Abstract
Ceramics are being introduced into production engines for both wear resistance and inertial response, as well as for thermal barrier and elevated temperature capability. The selection of both materials and lubricants for future generations of engines will be influenced by the demands for efficient, environmentally sound, and minimally serviced but long-lived operation. The long-term tribological response of the selected materials is a significant issue which does not generally receive sufficient attention. An experimental approach to the evaluation of the long term-wear response of engine candidate ceramics, based on an earlier wear mode transition diagram, is discussed in this paper. Data are presented for initial studies of a silicon carbide whisker-silicon nitride composite.
Research sponsored by the U.S. Department of Energy, Assistant Secretary for Conservation and Renewable Energy, Office of Transportation Materials, Tribology Program, under contract DE-AC05-84OR21400 with Martin Marietta Energy Systems, Inc.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
R. Kamo, M. Woods, and P. Sutor, Development of Tribological System and Advanced High-Temperature In-cylinder Components for Advanced HighTemperature Oiesel Engines, in Proc. 1987 Coatings for Adv. Heat Engines Workshop, July 27-30, Castine, ME, USDOE, Conf-870762.
J. Breznak, E. Breval, and N. H. Macmillan, “Sliding Friction and Wear of Structural Ceramics,” J. Mater. Sci. 20 (1985) 4657–4680.
P. A. Gaydos and K. F. Dufrane, “Studies of Dynamic Contact of Ceramics and Alloys for Advanced Heat Engines,” in Proc. 27th Automotive Technology Development Contractor’s Coordination Meeting, Oct. 23-26, 1989, SAE, Warrendale, PA, 1990, pp 149–153.
R. R. Wills and R. E. Southam, “Ceramic Engine Valves,” in Ceramic Materials and Components for Engines, Nov. 27–30, 1988, American Ceramic Society, 1989, pp.
J. C. Bentz, T. M. Yonushonis, T. Aoba and Y. Fujimoto, “Silicon Nitride Ceramic Wear Resistant Machine Elements,” ibid., pp. 1489–1494.
M. Kano and I. Tanimoto, Wear Mechanism of High Wear-Resistant Materials for Automotive Valve Trains, in Wear of Materials — 1991, ed K. C. Ludema and R. G. Bayer, ASME, New York, 1991, pp. 83–89.
C. D. Weiss, Wear Resistant Coatings, in Ceramic Technology for Advanced Heat Engines Project Semiannual Progress Report, ORNL/TM-11719, pp. 194–199.
M. G. S. Naylor, Development of Wear Resistant Ceramic Coatings for Diesel Engine Components, Ibid, pp. 200–227.
M. G. S. Naylor, “Wear Resistant Ceramic Coatings,” in Proc. Annual Automotive Technology Development Contractors’ Meeting, Soc. Auto. Engrs., Warrendale, PA, 1991, pp. 273–281.
H. E. Sliney and C. DellaCorte, “Tribological Prperties of PM212: A High Temperature, Self-Lubricating Powder Metallurgy Composite,” Lubr. Engrg., 47(4) 298–303, 1991.
E. E. Klaus, A Study of Tricresyl Phosphate as a Vapor Delivered Lubricant, Lubr. Eng., 45(11) 717–723, 1989.
J. L. Lauer, Continuous High-Temperature Lubrication of Ceramics by Carbon Generated Catalytically, in Material Research Society Symposium Proceedings, Vol 140 (New Material Approaches to Tribology], 1989, pp. 363–368.
C. R. Blanchard and R. A. Page, Effect of Silicon Carbide Whisker and Titanium Carbide Particulate Additions on the Friction and Wear Behavior of Silicon Nitride, J. Am. Ceram. Soc., 73(11) 3442–52, 1990.
C. R. Blanchard and R. A. Page, Effect of Particulate Additions on the Contact Damage Resistance of Hot-Pressed Si3N4, J. Mater. Sci., 23, 946–957, 1988.
O. O. Ajayi, A. Erdimir, J.-H. Hsieh, R. A. Erck, and F. A. Nichols, Boundary Lubrication of Ceramic Materials by Soft Metallic Coating and Synthetic Oil, this volume.
M. J. Furey and C. Kajdas, Tribopolymerization as a Novel Approach to Ceramic Lubrication, this volume.
C. S. Yust, Wear Transition Surfaces for Long-Term Wear Effects, in Tribological Modeling for Mechanical Designers, ed. K. C. Ludema and R. G. Bayer, ASTM-STP 1105, 1991, pp 153–161.
A P. Nikkila and T. A. Mantyla, “Cyclic Fatigue of Silicon Nitride,” Ceram. Eng. Sci. Proc., 10(7–8) 646–656, 1989.
R. H. Dauskardt, D. B. Marshall, and R. O. Ritehie, “Cydie Fatigue-Crack Propagation in Magnesia-Partially-Stabilized Zireonia Ceramics,” J. Amer. Cer. Soc., 73(4) 893–903, 1990.
S. Suresh and R. O. Ritchie, “Propagation of Short Fatigue Cracks,” Intl. Met. Rev., 29(6) 445–453, 1984.
A. W. J. de Gee, A Begelinger, and G. Salomon, “Lubricated Wear of Steel Point Contaets — Application of the Transition Diagram,” in Wear of Naterials — 1983, ed K. C. Ludema, ASME, New York, 1983, pp. 534–540.
T. N. Tiegs, J. W. Geer, P. D. Tennis, and S. M. Leahy, Ceramic Technology for Advanced Heat Engines Project Semiannual Progress Report for April Through September 1988, Oak Ridge National Laboratory, ORNL/TM-11116, pp 92–97, 1989.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1992 Elsevier Science Publishers Ltd and MPA Stuttgart
About this chapter
Cite this chapter
Yust, C.S. (1992). Material and Lubricant Relationships in the Tribology of Internal Combustion Engines. In: Carlsson, R., Johansson, T., Kahlman, L. (eds) 4th International Symposium on Ceramic Materials and Components for Engines. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-2882-7_8
Download citation
DOI: https://doi.org/10.1007/978-94-011-2882-7_8
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-85166-776-5
Online ISBN: 978-94-011-2882-7
eBook Packages: Springer Book Archive