Abstract
This chapter lays the basis for the rest of this thesis. A thorough analysis is first performed on the MMF produced by different FSCW configurations, based on which, FSCW stators are classified into “classes” and “categories”, each of them with their own distinct features. Lumped equations are then proposed for different stator categories. The harmonic winding factors of the different FSCW stator categories are then formulated based on which the flux linkages and back-EMFs are calculated. A case-study is then investigated to evaluate the application of the proposed equations in the selection process for the most appropriate slot and pole combination for application-oriented FSCW stators.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
R. Islam, I. Husain, A. Fardoun, K. McLaughlin, Permanent-magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction. IEEE Trans. Ind. Appl. 45, 152–160 (2009)
Z.Q. Zhu, D. Howe, Influence of design parameters on cogging torque in permanent magnet machines. IEEE Trans. Energy Convers. 15, 407–412 (2000)
C. Sadarangani, Electrical Machines-Design and Analysis of Introduction and Permanent Magnet Motors (2006)
J.A. Guemes, A.M. Iraolagoitia, P. Fernández, M.P. Donsio, et al., Comparative study of PMSM with integer-slot and fractional-slot windings, in 2010 XIX International Conference on Electrical Machines (ICEM) (2010), pp. 1–6
K.-H. Shin, J.-S. Yu, J.-Y. Choi, H.-W. Cho, Design and analysis of interior permanent magnet synchronous motor considering saturated rotor bridge using equivalent magnetic circuit. J. Magn. 19, 404–410 (2014)
P.C. Krause, O. Wasynczuk, S.D. Sudhoff, S. Pekarek, Analysis of Electric Machinery and Drive Systems, vol. 75 (Wiley, 2013)
K. Huilin, Z. Libing, W. Jin, Harmonic winding factors and MMF analysis for five-phase fractional-slot concentrated winding PMSM, in 2013 International Conference on Electrical Machines and Systems (ICEMS) (2013), pp. 1236–1241
M. Farshadnia, R. Dutta, J.E. Fletcher, K. Ahsanullah, M.F. Rahman, H.C. Lovatt, Analysis of MMF and back-EMF waveforms for fractional-slot concentrated-wound permanent magnet machines, in Proceedings of the ICEM (2014), pp. 1976–1982
L. Alberti, M. Barcaro, N. Bianchi, Design of a low-torque-ripple fractional-slot interior permanent-magnet motor. IEEE Trans. Ind. Appl. 50, 1801–1808 (2014)
N. Bianchi, S. Bolognani, M.D. Pre, G. Grezzani, Design considerations for fractional-slot winding configurations of synchronous machines. IEEE Trans. Ind. Appl. 42, 997–1006 (2006)
J. Pyrhonen, T. Jokinen, V. Hrabovcová, Design of Rotating Electrical Machines (Wiley, 2009)
A.O. Di Tommaso, F. Genduso, R. Miceli, A software for the evaluation of winding factor harmonic distribution in high efficiency electrical motors and generators, in Proceedings of the EVER (2013), pp. 1–6
R.F. Burbidge, A rapid method of analysing the m.m.f. wave of a single or polyphase winding. Proc. IEE Part C: Monogr. 105, 307–311 (1958)
E. Fornasiero, N. Bianchi, S. Bolognani, Slot harmonic impact on rotor losses in fractional-slot permanent-magnet machines. IEEE Trans. Ind. Electron. 59, 2557–2564 (2012)
N. Bianchi, E. Fornasiero, Index of rotor losses in three-phase fractional-slot permanent magnet machines. Electr. Power Appl. IET 3, 381–388 (2009)
A.M. El-Refaie, Fractional-slot concentrated-windings synchronous permanent magnet machines: opportunities and challenges. IEEE Trans. Ind. Electron. 57, 107–121 (2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Farshadnia, M. (2018). Analytical Modelling of Stator Magnetic Characteristics in Fractional-Slot Concentrated-Wound Permanent Magnet Machines. In: Advanced Theory of Fractional-Slot Concentrated-Wound Permanent Magnet Synchronous Machines. Springer Theses. Springer, Singapore. https://doi.org/10.1007/978-981-10-8708-0_2
Download citation
DOI: https://doi.org/10.1007/978-981-10-8708-0_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8707-3
Online ISBN: 978-981-10-8708-0
eBook Packages: EngineeringEngineering (R0)