Skip to main content

Cyclic Fatigue of Silicon Nitrides and a Whisker-Reinforced Silicon Nitride

  • Chapter
  • 7 Accesses

Abstract

Cyclic stresses derived from mechanical loads or temperature changes are common in engines. Compression-tension cycling is recently found to degradate the mechanical properties of common engineering ceramic materials. In this study, the cyclic fatigue behaviour of sintered and hot-pressed silicon nitride is compared to the behaviour of SiC-whisker- reinforced silicon nitride. Alternating cyclic testing, R=−1, was done by using modified four-point bending arrangement. Cycling resulted in clear degradation of mechanical properties in all materials studied. The composite structure had different behaviour as compared to the monolithic materials showing a bimodal behaviour with little degradation at low cycle area but increased degradation at high cycle area. The results of the test are presented and the behaviour is interpreted and discussed based on the results of fractographic analysis.

This is a preview of subscription content, log in via an institution.

Buying options

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   39.99
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD   54.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Evans, A.G., Fatigue in ceramics, Int. J. of Fracture. 1980, 16, 485–98.

    Article  Google Scholar 

  2. Kawakubo, T. and Komeya, K., Static and Cyclic Fatigue Behavior of a Sintered Silicon Nitride at Room Temperature, J. Am. Ceram. Soc.. 1987, 70, 400–405.

    Article  Google Scholar 

  3. Dauskardt, R.H., Yu, W., and Ritchie, R.O., Fatigue Crack Propagation in Transformation-Toughened Zirconia Ceramic, J. Am. Ceram. Soc.. 1987, 70, C248–52.

    Article  Google Scholar 

  4. Reece, M.J., Guiu, F., and Sammur, M.F.R., Cyclic Fatigue Crack Propagation in Alumina under Direct Tension-Compression Loading, J. Am. Ceram. Soc.. 1989, 72, 348–52.

    Article  Google Scholar 

  5. Gratwohl, G., Ermudung von Keramik unter Schwingbeanspruchung, Mat.-wiss. u. Werkstoffiech.. 1988, 19, 113–24.

    Article  Google Scholar 

  6. Horibe, S., Fatigue of Silicon Nitride Ceramics under Cyclic Loading, J. Europ. Ceram. Soc., 1990, 6, 89–95.

    Article  Google Scholar 

  7. Masuda, M., Soma, T., Matsui, M., and Oda, I., Cyclic Fatigue of Sintered Si3N4, Ceram. Eng. Proc.. 1988, 9, 1371–82.

    Article  Google Scholar 

  8. Nikkilä, A.-P. and Mäntylä, T.A., Cyclic Fatigue of Silicon Nitrides. Ceram. Eng. Sci. Proc.. 1989, 10, 646–56.

    Article  Google Scholar 

  9. Masuda, M., Soma, T., and Matsui, M., Cyclic Fatigue Behavior of Si3N4 Ceramics, J. Europ. Ceram. Soc.. 1990, 6, 253–58.

    Article  Google Scholar 

  10. Akimune, Y., Katano, Y., and Matoba, K., Spherical-Impact Damage and Strength Degradation in Silicon Carbide Whisker/Silicon Nitride Composite, J. Am. Ceram. Soc. 1989, 72, 791–98.

    Article  Google Scholar 

  11. Nose, T. and Fujii, T., Evaluation of Fracture Toughness for Ceramic Materials by a Single-Edge-Precracked-Beam Method, J. Am. Ceram. Soc., 1988, 71, 328–33.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 1992 Elsevier Science Publishers Ltd and MPA Stuttgart

About this chapter

Cite this chapter

Mäntylä, T.A., Nikkilä, AP., Vuorinen, P.T., Enoki, M., Kishi, T. (1992). Cyclic Fatigue of Silicon Nitrides and a Whisker-Reinforced Silicon Nitride. In: Carlsson, R., Johansson, T., Kahlman, L. (eds) 4th International Symposium on Ceramic Materials and Components for Engines. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-2882-7_48

Download citation

  • DOI: https://doi.org/10.1007/978-94-011-2882-7_48

  • Publisher Name: Springer, Dordrecht

  • Print ISBN: 978-1-85166-776-5

  • Online ISBN: 978-94-011-2882-7

  • eBook Packages: Springer Book Archive

Publish with us

Policies and ethics