thermodynamic considerations and review. Asia-Pacific J Chem Eng. 2012;7(1):1–13.
Lutz W, Suckow M, Bülow M. Adsorption of hydrogen sulphide on molecular sieves: No enrichment in the presence of carbon dioxide. Gas Sep Purif. 1990;4(4):190–6.
Rhodes C, Hutchings GJ, Ward AM. Water-gas shift reaction: finding the mechanistic boundary. Catal Today. 1995;23(1):43–58.
Rosso I, Galletti C, Bizzi M, Saracco G, Specchia V. Zinc oxide sorbents for the removal of hydrogen sulfide from syngas. Ind Eng Chem Res. 2003;42(8):1688–97.
Dowaki K, Katayama N, Nagaishi T, Kuroda S, Kameyama M. A system analysis of storage alloy for Bio-H2 in consideration of the purification performance. J Jpn Inst Energy. 2017;96:266–72.
Hashimoto S, Obara T, Terashima Y. Evaluation of demolition wood waste recycling from environmental aspect. Doboku Gakkai Ronbunshu. 2000;643:37–48. in Japanese.
Watanabe Y, Sato Y, Kawano D, Koido K, Dowaki K. A life cycle assessment of the biomass-to-liquid considering the fuel consumption of a truck. J LCA Jpn. 2013;9(1):20–36. in Japanese.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Kuroda, S., Ishiyama, T., Kondo, S., Kameyama, M., Seo, Y., Dowaki, K. (2019). Life Cycle Assessment-Directed Optimization of Hydrogen Sulfide Removal During Biomass-Derived Hydrogen Production. In: Hu, A., Matsumoto, M., Kuo, T., Smith, S. (eds) Technologies and Eco-innovation towards Sustainability II. Springer, Singapore. https://doi.org/10.1007/978-981-13-1196-3_9
Download citation
DOI: https://doi.org/10.1007/978-981-13-1196-3_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-1195-6
Online ISBN: 978-981-13-1196-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)