Zusammenfassung
New legislation and the demand to increase the effective efficiency of the propulsion, require an always far-reaching optimization of the complete powertrain. In addition, nitrogen oxide emissions from internal combustion engines have recently been subject to strong public perception and discussion, which has put additional pressure on legislation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
Kovács, D.; Gehrke, S. und Eilts P.: „Potential von Luftpfadvariabilitäten am Nfz-Motor zur Leistungssteigerung bei Optimierung des Schadstoff- und des CO2-Ausstoßes“ FVV Abschlussbericht, Heft Nr. 1060, Frankfurt am Main, 2015
Hirschmann, S.; Malischewski, T; Haubold, U.; Tilch, B.: „Variable Valve Trains in Heavy Duty Engines – Benefit and Design“ 11th International MTZ Conference on Heavy-Duty Engines, Ulm, 2016
Weberskirch, D.; Hyna, D.; Malischewski, T.; Hirschmann, S.: „Variable Ventiltriebe in Heavy-Duty-Motoren – ermittelte Potenziale mit Miller Steuerzeiten“ 10. MTZ Fachtagung Ladungswechsel im Verbrennungsmotor, Stuttgart, 2017
Theißl, H.; Kraxner, T.; Seitz, H. F.; Kislinger, P.: „Miller-Steuerzeiten für zukünftige Nutzfahrzeug-Dieselmotoren“ MTZ Jahrgang 76, Seite 18-25, 2015
Hermann, H.-O.; Nielsen, B.; Gropp, C.; Lehmann, J.: „Mittelschwerer Nfz-Motor von Mercedes-Benz Teil 1: Motor- und Abgasreinigungskonzept“ MTZ Jahrgang 73, Seite 730-738, 2012
Diezemann, M.; Pohlke, R.; Brauer, M.; Severin, C.: “Increasing exhaust gas temperature in the diesel engine using a variable valve train”; MTZ 04/2013, Seite 308-315, 2013
Ramesh, A., Gosala, D., Allen, C., Joshi, M. et al.: “Cylinder Deactivation for Increased Engine Efficiency and Aftertreatment Thermal Management in Diesel Engines” SAE Technical Paper 2018-01-0384, 2018
Jacobs Vehicle Systems „Jacobs to Introduce Cylinder Deactivation (CDA) Technology at IAA Commercial Vehicles Trade Fair” https://www.jacobsvehiclesystems.com, 2018
Konrad, J.; Lauer, T.; Moser, M.; Lockner, E.; Zhu, J.: „Investigation of the cylinder cut-out for medium-speed dual fuel engines” 12th International MTZ Conference on Heavy-Duty Engines, 2017
Franke, S.; Hartwig, K.-H.; Findeisen, B.; Meissner, C.: Kopplung von Mechanik und Thermodynamik zur realitätsnahen Abbildung von transienten Betriebszuständen im hybriden Antriebsstrang“ 20. MTZ Fachtagung Simulation und Test, 2018
Weise, M.; Neukirchner, H.; Hartwig, K.-H.; Franke, S.; Werler, A.: „Engine dynamic simulation and calculation of friction“ 2nd APL Tribology Symposium, Landau, 2015
Himstedt, J.; Altherr, P.; Ihne, T.; Schneider, S.: „Variable valve actuation in commercial engines using a lift switching rocker arm” 12th International MTZ Conference on Heavy-Duty Engines, 2017
“Audi valvelift system” https://www.audi-mediacenter.com
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature
About this paper
Cite this paper
Franke, S., Parsche, U., Schreiter, C., George, T. (2019). Holistic design process for new commercial application engine concepts. In: Siebenpfeiffer, W. (eds) Heavy-Duty-, On- und Off-Highway-Motoren 2018. Proceedings. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-25889-4_19
Download citation
DOI: https://doi.org/10.1007/978-3-658-25889-4_19
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-25888-7
Online ISBN: 978-3-658-25889-4
eBook Packages: Computer Science and Engineering (German Language)