Abstract
The Gr9 ϕ20 × 0.3 mm alloy tube with high-quality small size extra-thin walls was manufactured in this paper. The surface quality of the tube was improved by controlling the surface quality of the extruded tube and the intermediate tube and adjusting the clearance between the mandrel and the tube. The methods of controlling the rolling deformation and Q value and annealing temperature were adopted to solve the matching problem on comprehensive performance of Gr9 titanium alloy tube. The measure of controlling the tube size deviation and the rolling feed were taken to obtain high-precision finished tube. The result shows that the Gr9 titanium alloy finished tube manufactured by this process has high strength and high plasticity.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Li Nan, Yashe Yang, Yuanhao Qi et al. Rolling Process of High-strength TA18 Titanium Alloy Tubes for Aviation, Rare Metal Materials and Engineering. 42(1) (2013) 166–167.
Jinhui Xi, Yashe Yang, Li Nan et al. Manufacture of TA18 Titanium Alloy Tubes Used in Aerial Tube, Titanium Industry Progress. 28(5) (2011) 34–36.
Zhibing Chu, Dong Wei, Yanlong Yang et al. Influence and Verification of Different Feed Ranges on Cold Pilgering, Chinese Journal of Engineering. 39(5) (2017) 747–755.
Jianglin Liu, Weidong Zeng, Zilong Du et al. The Influence Rule of Rolling Process Parameters on Metal Flow and Forming Load of TA18 Alloy Tube During Cold Rolling, Titanium Industry Progress. 32(3) (2015) 21–24.
Zhibing Chu, Yangyang Lu, Qingxue Huang et al. Establishment and Verification of Pilger Mill Cold Rolled Stainless Steel Tube Springback Prediction Model, Journal of Sichuan University. 47(2) (2015) 165–167.
Liang Huang, Zhe Xu, Chun Dai et al. Three-dimensional FE Simulation of Multi-strokes Pilgering Cold Roll of TA18 Titanium Alloy Tube: II Analysis of Plastic Deformation Behavior, Rare Metal Materials and Engineering. 42(3) (2013) 524–528.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chen, S., Li, X., Xu, D. (2018). Manufacture of Gr9 Titanium Alloy Tube for Small Size and Extra-Thin Wall. In: Han, Y. (eds) High Performance Structural Materials. CMC 2017. Springer, Singapore. https://doi.org/10.1007/978-981-13-0104-9_56
Download citation
DOI: https://doi.org/10.1007/978-981-13-0104-9_56
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0103-2
Online ISBN: 978-981-13-0104-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)