Abstract
Aiming at the fracture mechanics problem of rock material in petroleum engineering, fully illustrated theory of Debond technique is used to simulate and calculate crack propagation in ABAQUS software, and its fracture criterion based on fracture mechanics was introduced. The equivalent domain integral method of calculating stress intensity factor was introduced. The finite element model of rock fracture mechanics of type-I crack was established by Debond technique, and then static stress intensity factor of type-I crack at pure stress boundary condition was simulated and contrasted with analytic solution, which verified the rationality of numerical results. Finally, dynamic stress intensity factor of type-I crack was calculated with increase in loading and crack’s size and accurately predicted the critical stress in the two directions of the simulated rock. The results showed that ABAQUS Debond technique can simulate the fracture mechanics parameters of rock material, and it can effectively describe the fracture mechanics characteristics of rock.
Keywords
Copyright 2017, Shaanxi Petroleum Society.
This paper was prepared for presentation at the 2017 International Field Exploration and Development Conference in Chengdu, China, 21–22 September 2017.
This paper was selected for presentation by the IFEDC&IPPTC Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the IFEDC&IPPTC Committee and are subject to correction by the author(s). The material does not necessarily reflect any position of the IFEDC&IPPTC Committee, its members. Papers presented at the Conference are subject to publication review by Professional Committee of Petroleum Engineering of Shaanxi Petroleum Society. Electronic reproduction, distribution, or storage of any part of this paper for commercial purposes without the written consent of Shaanxi Petroleum Society is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of IFEDC&IPPTC. Contact email: paper@ifedc.org or paper@ipptc.org.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Gidley JL et al (1995) The new development of hydraulic fracturing technology. Petroleum Industry Press, Beijing
Zhou B, Sun B, Xue S (2016) Extended finite element method for fracture mechanics of rock. J China Pet Univ (Nat Sci Ed) 40(4):121–126
Rybicki EF, Kanninen MF (1977) A finite element calculation of stress intensity factors by a modified crack closure integral. Eng Fract Mech 9:931–938
Irwin GR (1956) One set of fast crack propagation in high strength steel and aluminum alloys. Sagamore Res Conf Proc 2:289–305
Fan T (2003) Basis of fracture theory. Petroleum Industry Press, Beijing
Zhao L (2009) Finite element analysis of dynamic fracture toughness test of rock material. Anhui University of Science and Technology, Hefei
Moura B, Shih CF (1987) A treatment of crack tip contour integrals. Int J Fract 35:295–310
Shivakumar KN, Raju IS (1992) An equivalent domain integral method for three-dimensional mixed-mode fracture problem. Eng Fract Mech 42:935–959
Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 35:379–386
Xie D et al (2009) Numerical calculation method of fracture mechanics and the engineering application. Science Press, Beijing
Lou Y, Chen M, Shi M, Wang H (2007) Measurement of type-I and type-II fracture toughens for rocks and its influence factors analysis. J China Pet Univ (Nat Sci Ed) 31(4):85–89
Acknowledgements
This work was financially supported by National Natural Science Foundation of China (Grant No. 51604225) and Scientific Research Plan Projects of Xi’an Education Department (14JK1583).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Han, J., Ma, D., Ju, Y., Zhao, K., Xu, Y., Gao, S. (2019). Application of Debond Technique in Rock Fracture Mechanics. In: Qu, Z., Lin, J. (eds) Proceedings of the International Field Exploration and Development Conference 2017. Springer Series in Geomechanics and Geoengineering. Springer, Singapore. https://doi.org/10.1007/978-981-10-7560-5_159
Download citation
DOI: https://doi.org/10.1007/978-981-10-7560-5_159
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7559-9
Online ISBN: 978-981-10-7560-5
eBook Packages: EngineeringEngineering (R0)