Abstract
The authors made a computational study of forced oscillations of a straight pipe with a flowing fluid under an external driving force using beam model. The phase shift of the oscillations of two points of the tube was obtained considering the noncentral application of the driving force and the asymmetry of the location of the sensors. The approach proposed was aimed at solving the problem of forced oscillations of a beam with a flowing fluid. It enables to use the beam modal shapes with a standing fluid found by the finite element method. The equation of transverse vibrations of a beam with a flowing fluid with an allowance for internal friction on the tube material was proposed. The allowance for friction on the tube material made it possible to solve the problem of forced resonance oscillations of a beam with a flowing fluid in a nonstationary formulation. The results obtained on the beam model were verified using a three-dimensional finite element model of a straight pipe with the flowing fluid. The results obtained can be used in prototyping Coriolis flowmeters.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Naguleswaran S, Williams CJH (1968) Lateral vibration of a pipe conveying a fluid. J Mech Eng Sci 10(3):228–238
Chieu C-T (1970) Bending vibrations of a pipe line containing flowing fluid. Dissertation, Kansas State University
Stein RA, Tobriner MW (1970) Vibration of pipes containing flowing fluids. ASME
Cascetta F, Della Valle S, Guido AR et al (1991) A new straight pipe Coriolis mass flowmeter: the experimental characterization. Measurement 9(4):176–180
Paidoussis MP, Li GX (1993) Pipes conveying fluid: a model dynamical problem. J Fluids Struct 7(2):137–204
Hulbert GM, Darnell I, Brereton GJ (1995) Numerical and experimental analysis of Coriolis mass flowmeters. AIAA Technical Paper, AIAA-95-1384-CP
Kutin J, Bajsić I (2014) Fluid-dynamic loading of pipes conveying fluid with a laminar mean-flow velocity profile. J Fluids Struct 50:171–183
Clark C, Cheesewright R (2003) The influence upon Coriolis mass flow meters of external vibrations at selected frequencies. Flow Meas Instrum 14(1):33–42
Wang S, Clark C, Cheesewright R (2006) Virtual Coriolis flow meter: a tool for simulation and design. Proc Inst Mech Eng Part C: J Mech Eng Sci 220(6):817–835
Cheesewright R, Shaw S (2006) Uncertainties associated with finite element modelling of Coriolis mass flow meters. Flow Meas Instrum 17(6):335–347
Wang T, Baker RC, Hussain Y (2006) An advanced numerical model for single straight tube Coriolis flowmeters. J Fluids Eng 128(6):1346–1350
Gao PX, Zhai JY, Qu FZ et al (2017) Vibration and damping analysis of aerospace pipeline conveying fluid with constrained layer damping treatment. Proc Inst Mech Eng Part G: J Aerosp Eng
Enz S (2010) Effect of asymmetric actuator and detector position on Coriolis flowmeter and measured phase shift. Flow Meas Instrum 21(4):497–503
Thomsen JJ, Dahl J (2010) Analytical predictions for vibration phase shifts along fluid-conveying pipes due to Coriolis forces and imperfections. J Sound Vib 329(15):3065–3081
Enz S, Thomsen JJ, Neumeyer S (2011) Experimental investigation of zero phase shift effects for Coriolis flowmeters due to pipe imperfections. Flow Meas Instrum 22(1):1–9
Binulal BR, Rajan A, Unnikrishnan M et al (2016) Experimental determination of time lag due to phase shift on a flexible pipe conveying fluid. Measurement 83:86–95
Mironov MA, Pyatakov PA, Andreev AA (2010) Forced bending vibrations of a pipe with a liquid flow. Acoust J 56(5):684–692
Kutin J, Bajsić I (2002) An analytical estimation of the Coriolis meter’s characteristics based on modal superposition. Flow Meas Instrum 12(5):345–351
Biderman VL (1980) Teoriya mekhanicheskikh kolebaniy (Theory of mechanical vibrations). Vysshaya shkola, Moscow
Beskachko VP, Romanov VA (2018) The simulation of Coriolis flow meter tube movements excited by fluid flow and exterior harmonic force. In: Advanced mathematical and computational tools in metrology and testing XI (in press)
Beskachko VP, Romanov VA (2018) Virtual prototyping experience of the Coriolis flowmeter. In: Lecture notes in mechanical engineering (in press)
Acknowledgements
This work was conducted with the financial support of the Ministry of Education and Science of the Russian Federation. Agreement No. 14.578.21.0191 from 03.10.2016. Unique identifier of the Applied Scientific Research is RFMEFI57816X0191.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Taranenko, P.A., Telegin, D.V., Romanov, V.A. (2019). Analysis of Forced Bending Vibrations of Straight Pipe with Flowing Fluid. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_73
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_73
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)