Abstract
Standard studies of the lubricants tribological properties are carried out on a four-ball friction machine. The friction unit of such machine is the same diameter contacting steel ball pyramid. To provide normal operation of this unit, it is necessary to ensure the upper pyramid ball stable sliding over the three lower fixed ball bearings. Other friction unit balls movements and displacements are unacceptable. Creating a calculation model friction unit makes it possible to determine such conditions. These model static equilibrium equations are the basis of the friction unit balls. Recording equilibrium equations with subsequent solution allows to perform analysis of the friction unit parts geometrical parameters effect onto stable operating conditions and to determine the optimum values of these parameters. The results can be used to create new laboratory facilities for the of the lubricants tribological properties study and to improve this four-ball machine.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kragel’skiy IV (1968) Treniye i iznos. (Friction and wear). Mashinostroyeniye, Moscow
Chichinadze AV (2001) Osnovy tribologii (Fundamentals of tribology). Mashinostroyeniye, Moscow
Chichinadze AV (2003) Treniye, iznos i smazka. Tribologiya i tribotekhnika (Friction, wear and grease. Tribology and tribotechnics). Mashinostroyeniye, Moscow
Garkunov DN (1989) Tribotekhnika (Tribotechnics). Mashinostroyeniye, Moscow
Chichinadze AV, Khebdy M (1990) Spravochnik po tribotekhnike (Handbook of tribotechnics). Mashinostroyeniye Varshava VKL, Moscow
Braun ED, Buyanovskiy IA, Voronin NA et al (2008) Sovremennaya tribologiya: Itogi i perspektivy (Modern tribology: results and prospects). Izdatel’stvo ZHI, Moscow
Bowden FP, Tabor D (1980) Treniye i smazka (Friction and lubrication). Mashgiz, Moscow
Matveyevsky RM (1989) Smazochnyye materialy. Antifriktsionnyye i protivoiznosnyye svoystva. Metody ispytaniy: Spravochnik (Lubricants. Anti-friction and anti-wear properties. Test methods: handbook). Mashinostroyeniye, Moscow
Chkhetiani PD (2009) Issledovaniye tribokharakteristik smazochnykh materialov (sovremennyye trebovaniya) (Study tribo-characteristics of lubricants (modern requirements)). Mashinostroyeniye, Moscow
Kombalov BC, Frolova KV (2008) Metody i sredstva ispytaniy na treniye i iznos konstruktsionnykh i smazochnykh materialov: spravochnik (Methods and means of testing for friction and wear of structural and lubricating materials: a handbook). Mashinostroyeniye, Moscow
Buyanovskii IA (1994) Tribological test methods and apparatus. Chem Technol Fuels Oils 30(3):133–137
Darovskoy EV (20090 Kratkiy istoricheskiy obzor razvitiya tribologicheskikh ispytaniy na mashinakh treniya (A brief historical review of the development of tribological tests on friction machines). Trudy RGUPS, Rostov
Braun ED, Evdokimov YA, Chichinadze AV (1982) Modelirovaniye treniya i iznashivaniya v mashinakh (Modeling of friction and wear in machines). Mashinostroyeniye, Moscow
Pruzhansky LY (1978) Issledovaniya metodov ispytaniy na iznashivaniye (Testing methods investigations for wear). Nauka, Moscow
Kragel’skiy IV (1984) Raschetno-eksperimental’nyye metody otsenki treniya i iznosa (Calculation-experimental methods for estimating friction and wear). Mashinostroyeniye, Moscow
Chudakov EA (1946) Laboratornyye mashiny dlya ispytaniy na iznashivaniye. Entsiklopedicheskiy spravochnik. Mashinostroyeniye (Laboratory testing machines for wear. Encyclopedic reference book. Mechanical engineering). Gosudarstvennoye nauchno-tekhnicheskoye izdatel’stvo mashinostroitel’noy literatury, Moscow
Braun ED, Simushkovich BP (1984) Sovremennyye i seriynyye mashiny treniya (Modern and serial friction machines). Institut mekhaniki metallopolimernykh system, Belarus’, Gomel’
Smushkovich BL (2010) O nekotorykh napravleniyakh razvitiya mashin treniya (On some directions of the development of friction machines). Mashinostroyeniye, Moscow
Chichinadze AB et al (1977) Treniye i iznos friktsionnykh materialov. Razrabotka kriteriyev otsenki mashin dlya modelirovaniya treniya i iznosa (Friction and wear of friction materials. Development of evaluation criteria for machines for modeling friction and wear). Nauka, Moscow
GOST 9490-75* Materialy smazochnyye zhidkiye i plastichnyye. Metod opredeleniya tribologicheskikh kharakteristik na chetyrekhsharikovoy mashine (Lubricating liquid and plastic materials. Method for determining tribological characteristics on a four-ball machine)
GOST ISO 20623-2013 Nefteprodukty. Zhidkiye smazochnyye materialy. Opredeleniye protivozadirnykh i protivoiznosnykh svoystv s ispol’zovaniyem chetyrekhsharikovoy mashiny (yevropeyskiye usloviya) (Petroleum products. Liquid lubricants. Determination of extreme pressure and anti-wear properties using a four-ball machine (European conditions))
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Antimonov, A.M., Pushkareva, N.B., Reshetnikov, E.G. (2019). Four-Ball Machine Friction Unit Geometrical Parameters. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_83
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_83
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)