Abstract
This paper considers the input of ideal failure models of structures for solution of algebraic set of equations by means of iterative process when Additional Finite Element Method (AFEM) is used. AFEM is a variant of the Finite Element Method (FEM) for nonlinear analysis of structures according to the forms of collapse. From the FEM point of view, this problem is the analysis of the structure with some nonlinear properties. The author of this paper suggested and worked out AFEM, which realizes such analysis due to rational iterative process for solving of the set of equations. After fulfillment of this main operation, the problem may be considered to be determined. The end and the direction of iterative process are defined under the condition of an ideal failure model, which is the design diagram of the structure at the moment preceding the collapse. Additional design diagrams and additional finite elements (AFEs) are used for introduction of some units of methods of Limit States (Ultimate Equilibrium) and Additional Loads (Elastic Decisions). This is necessary for creation of an iterative process according to the introduced criterion of collapse. The example of such iterative process is given in the paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ermakova AV (2007) Metod dopolnitel’nykh konechnykh elementov dlya rascheta zhelezobetonnykh konstruktsiy po predel’nym sostoyaniyam (Additional finite element method for analysis of reinforced concrete structures at limit states). ACV, Moscow
Ermakova AV (2012) Additional finite element method for analysis of reinforced concrete structures at limit states. ACV, Moscow
Ermakova AV (2016) Additional finite element method for analysis of reinforced concrete structures at limit states. ACV Construction, Stockholm
Ermakova A (2016) Additional finite elements and additional loads for analysis of systems with several nonlinear properties. In: 2nd conference ICIE-2016 vol 150, pp 1877–1823
Zienkiewicz OC (1975) Metod konechnykh elementov v tekhnike (The finite element method in technique). Mir, Moscow
Ilyushin AA (1948) Plastichnost’ (Plasticity). Gostechizdat, Moscow
Postnov VA (1977) Chislennye metody rascheta sudovykh konstruktsiy (Numerical methods of analysis of ship structures). Shipbuilding, Leningrad
Gvozdev AA (1949) Raschet nesushchey sposobnosti konstruktsiy po metodu predel’nogo ravnovesiya (Analysis of bearing capacity of structures by limit state method). Stroyizdat, Moscow
Ermakova AV (2009) Actual problems of nonlinear design of reinforced concrete structures. Int J Comput Civ Struct Eng 5(1, 2):23–34
Ermakova A (2012) Solving some problems of nonlinear analysis of reinforced concrete structures by additional finite element method. In: Role for concrete in global development. Conference “Concrete in the low Carbon Era”, UK Scotland, Dundee, July 2012, pp 763–772
Ermakova A (2017) Ideal failure models of structures for analysis by FEM and AFEM. In: 3rd conference ICIE-2017 vol 206, pp 9–16
Ermakova A (2017) Ideal’nye modeli razrusheniya konstruktsiy dlya nelineynogo rascheta metodom dopolnitel’nykh konechnykh elementov (Ideal failure models of structures for nonlinear analysis by additional finite element method). Struct Mech Anal Constr 6:46–50
Ermakova A (2010) Osnovnaya razreshayushchaya sistema lineynykh algebraicheskikh uravneniy metoda dopolnitel’nykh konechnykh elementov (Main solving system of linear algebraic equations of additional finite element method). Struct Mech Anal Constr 4:74–78
Gorodestky AS, Evzerov ID (2007) Komp’yuternye modeli konstruktsiy (Computer models of structures). Fact, Kiev
Karpenko NI (1996) Obshchie modeli mekhaniki zhelezobetona (General mechanics models of reinforced concrete). Stroyizdat, Moscow
Shugaev VV (2001) Inzhenernye metody v nelineynoy teorii predel’nogo ravnovesiya obolochek (Engineering methods of nonlinear theory of limit equilibrium of the shells). Gothic, Moscow
Karyakin AA (1989) Chislennye metody resheniya zadach stroitel’stva na EVM (Numerical methods of solving of structural problems by computer). ChPI, Chelyabinsk
Oatul AA, Chelyabinsk ChPI (eds) (1980) Raschet i proektirovanie elementov zhelezobetonnykh konstruktsiy na osnove primeneniya EVM (Computer-aided analysis of reinforced concrete structural elements) Part 4
Eurocode 2. Design of reinforced concrete structures. Part 1-1/ TKP EN 1992-1-1-2009 (02250)
Ermakova AV (2013) Osobennosti nelineynogo rascheta zhelezobetonnykh konstruktsiy po predel’nym sostoyaniyam MDKE (Singularities of AFEM realization of nonlinear analysis of reinforced concrete structures at limit states). Struct Mech Anal Constr 5:65–70
Ermakova AV (2016) Razvitie idey A.A. Il’yushina v metode dopolnitel’nykh konechnykh elementov (Development of A.A. Ilyushin’s ideas in additional finite element method). Struct Mech Anal Constr 3:56–63
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Ermakova, A. (2019). Iterative Process of AFEM and Ideal Failure Models of Structures. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 4th International Conference on Industrial Engineering. ICIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-95630-5_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-95630-5_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95629-9
Online ISBN: 978-3-319-95630-5
eBook Packages: EngineeringEngineering (R0)